can someone tell me what loader is used for starsat sr 1000hd plss?
thanks for helping
sorry for asking again. i have loaded the starsat sr 1000 hd v1.60 .before loaded that software i used to watch al jazerra sport +1 till 10. now i cannot watch them. i load the software with the usb. the stb latest software is v 1.60
thankss for helping
i tried this as well.
FTPDownload upgrade:
''Connect net wire to STB, After start enters Installation-- >FTPDownload menu, choose download type to “Main S/W”, press OK to start download and do automatic upgrade, after finish appears prompt “restart or not”.''
and when pressing ok it tells me cannot connect to server.
thankss for helping
For start G-share and open Channels
You must enable firmware and active server
enable firmware
button F1 and then Three times button 0 = F1+000
and then
For active server
button F1 and then Three times button 1 = F1+111
i done f1 + 000 = patch enabled
then f1 + 111 = asking if i want to delete the g share server. yes or no??
selected no and tells me server disabled. should i tried f1 + 111 again?NO delete G share Server
Select No
selected no and tells me server disabled. should i tried f1 + 111 again?
For active server
button F1 and then Three times button 1 = F1+111
And answer yes to enable server
server is activated automatically when i press f1 + 111. not telling me to select. but still nothing happing
I'm confused
check the internet conection and LAN Cable
Whether cable is healthy?
Whether the recipient is connected to the Internet?
do you connected to the Internet?
do you enable server
just aljazeera closed?
another channels is open?
Whether cable is healthy?
Whether the recipient is connected to the Internet?
do you connected to the Internet?
do you enable server
just aljazeera closed?
another channels is open?
do i need to do something in the server settings. ie:
tcp port and ip are blank
do i need to do something in the server settings. ie:
tcp port and ip are blank