DM800se HD Firmware update via browser'' What you need to update the firmware:You need a current image. Such an image for the DM800HDse has the extension *. nfi.It is not flash other images like *. img!Please try not, it does not work.You need either a DHCP server on your Network, a configured bootloader or a serial null modem cable and a terminal program like Hyper Terminal.You need a browser and a network cable. Connect your Dreambox directly to a PC, you need a cross-over "(rotated) network cable, if you connect through a switch / hub / router you need a" Non-Cross "(not twisted) network cable.To flash a new image to the Dreambox, you have the "2nd stage loader in place and undamaged.The next steps refer to a network with a DHCP server running.
- (1) Press the standby button on the front panel and hold it.Now insert the plug of the power supply back into the box.- (2) A text "*** STOP ***"should appear. Now you can release the button.The boot loader is now in "wait mode".- (3) Above the "*** STOP ***" text, there should now display an IP address are displayed.(four decimal places, separated by a period).If there appears the "DHCP" instead of an IP address, the box still searches for a DHCP server. Wait a bit.However, should appear after a short time an IP address, please check your DHCP server settings and the wiring of your network.If it does not work, please set manually via a serial console, the IP of your box.
- Now open a browser on your PC.(1) Enter the IP address in the address field of the ”ip/”field.(enter the IP address displayed in the LCD).(2) Press the "firmware upgrade" to the page displayed in the browser.
-On the next page you can select the desired image you want to flash the box. Please note the file extension *. nfi to play thatother images is not possible (NO *. img)!- Click to select the images to the "FLASH!" and wait untill it has been transferred completely to the image and flashed.-Turn the box off and then on again.The new operating software should now be recorded, and reboot. ''
- (1) Press the standby button on the front panel and hold it.Now insert the plug of the power supply back into the box.- (2) A text "*** STOP ***"should appear. Now you can release the button.The boot loader is now in "wait mode".- (3) Above the "*** STOP ***" text, there should now display an IP address are displayed.(four decimal places, separated by a period).If there appears the "DHCP" instead of an IP address, the box still searches for a DHCP server. Wait a bit.However, should appear after a short time an IP address, please check your DHCP server settings and the wiring of your network.If it does not work, please set manually via a serial console, the IP of your box.
- Now open a browser on your PC.(1) Enter the IP address in the address field of the ”ip/”field.(enter the IP address displayed in the LCD).(2) Press the "firmware upgrade" to the page displayed in the browser.
-On the next page you can select the desired image you want to flash the box. Please note the file extension *. nfi to play thatother images is not possible (NO *. img)!- Click to select the images to the "FLASH!" and wait untill it has been transferred completely to the image and flashed.-Turn the box off and then on again.The new operating software should now be recorded, and reboot. ''