- Home
- Forums
- HDTV And Ultra HDTV
- Other HDTV Receivers
- Clarke-Tech-Extrend HD
- Clarke Tech Extrend Linux Chat
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
HD channels doesn't work on ET9000HD
- Thread starter dxc
- Start date
Sorry, didn't edit my post in time so here's the whole post:
Hi: I just bought the ET9000HD and tried to set it up receiving from Intelsat 0.8W Thor 5/6(canal digital). The box finds all the channels, but only shows the SD channels. There no image on any HD channels, like for instance Eurosport HD.
I've set it up to use CCcam 2.2.1 and its connected to a my own dreambox server in another room with a Canal Digital card.
When I zap in to a HD channels after a while with the black screen it show an error message "no data on transponder timeout reading pat". But it's only on the HD channels.
When I tried some other settings in the tuner configuration it found and could show some few HD channels, but most of the HD channels that I usual have wasn't found on the search.
Strange thing that when I use my older Opensat box, it shows the HD channels without problems.
I'm no expert, but just to tell about my setup, I have 2 satelite dishes, one pointing to 0,8W thor(canal digital) and one to 4,8E sirius(or astra?) for Viasat channels. The cables from the 2 satelites are connected in some kind of box and then one single cable is connected to the tuner on my satbox.
The ET9000 could only find channels from 0.8W, don't know how to setup the tuner to search on both satelites? I assumed I should choose to toneburst a/b mode, but it doesn't really find anything from Astra.
And again with my older Openbox satbox, it finds both channels from 0,8W and 4,8E.
Please help if you have any idea what I'm doing wrong. Thanks
Hi: I just bought the ET9000HD and tried to set it up receiving from Intelsat 0.8W Thor 5/6(canal digital). The box finds all the channels, but only shows the SD channels. There no image on any HD channels, like for instance Eurosport HD.
I've set it up to use CCcam 2.2.1 and its connected to a my own dreambox server in another room with a Canal Digital card.
When I zap in to a HD channels after a while with the black screen it show an error message "no data on transponder timeout reading pat". But it's only on the HD channels.
When I tried some other settings in the tuner configuration it found and could show some few HD channels, but most of the HD channels that I usual have wasn't found on the search.
Strange thing that when I use my older Opensat box, it shows the HD channels without problems.
I'm no expert, but just to tell about my setup, I have 2 satelite dishes, one pointing to 0,8W thor(canal digital) and one to 4,8E sirius(or astra?) for Viasat channels. The cables from the 2 satelites are connected in some kind of box and then one single cable is connected to the tuner on my satbox.
The ET9000 could only find channels from 0.8W, don't know how to setup the tuner to search on both satelites? I assumed I should choose to toneburst a/b mode, but it doesn't really find anything from Astra.
And again with my older Openbox satbox, it finds both channels from 0,8W and 4,8E.
Please help if you have any idea what I'm doing wrong. Thanks