Humax 5X00 set Error Codes.

ggiuseppe

Registered User
Messages
1,728
This is a full list of Humax 5X00 error messages with indications about how to solve them.
E-HC/bC Incorrect header block (CRC-16) The software seems damaged while you receive from web site or e-mail. Pls receive the software again and try to download.

E-dC Incorrect data block (CRC-16) The software seems damaged while you receive from web site or e-mail. Pls receive the software again and try to download.

E-Hn/bF Invalid HDF version This error can be occured when you attempt to download Non-Superset STB software to Superset or Vice-Versa. Pls check the STB model and the software.

E-Id Invalid system ID This error can be occured when you attempt to download F1 software to F1-CI. Pls check the STB model and the software.

E-AC Incorrect application (CRC-32) Download latest version of application S/W.
E-ut UART RX/TX time out There is communication problem between source and target.

1) Check whether the S/W is compressed or not and Check whether you use the proper download tool for the software.
2) Reduce the download speed and try to download again.
3) STB main power Off/On and try to download again.
4) Reset the PC and try to download again.

E-Ad Invalid address Humax made the hdf file with wrong address. Pls notify this error to us and wait until we release the proper software.

E-Ao Invalid offset address for upload (Odd offset) There was a mistake when we made hdf file from binary file. Pls let us know immediately and wait new release version.

E-Ft Flash program time out The flash memory in STB seems damaged. Pls try to download one more time. If you fail agian, send us back to replace the flash memory device.

E-It/Et EEPROM program time out The EEPROM in STB seems damaged. Pls try to download one more time.
If you fail again, replace the EEPROM device.

E-FE Fail compare after flash write Flash memory is damaged. Return the main board (CPU Board).

E-HF Invalid HDF Format Humax made the hdf file with wrong version. Pls notify this error to us and wait until we release proper software.

E-Fn Invalid flash device Flash memory is defected Need to change the flash memory so Pls return the Main Board.

E-AS Incorrect application size Check the software version and STB hardware specification.

E-IC This error is very similar to E-AC Download latest version of application S/W.
Regards.
 

ig0r

Administrator
Messages
7,161
short list

E-IC - Please download again
E-FE - Fail compare after flash write
E-HF - Invalid HDF Format
E-Ad - Invalid address
E-Ao - Invalid offset address for upload(Odd offset)
E-Id - Invalid system ID
E-Hn/bF - Invalid HDF version
E-Fn - Invalid flash device
E-HC/bC - Incorrect header block(CRC-16)
E-dC - Incorrect data block(CRC-16)
E-AS - Incorrect application size
E-AC - Incorrect application CRC-32
E-ut - UART RX/TX time out
E-Ft - Flash program time out
E-It/Et - EEPROM program time out
 
Top