WilburSmith
Registered
- Messages
- 79
Thank you to everyone that came to my rescue! I got help from EnoSat and I'm up and running. There is a lot to learn!
No if you are up and running do not do anything that could jeopardise that. The post i made earlier was meant if you have not got a resolution. Leave it working as it should be.I found this link about levi45:
I'm not sure what 'multicam' means. Maybe it handles multiple encryption types? But apparently when it is installed it can receive from the Internet latest key updates.Levi45 Multicam Manager - Linux Satellite Support Community
This plugin comparable with PY2 and PY3 , also compatible with any enigma2 boxes with any image .All thanks goes to my very good friend lululla for allowing me to use his code and helping me continuously to bring this plugin to live.what you can do with…www.linuxsat-support.com
Not sure if this makes sense to install or causes problems with other things now working?
If you guys have more learning links that would be helpful. Thank you!
No if you are up and running do not do anything that could jeopardise that. The post i made earlier was meant if you have not got a resolution. Leave it working as it should be.
Learning curve yes, big learning curve!!........................'the levi45addon file'after sorting with, thanks.There is also another option that @WilburSmith can try that could be a little easier. Attached is the levi45addon file. It can be put on a usb stick and installed on a box via the ipk installer or media browser. Its has all the latest cams such as ncam 14.# and that has lots of configs built in. Within the package you can also download softcams which can be updated online and also an option to be able to input keys via the remote directly into the softcam.
There is no encrypted channel; they are all FTA:105W has 3 VA channels. 1 powervu 2 others are FTA. TheFTA channels have always had something on when I checked. See: https://www.tvrosat.com/cgi-bin/charts.cgi
DVB-S2 8PSK 9500 2/3 |
| Veterans Affairs Knowledge Network | | 6.6 | Cpr43 230306 | ||||
1 | Veterans Affairs Knowledge Network 1 | MPEG-4/HD | 100 | 710 Eng | |||||
2 | Veterans Affairs Knowledge Network 2 | MPEG-4/HD | 800 | 810 Eng | |||||
3 | Veterans Affairs Knowledge Network 3 | MPEG-4/HD | 300 | 310 Eng |
Why does it show as encrypted on TVROSAT? Why does it show as encrypted with powervu on my satellite receiver when I navigate to the channel? How come I can't see this encrypted channel but the other two I can?There is no encrypted channel; they are all FTA:
DVB-S2
8PSK
9500
2/3Veterans Affairs Knowledge Network 6.6 Cpr43
230306 1Veterans Affairs Knowledge Network 1 MPEG-4/HD 100710 Eng 2Veterans Affairs Knowledge Network 2 MPEG-4/HD 800810 Eng 3Veterans Affairs Knowledge Network 3 MPEG-4/HD 300310 Eng
Tvrosat listing is from 2022, lyngsat.xxx listing is from 2023.Why does it show as encrypted on TVROSAT? Why does it show as encrypted with powervu on my satellite receiver when I navigate to the channel? How come I can't see this encrypted channel but the other two I can?
TVROSAT is only updated when there are changes. But you still need to explain why my satellite receiver shows VA Network 1 as encrypted with PowerVu. TVROSAT is good for those in North America.Tvrosat listing is from 2022, lyngsat.xxx listing is from 2023.
The channels were last scanned and updated in 2023. tvrosat sometimes do not scan tp's too often to notice changes in channel listing and/or encryption changes. Some tvrosat listings, still shows no more existing tps with old, old channels.. I always compare listings from lyngsat and tvrosat, with my scans. Do a fresh scan, and your osmio with vix or tnap5 image will show you on the upper left corner of the screen, all info for the channel you are viewing. When I find changes I notify lyngsat, and not tvrosat witch takes forever to send them a notice. Sometimes tvrosat publishes "new", nonexisting tp., or tps with wrong digits...The owner of tvrosat site is also the owner of TEK2000 webstore (very expensive, & not reliable), and it looks he is more interested to use tvrosat as an advertising place for tek2000 products..., but you should believe whatever channels listing you want. Good luck.TVROSAT is only updated when there are changes. But you still need to explain why my satellite receiver shows VA Network 1 as encrypted with PowerVu. TVROSAT is good for those in North America.
Is it as simple as opening the channel and then opening LiveLog? I will try this to see what happens when I get home.Both of you attach the extract from LiveLog and you will know who is right
r (emu) csaUsed: 0, xorMode: 0, ecmSrvid: 0001, hashModeCw: 0, modeCW: 0
r (emu) channel hash: 1DB2AE2E, group id: 0000
P 1DB2AE2E GROUP 0105 ; (105W/12109V)
P 12345678 GROUP 0105 ; (sample next HASH for GROUP if uses)
P 0105 00123456 0123456789ABCD ; sample EMM key
P 0105FFFF 00 123456789ABCD ; sample key 00
P 0105FFFF 01 DCBA987654321 ; sample key 01
Moved my 103w ku dish over to 105w ku and Yep channel 1 & 2 has programming and ch.3 nothing. I found the EMM and 00 & 01 keys for CH.1 PVI cut & pasted this into softcam.key but no picture appeared. Perhaps the channel isn't broadcasting?