How to manually enter keys in Humax5400
--------------------------------------------------------------------------------
How to Enter Keys with Remote Control on Humax5400
=====================================
To Enter the KEYS with remote control, you must have ToH-HoT Firmware
If you know the Encryption(Irdeto, Viaccess,…) type and the Provider, please do the following:
1)Go to Menu, ToH, then Ram Editor.
2)Choose the Encryption Type, SECA(Red), Viaccess(Green), Nagra(Yellow), Irdeto(Blue) or Conax(White).
3)Choose the Provider with the Right/Left arrow or Push OK to create a new Provider.
4) Enter the Provider Code with the Remote Control then Press OK.
5)Move to the KEY 00… with the arrows then press enter to enter the new key, then Press OK.
6)Press Exit to Exit.
If you don’t know the Encryption(Irdeto, Viaccess,…) type or the Provider, please do the following:
1)Switch/Move to the channel which you want to enter the KEYS for.
2)Go to Menu, ToH, then Ram Editor.
3)Encryption Type, Provider will be displayed for the current channel.
4)Move to the KEY 00… with the arrows then press enter to enter the new key, then Press OK.
5)Press Exit to Exit.
N.B.
===
*You can move Up/Down Right/Left with the corresponding arrow on the Remote.
**To Enter HEX Numbers with the remote, use the number on the Remote from 0 to 9 and Mute for A, Red for B, Green for C, Yellow for D, Blue for E and White for F.
--------------------------------------------------------------------------------
How to Enter Keys with Remote Control on Humax5400
=====================================
To Enter the KEYS with remote control, you must have ToH-HoT Firmware
If you know the Encryption(Irdeto, Viaccess,…) type and the Provider, please do the following:
1)Go to Menu, ToH, then Ram Editor.
2)Choose the Encryption Type, SECA(Red), Viaccess(Green), Nagra(Yellow), Irdeto(Blue) or Conax(White).
3)Choose the Provider with the Right/Left arrow or Push OK to create a new Provider.
4) Enter the Provider Code with the Remote Control then Press OK.
5)Move to the KEY 00… with the arrows then press enter to enter the new key, then Press OK.
6)Press Exit to Exit.
If you don’t know the Encryption(Irdeto, Viaccess,…) type or the Provider, please do the following:
1)Switch/Move to the channel which you want to enter the KEYS for.
2)Go to Menu, ToH, then Ram Editor.
3)Encryption Type, Provider will be displayed for the current channel.
4)Move to the KEY 00… with the arrows then press enter to enter the new key, then Press OK.
5)Press Exit to Exit.
N.B.
===
*You can move Up/Down Right/Left with the corresponding arrow on the Remote.
**To Enter HEX Numbers with the remote, use the number on the Remote from 0 to 9 and Mute for A, Red for B, Green for C, Yellow for D, Blue for E and White for F.