How to get my IPBox9000 to work with my 36v positioner

[dypcdiver]

I am unable to get my IPBox9000 to control my 36v motorised dish.
Other receivers have worked using DiseqC 1.2 to the Superjack Vbox2 positioner (non usals), but all the attempts with DSG and E2 images have failed. Has anyone got it working and if so how?

 

[catseye]

Try PKT E2 7.5.1 the latest version

Then in sat config menu set to advanced, lnb1, & disque 1.2 & scroll down & store your sat postitions as required

 

[dypcdiver]

Hi Catseye, thanks for that I didn't realise that it went to a second page! I have just tried it and with no luck I shall keep trying though. For some reason the IPBox does not seem to send a signal to the positioner.

 

[malakudi]

The superjack vbox ii positioner is incompatible with cuberevo boxes. There is no problem with enigma2, it is a hardware limitation (I know because I had the same positioner). I changed it with a Gbox V4000 and it worked great!

 

[dypcdiver]

Thanks Malakudi
Seems either Superjack or IPBox are being economical with the truth when they both say compatible with DiseqC 1.2!!

 

[catseye]

Hi Catseye, thanks for that I didn't realise that it went to a second page! I have just tried it and with no luck I shall keep trying though. For some reason the IPBox does not seem to send a signal to the positioner.

When you have saved your position reboot gui sometimes it takes a few times to get it working & could still have bugs present

 

[obi-wan]

Hi
the same for me, no way to have superjack working with Ipbox with any firmware installed !!
Please someone can tell me if Moteck V-Box II is compatible with IpBox ??

Thanks a lot

cu