help with hdvb server/client cccam for dvbcards

[weejake]

hi. i do not know how to connect the F LINES in the set up for hdvb-plugin .
i have placed the plugin with the dvbviewer plugins folder.
all my f-lines say disconnected with the cccam moniter

please can someone help on how to make the fline connect within dvbviewer

 

[weejake]

basically i want to reshare existing cline to dvbcard on another computer.

the f lines are discconnected
using dvbviewerplugins
is there anyway to do this
anyone???????????????

 

[magictails]

hi

only write correct F: line on ccam.cfg and active plug in
check no ip software instal in pc and correct setting
check dns adresse in no ip plug in in HDVb

for DVB viewer : SOFTCSA pack required for plug in works

@ +

 

[weejake]

magictails.
i already have a static ip address from my isp.
do i still need a seperate dns address?

 

[weejake]

i need to reshare cline
do i configure fline for the dvbviewer plugin.
how do i do this please

 

[magictails]

HDVB.dll 123 for pc put folder in C:\HDVB
HDVB.dll 103 for plug in card sat ( put file in plug in pip00 for dvbdream or folder Mdplugin for dvbviewer pro )

look older version posted in cs section dvb for dl rar


are you : " no.ip.exe" instaled and correct setting in your pc


for dvb viewer software work with emu or cs plug in

use softCSA
and active this for other plug in (acamd hadu vplug HDB ) works
no soft csa no emu works

look in emu section for softcsa.rar

C:\Program Files\DVBViewer\plug in\softcsa dll & ini
C:\Program Files\DVBViewer\ CSA & Ffcsa& & mafocsa.dll
C:\Program Files\DVBViewer\MDplugins\hdvb.dll & ini 1.0.3

put folder HDVB 123 in C:\HDVB and create shorcut to desktop
set HDVb ini for F & c line

star the soft DVBviewer pro ( for hd channel ) go to menu > plugin <
active CSA for decode all
activate HDVB

start HDVB shorcut
go to option
activate plug in dvb
activate the com port
set no ip option and start this

tick : ccam emu

@ +

 

[weejake]

ok i have it working thanks..
but the problem is i use dual tuner.record one channel -watch another channel at same time.
before i was able to use plugins1/plugins2 folders.
how can i get this to work using mdplugins????

 

[magictails]

for use no official plug in (emu or cs )DVbviewer 4.2.1

use softcsa for work = only" active "softcsa in menu dvbviewer >plugin > softcsa

after other plug in work ( test with vplug 243 for local channel decrypt )

for dual tunner i dont know

test with progdvb or dvbdream for pip00 , pip1 ; ect
in DVbviewer only one folder for plug in = MD plugin


test with other plug in HDVB plugin it's note stable for me
pc 1 have dvb vierwer + HDVB plug in
but pc 2 what it's your config
soft & plug

i look pb beetwen diferente Version of CCam 2.11 2;12 of my dream or 2.14 and HDVB version 116 117 120 123 in my pc 1

test older version and N° Version

@ +

after speed test on local to my dream /ccam 214 <> pc1 with HDVB 123 & DVBviewer pro 4.2.1
C line ok & F ok on pc 1


quote

[CCcam]

Activo=1

MaxHop=5
#NodeID=
#CaidPr=
#NooSid=

CCEMU=0

#Client
#F: 12000 user pass 5 0 0
F: 12000 user pass 5 0 0 = no ip local and no dns to write

#Server#
#C: server.no-ip.org Port Username Password 0
C: 192.168.1.12 12000 username password 0 = ip of my dream

#C: reyes21romeo.hopto.org 12000 JSC174 startimes2 0

#C: flymw.no-ip.biz 18000 flydahli163 81O4r2 0

[CCcamLinux]

Activo=0
#Linux
Addres=192.168.1.15 10000


for me it's ok connected client /server

 

[magictails]

tested with dvbdream v1.5B
& C:\HDVb 123 ( MD api 3.00 1.06 )& HDVB plugin 103 in pip 00 with same setting in quote

F and C line ok connected

channel descramble ok

@ +

 

[weejake]

thankyou magictails for all your help..i have tried this setup but i feel my flycccam server setup plus acamd in plugins1/2 is by far a better setup for my dual tuner system plus 2nd pc.
its simple and effective working setup.

thanks again but i will stay with what i already have.

 

[fundom]

How to ignore CAIDs

I have many channels which have a number of CAIDs/ECMs. But out of all these only one works. Now when HDVB is set to "autopid", it go through a loop for all these CAIDS, and in this time-limited search for DCW it misses even from the right CAID. How can I make HDVB ignore non-working CAIDs while still working in "autopid" mode.

 

[dotsy]

hello I to install HDVB then I put the plug in the plug in case of progdvb I took my ccam server except that ca not decrypt the ECM passse goods chain in HDVB .thanks

 

[dotsy]

Help please