there is a lnb in (where my sat dish is connected to) and a lnb out in the ipbox9000hd can i take a cable and connect it to lnb out and then to another tv ? so the channel that is showing on the ipbox will be shown on the tv that is connected to lnb out ??
You can use two cables from receiver but you can see only same channel on 2 tv. You can't changes channel on one tv only on both because video signal is same on two cables.
one way is to buy a rf modulator and connect it up by scart (your video may do the same job), you will then need to turn the pic res down to sd to enable the scart. You can then watch in low res via your hdmi on your main tv and via the rf modulator on the others
yes with the modulator you can as @bacardi say's...in the market they sell many diffrent ones...you can use you box where the pin out yellow-white-red you will connect from that to modulator useing yellow-white then pass a normal coax cable to ur other tv rf in ......and make a manual scan on your tv...
or with out the modulator you can pass a cable from your box yellow-white pin connrctions to your other tv if you have the same connection on your tv set (yellow-white) will do the the same job with out a modulator...