- Messages
- 17,767
mbox 0.5 build 0007 AZBOX by mower
Just fix for Azbox, old API in use.
Just fix for Azbox, old API in use.
for pacht 1759
replace in the azboxhd OpenXCAS and put this :
in the:
/EMU/OpenXCAS
mbox_module a 755
module.seq a 755
openxcas.conf a 755
in the;
/EMU/OpenXCAS/MboxCAS
cwshare.cfg a 644
ident.info a 644
ignore.list a 644
mbox.cfg a 644
mbox.prio a 644
mbox_module a 755
openxcas.conf a 755
mbox.sh a 755
port.list a 644
Added my "How to" in English and Serbo-Croat!:heart===== MBOX by The_Ripper ===== ,xxxxxxxxxxxxx
0.5 BETA build 0015
=======================
-Fixes.
-Changed S line for sssp, now S: { com_device baud } , valids baud -> 115200,57600,38400,19200,9600
-Added sending M*** messages to peers.
Probe and Running with the 1759 and 1868 Firmware;For we have fewer problems with the configurations
This is the Version B 020Fix MBOX 05 that can get the ground floor of Glina and this same Version
Enter al AzBox by FTP
Sustituye the OpenXCAS folder of your HD AzBox Elite that within the EMU by the Folder that this subo here:
En:
/ EMU / OpenXCAS
module.seq to 755
openxcas.conf to 755
En;
/ EMU / OpenXCAS / MboxCAS
cwshare.cfg to 644
ident.info to 644
ignore.list to 644
mbox.cfg to 644
mbox.prio to 644
mbox_module to 755
openxcas.conf to 755
mbox.sh to 755
port.list to 644
Thx savior
Mbox 6 0001 que se le pueden meter solo GLines y por desgracia solo funciona bien con los que tengan ese mismo protocolo la 1.0C osea solo con la misma Mbox.
Entra al AzBox por FTP
Sustituye la carpeta OpenXCAS de tu AzBox HD Elite que esta dentro de de la Carpeta EMU por esta que subo aqui:
Mira que los atributos esten asi.
En:
/EMU/OpenXCAS
module.seq a 755
openxcas.conf a 755
En;
/EMU/OpenXCAS/MboxCAS
cwshare.cfg a 644
ident.info a 644
ignore.list a 644
mbox.cfg a 644
mbox.prio a 644
mbox_module a 755
openxcas.conf a 755
mbox.sh a 755
En la cwshare.cfd pongo una Pequeña explicación de como van o se ponen las GLines
Para arrancar la Mbox desde el Mando a distancia:
a) Pulsa el Botol Azul "HOME"
b) Pulsas sobre Plug-Ins
c) Pulsas sobre OpenXCAS
d) Pulsas sobre Activation & Priority Setting
e) una vez ahí miras que la Mbox este Activada, osea que no tenga una # delante, si es asi activala pulsando el Boton Azul "I-KEY"
f) pulsa el Botón Amarillo "LANG" para arrancar la Mbox
g) para salir del Menú; Pulsa el Botón Azul "HOME" y pulsas sobre TV
configuracion de nuestro amigo [COLOR="Red"]DREAM 7 [/COLOR][/B]
Probada y Funcionando con la Firmware 0.9.2238
Para que tengais menos problemas con las configuraciones
Esta es la Version Mbox 6 0006 que se le pueden meter solo GLines y por desgracia solo funciona bien con los que tengan ese mismo protocolo la 1.0C osea solo con la misma Mbox.
Entra al AzBox por FTP
Sustituye la carpeta OpenXCAS de tu AzBox HD Elite que esta dentro de de la Carpeta EMU por esta que subo aqui:
Mira que los atributos esten asi.
En:
/EMU/OpenXCAS
module.seq a 755
openxcas.conf a 755
En;
/EMU/OpenXCAS/MboxCAS
allow.list a 644
cwshare.cfg a 644
ident.info a 644
ignore.list a 644
mbox.cfg a 644
mbox.prio a 644
mbox_module a 755
openxcas.conf a 755
mbox.sh a 755
En la cwshare.cfd pongo una Pequeña explicación de como van o se ponen las GLines
Para arrancar la Mbox desde el Mando a distancia:
a) Pulsa el Botol Azul "HOME"
b) Pulsas sobre Plug-Ins
c) Pulsas sobre OpenXCAS
d) Pulsas sobre Activation & Priority Setting
e) una vez ahí miras que la Mbox este Activada, osea que no tenga una # delante, si es asi activala pulsando el Boton Azul "I-KEY"
f) pulsa el Botón Amarillo "LANG" para arrancar la Mbox
g) para salir del Menú; Pulsa el Botón Azul "HOME" y pulsas sobre TV
gracias [COLOR="Red"]Dream7[/COLOR][/B]