JTAG INTERSTAR HOW TO
1st TOOLS U NEED :
2nd how to made a cable :
2nd how to connect it with receiver :
4th install driver GiveIO.sys on your pc
5th now start jtag :
1st TOOLS U NEED :
1-ej-flacher + driver for cable inst_giveio.exe (attached here )
2-masterboot for your RECEIVER
3-and of course a soft
2-masterboot for your RECEIVER
3-and of course a soft
2nd how to made a cable :
![cable2hn.jpg](http://img304.imageshack.us/img304/2493/cable2hn.jpg)
![sch9rr.png](http://img409.imageshack.us/img409/167/sch9rr.png)
![118yw.png](http://img49.imageshack.us/img49/8045/118yw.png)
![33c4489bf517.jpg](http://d.foto.radikal.ru/0607/33c4489bf517.jpg)
![de702a51e7db.jpg](http://d.foto.radikal.ru/0607/de702a51e7db.jpg)
2nd how to connect it with receiver :
![jif9hb.png](http://img68.imageshack.us/img68/5011/jif9hb.png)
![3b3bfcbc85f9.jpg](http://d.foto.radikal.ru/0607/3b3bfcbc85f9.jpg)
4th install driver GiveIO.sys on your pc
5th now start jtag :
![90765017ax5.jpg](http://img53.imageshack.us/img53/8210/90765017ax5.jpg)
![41708440pl3.jpg](http://img507.imageshack.us/img507/3486/41708440pl3.jpg)
![48740376ad5.jpg](http://img507.imageshack.us/img507/2070/48740376ad5.jpg)
1- press detect devis to know if every things r ok.
2- if all ok press erase button and chose ( from 3 ) erase main program then boot loader then press start (4) on both actions.
3- when erase is full press program flash (5) then chose boot loader file (6) to upload it to dsr
2- if all ok press erase button and chose ( from 3 ) erase main program then boot loader then press start (4) on both actions.
3- when erase is full press program flash (5) then chose boot loader file (6) to upload it to dsr
![98674191ib7.jpg](http://img507.imageshack.us/img507/4867/98674191ib7.jpg)
4- when programing is full close ejflasher and upload software with stb loader ( normal loader)