HDD FAT formats support by IPBox9000

[Lonely Raven]

Hi all.
Anybody knows which FAT formats of HDD supported by IPBox9000 like FAT32, NTFS, etc. ?
Is it support Partition Table HDD resize? Primary secondary partition? Logycal Disks allocation?
Which HW should be used for initial formatting of HDD, IpBox9000 or this can be done also on PC? Is it possible under Windows?
Which better way to organize collection of Films\Music\Pictures\Backup on HDD?
Thanks.

 

[eyedoc]

Hello, Below list of all working HDD my slef i have installed the Samsung HD753LJ / 750GB / 7200rpm / S-ATA II and its workign without any problem, rember to format it when its new after installing the HDD.

Good luck


CubeRevo
3.5 inch
HITACHI
- Model : HDP725050GLA360 / 500GB / 7200rpm / SATA
- Model : HDT725032VLA360 / 320GB / 7200rpm / SATA
SAMSUNG
- Model : SP2504C / 250GB / 7200rpm / S-ATA II
- Model : HD501LJ / 500GB / 7200rpm / S-ATA II
- Model : HD753LJ / 750GB / 7200rpm / S-ATA II
WESTERN DIGITAL
- Model : WD1600AAJS / 160GB / 7200rpm / ATA II
- Model : WD2500AAJS / 250GB / 7200rpm / S-ATA II
- Model : WD2500AVJS / 250GB / 7200rpm / SATA 3Gb
- Model : WD7500AACS / 750GB / 5400rpm / SATA 3Gb / 25 dBA
SEAGATE
- Model : ST3160811AS / 160GB / 7200rpm / S-ATA II
- Model : ST3250824AS / 250GB / 7200rpm / S-ATA II ( but version G not recognized )
- Model : ST3500321CS / 500GB / 5900rpm / S-SATA II (SEAGATE Pipeline 5900.1 500GB HDD CE)
2.5 inch
FUJITSU
- Model : MHZ2320BH / 320GB / 5400rpm / SATA 3Gb / 24 dBA
Cuberevo mini
2.5 inch
SAMSUNG
- Model : HM121HI / 120 GB / 5400rpm / SATA1 1.5Gbps
- Model : HM250JI / 250 GB / 5400rpm / SATA 1.5Gbps
- Model : HM320JI / 320 GB / 5400rpm / SATA 1.5Gbps
WESTERN DIGITAL
- Model : WD800BEVS / 80GB / 5400rpm / SATA1 1.5Gbps
SEAGATE
- Model : ST9160823AS / 160GB / 7200rpm / SATA2 3.0Gbps
- Model : ST980811AS / 80GB / 4200rpm / SATA
3.5 inch
HITACHI
- Model : HDP725050GLA360 / 500GB / 7200rpm / SATA
SEAGATE
- Model : ST3320820SCE / 320GB / 7200rpm / SATA

 

[mrzouz]

Dear, I used a fat32 disk which the receiver did format it by itself into linux system file. that csn't be read under windows by itself.
there is another way to connect, (read & write) directly however I didn't really find it good.
still you can use DCC program FTP to move, add/delete movies, photos, mp3 to the hard disk.
hope this is helpful

 

[arashkhaan]

Hi in Cuberevo manual for hdd type is written sata-I only !! how is possible to use sata-II hdd?

 

[vt601]

Sata II disc's will run at sata I speeds in Cuberevo