I Need massive help with this softcam.key file.

Z

Zugzwang

Registered
Messages
58
Hello.
As you can see I am a newbie and I am quite frustrated because I'm trying to watch tv for 12 hours already but I can't.
So this is how things looks like:
8xn3p2.png

I see this CW, but in my softcam.key file I have this things:
10r5k7m.png

As you can see on the 1st picture there is only a CW and in this softcam.key file there is a lot more symbols. So under which of these sections I have to enter the This 1st key in order to decrypt this feed? How should I change my softcam.key file so I can manage to watch it. I get the channel but I don't know what to do with this file...
 
Last edited:
barney115

barney115

Donating Member
Staff member
Administrator
Messages
24,767
Might be Fairly helpfull if you would have at least mentioned What Reciever your actually using ?? :confused:
maybbe then someone can give you a more accurate answer .
but really everything was already answered on my above link anyhow : ))
 
Z

Zugzwang

Registered
Messages
58
I have Octagon DVB-S2 HD Satellite STB SF8 HD.
I can not enter keys from the remote. However I've tried to enter them from the softcam.key file. What I did so far:
I found the file with FTP CLient, downloaded it and changed it. for example for this case I did this: with astana and legia game (1st picture in my 1st post) i tried to enter the code like this:
F 00011FFF 00 XXXXXXXXXXXXXXXX ;KAZ 004 (7E)
F 00011FFF 01 XXXXXXXXXXXXXXXX ;KAZ 004 (7E)

This line i copy in the softcam.key file. I am doing it under the "BISS PROVIDERS" line in softcam.key file (the 2nd picture from my 1st post ).
Then I reenter the softcam.key file in the receiver with FTP.
Restarting the receiver and nothing hapens.
Tried with enter another like is said in the thread SID + VIDEO ID:
F 00010200 00 XXXXXXXXXXXXXXXX ;KAZ 004 (7E)
F 00010200 01 XXXXXXXXXXXXXXXX ;KAZ 004 (7E)

Again nothing.

Tried few other things - again nothing. I don't know whats going on but its obviously something wrong...
 
Last edited:
Z

Zugzwang

Registered
Messages
58
Yes I think I can operate with this file. Its even in my Open source interface - its the last oscam file in the interface. However I can't understand what to write on there, because its empty. Maybe If I try to enter the same?? Or ? Can please someone help me: In this case the 1st picture in my 1st post - when there is only a cw and nothing more - how the code in the constant.cw should look like ?
 
S

slugworth

Registered
Messages
336
some receivers let you save a .cw to compare with or maybe google it.some receivers ignore any biss keys in a softcam and you have to load a constant.cw file.
 
Z

Zugzwang

Registered
Messages
58
Is it possible the emulator of my receiver to not working? I should certainly look for a proper receiver then ?
 
Z

Zugzwang

Registered
Messages
58
fiji said:
If hd box work with mgcamd biss keys then please check it I add your keys in this softcam .
Softcam Download
Click to expand...
The problem is not with the softcam key file. I think.
But:
Lets try with you - would you please send me this new softcam.key file but with this code entered:
http://www.sat-universe.com/showpost.php?p=2036805745&postcount=226
So I can see the program is there but I can't watch it. Could you please entere the codes and give me the softcam.key file again.
And If everything is ok it should decrypt it right? When put it in my receiver's softcam directory? Could we try this Please?
 
Last edited:
fiji

fiji

Member
Messages
1,087
Zugzwang said:
The problem is not with the softcam key file. I think.
But:
Lets try with you - would you please send me this new softcam.key file but with this code entered:
http://www.sat-universe.com/showpost.php?p=2036805745&postcount=226
So I can see the program is there but I can't watch it. Could you please entere the codes and give me the softcam.key file again.
And If everything is ok it should decrypt it right? When put it in my receiver's softcam directory? Could we try this Please?
Click to expand...

Now click on softcam download previous new link again
Add 12545 H 7123 : Arqiva HD3 biss & mgcamd provider
 
D

dale_para_bajo

Registered
Messages
646
@Zugzwang

HEHEHEHEHE You seems lost and you end up doing wrong things.

Listen you need to see what type of user you are.

You want the latest
You want to try it all
Then you need to be patience, read, read did I say read... Oh Ok and learn. Things can take days or week until you learn and make it work,

Or
You are Lazy!
You have a Wife & Kids that do not like to red and learn.
But willing to sacrifice and stay with what ever a low none Linux device can offer. In the other hand all what the receiver can do will be in simple press of a button.

You can not have both?

I sadly can not help you as I have 0 to none experience in enigma boxes. But I see you have one. I suggest to take things slowly and try to learn what you have.

Now please notice that Moderators do not like people writing almost same thing in different threads. And that you can NOT post Keys in public areas. Keys go to the Key area only. I know you will not get in trouble as hope mods read this try to help an undecided lost user.

Noe imagine all problems have nothing to do with receiver. You go buy 10 more receivers and all will fail. Maybe you are in another sat, or that transponder is weak and picture will not open. Who knows.
 
fiji

fiji

Member
Messages
1,087
Zugzwang said:
Tank you mate. Tank you very much!!! This means that I am not doing anything wrong! Its not working. I've tried to open it the same way with the same file, its not working!
So could you please help me with this:
http://www.sat-universe.com/showthread.php?t=302131
I'll try to do it until I succeed :)
Click to expand...

please witch channels presently open with biss ?
with your provided softcam.keys . in your linux box
linux box is different procedure of biss keys
I want to know example data in softcam if open any channel
then may be i can help u better .
 
Z

Zugzwang

Registered
Messages
58
dale_para_bajo said:
@Zugzwang

HEHEHEHEHE You seems lost and you end up doing wrong things.

Listen you need to see what type of user you are.

You want the latest
You want to try it all
Then you need to be patience, read, read did I say read... Oh Ok and learn. Things can take days or week until you learn and make it work,

Or
You are Lazy!
You have a Wife & Kids that do not like to red and learn.
But willing to sacrifice and stay with what ever a low none Linux device can offer. In the other hand all what the receiver can do will be in simple press of a button.

You can not have both?

I sadly can not help you as I have 0 to none experience in enigma boxes. But I see you have one. I suggest to take things slowly and try to learn what you have.

Now please notice that Moderators do not like people writing almost same thing in different threads. And that you can NOT post Keys in public areas. Keys go to the Key area only. I know you will not get in trouble as hope mods read this try to help an undecided lost user.

Noe imagine all problems have nothing to do with receiver. You go buy 10 more receivers and all will fail. Maybe you are in another sat, or that transponder is weak and picture will not open. Who knows.
Click to expand...
Believe me I know how an active feed looks like. I open FTA feeds, I open them without a problem. I know what I need. And believe me I am doing everything I can, not only writing in the forum. I saw and know now that my emulator doesn't work, because its not opening any coded channel. However I do not whine, I will reinstall its software tomorrow.
As far as the KEYS posting - ThESE are pictures of keys. Which will self delete after a while. I am not writing anything - I am putting screens. Which is different (moderators know why).
So please - there isn't easy ways. I spend a lot of time and effort and I will continue till I do it. Tanks to all of you who are trying to help me I appreciate it. I'm not standing and waiting for it to go from itself. And I will do it after all...
 
Last edited:
You must log in or register to reply here.
Top