Help for Sly Card

[croque]

I get this from status:

HTTP Server listening on port 8888 
1970/01/01 1:00:55 1830 7608F4B0 r reader thread started (thread=7608F4B0, label=skyuk, device=/dev/sci0, detect=cd, mhz=357, cardmhz=357) 
1970/01/01 1:00:56 1830 772B6000 s init for all local cards done 
1970/01/01 1:00:56 1830 772B6000 s anti cascading disabled 
2012/09/12 12:00:51 1830 7608F4B0 r skyuk card detected 
2012/09/12 12:00:52 1830 7608F4B0 r ATR: 00 00 
2012/09/12 12:00:52 1830 7608F4B0 r ERROR: Could not read reader->convention 
2012/09/12 12:00:52 1830 7608F4B0 r Error activating card. 
2012/09/12 12:00:52 1830 7608F4B0 r ATR: 00 00 
2012/09/12 12:00:52 1830 7608F4B0 r ERROR: Could not read reader->convention 
2012/09/12 12:00:52 1830 7608F4B0 r Error activating card. 
2012/09/12 12:00:53 1830 7608F4B0 r ATR: 00 00 
2012/09/12 12:00:53 1830 7608F4B0 r ERROR: Could not read reader->convention 
2012/09/12 12:00:53 1830 7608F4B0 r Error activating card. 
2012/09/12 12:00:53 1830 7608F4B0 r card initializing error

Not sure what this means.

I did have the card working but it stopped on a machine reboot.

Any help appreciated.

 

[guli]

try restarting oscam mate , if it still does not work post your configs .

 

[seamouse]

smargo reader?

 

[Rickk]

smargo setting
mode: autoswitch

protokoll = smargo
device = /dev/ttyUSB0