Help, it´s my turn, grrrr.. 910 show only booting

J

just4fun2

Registered
Messages
361
After upgrade nebula, i have tryed to reinstall my old backup PKT an error 9 appear & since...can´t flash anymore, tryed all, also with serial:mad::mecry: i can only see booting, my usb pen no more recognized...any help? thank you
 
J

just4fun2

Registered
Messages
361
mbd said:
did nebula flashed ok & worked.
error 9=flash fail
which one failed .
Click to expand...
It was my backup but maybe a wrong backup:confused: i make it but i think it took less than 1 mn with command
cat /dev/mtd7 > /hdd/all_noboot
Click to expand...
the result was a normal file big 33.292.288 bytes, then i make a file with mkdnimg.exe big 33.296.384 bytes & miniII boot, like i make all others times:confused:

this is the start of 3329288 bytes
€(?-baudrate=115200 preboot=if edb toenv ethaddr; then echo "Setup mac address."; else echo "Use default mac address."; fi; bootmenu menu_timeout=echo booting...;front_puts "booting";boot menu_serialbreak=echo entering boot loader console.;front_puts "console" menu_upgusb=setenv stdout vga;setenv stderr vga;if usbupg; then reset; else echo Oops...; echo You can debug through serial port.; fi menu_upgusbhost=setenv stdout vga;setenv stderr vga;if usbupghost; then reset; else echo Oops...; echo You can debug through serial port.; fi menu_upgserial=setenv stdout vga;setenv stderr vga;serial_upgrade;reset menu_set2set=setenv stdout vga;setenv stderr vga;serial_set2set;reset menu_hddfmt=setenv bootargs $bootargs format_hdd=1;front_puts "format
Click to expand...

this is the 33296384 bytes
¾°»Fimg P DGSlook 0  *   ü >“d\boot    þ .Ù®w8


€(?-baudrate=115200 preboot=if edb toenv ethaddr; then echo "Setup mac address."; else echo "Use default mac address."; fi; bootmenu menu_timeout=echo booting...;front_puts "booting";boot menu_serialbreak=echo entering boot loader console.;front_puts "console" menu_upgusb=setenv stdout vga;setenv stderr vga;if usbupg; then reset; else echo Oops...; echo You can debug through serial port.; fi menu_upg
Click to expand...
 
Last edited:
M

mbd

Registered
Messages
253
how old is the backup image?
since nebula is stlinux 2.4
and older images are 2.2 2.3 stlinux
they are not compatible so u have 2
reflash a full dgs image 32mb and then
any image that u like.
btw 2day i have up the real links 4 nebula
so u can try it if u like.
good luck
 
J

just4fun2

Registered
Messages
361
Thank you for trying to help..i can´t find a DGS bigger than 23-25mb but my usb wont recognise the format usb_update.img:mad:
is this the only format? also for a bootloader?
 
J

just4fun2

Registered
Messages
361
Have tryed but same result; when i power on & hold power button,
blank screen, after red leds near RS232 light up & booting appear on screen:mecry: With Pceditor, Putty, Hyperterminal or flash tool it is not communication. Have tryed also Duolabs Cas3 with the cable adaptor 20 pin : the cas say "not connected" & no "wrong decoder" so no communication also there:mecry:
 
J

just4fun2

Registered
Messages
361
Ok..so nothing to do with this receiver, i´ve spend few days & now is too much.... TO THE STRASH very soon:bang
 
You must log in or register to reply here.
Top