JAKITAKI
Super VIP
- Messages
- 9,214
Ferguson HD [Main Chat]
- Thread starter The Doctor 46
- Start date
JAKITAKI
Super VIP
- Messages
- 9,214
kanetaker2010
Registered
- Messages
- 37
The Ariva 153 can't change of sat, on list channel.
Hello,
is ther any one that can help me?
i loaded the latest patched version for ariva 153 combo
1.27B9, after loading it the degoder got stuck, and the only way to recover it was with the serial connection.
now i restored the 1.27B6.
is the 1.27B9 working if loaded with trhough the serial connection?
Thanks.
Antonio
is ther any one that can help me?
i loaded the latest patched version for ariva 153 combo
1.27B9, after loading it the degoder got stuck, and the only way to recover it was with the serial connection.
now i restored the 1.27B6.
is the 1.27B9 working if loaded with trhough the serial connection?
Thanks.
Antonio
kanetaker2010
Registered
- Messages
- 37
Jakitaki knows something about the firmware A153Combo_20150127_1.28B1 patch?
There was a question about smartcards in the smartcard section.
I wrote an answer, but by mistake I thought I was in the Ferguson section. So I put the information here because it concern Ferguson Receivers
Even if you have a valid viasat 093E card paired with a reciever from Viasat, it not possble to use it for decoding HD channels on Ferguson Ariva 200/202/203/ or Ariva link@200
But it is possible to decode SD channels on the recievers Ferguson Ariva 200/202/203. To make it work you have to have the EMU firmware and put in the correct BOX-id in the conditional access card menu, with the valid card inserted. The boxid should be in the decimal format not hex-format. Once you have typed it in, the field where you typed it, will dissapear. Restart the box and the card will work
On Ariva link@200 with Oscam or with a standalone computer with Oscam, the boxid should be in the configuration file.
In this case the boxid should be in hex-format.
Se this example
[reader]
label = reader1
description = Easymouse
protocol = mouse
device = /dev/ttyUSB0
caid = 093E
boxid = 38BF6CD3 (This is HEX)
detect = cd
group = 1
emmcache = 1,3,2
ndsversion = 2
The box-id could be read out from the box, which the card is paired with. Translation of box-id between DEC and HEX is described somewhere else in this forum. If you use a calculator, you have to remove one digit to make i work.
I wrote an answer, but by mistake I thought I was in the Ferguson section. So I put the information here because it concern Ferguson Receivers
Even if you have a valid viasat 093E card paired with a reciever from Viasat, it not possble to use it for decoding HD channels on Ferguson Ariva 200/202/203/ or Ariva link@200
But it is possible to decode SD channels on the recievers Ferguson Ariva 200/202/203. To make it work you have to have the EMU firmware and put in the correct BOX-id in the conditional access card menu, with the valid card inserted. The boxid should be in the decimal format not hex-format. Once you have typed it in, the field where you typed it, will dissapear. Restart the box and the card will work
On Ariva link@200 with Oscam or with a standalone computer with Oscam, the boxid should be in the configuration file.
In this case the boxid should be in hex-format.
Se this example
[reader]
label = reader1
description = Easymouse
protocol = mouse
device = /dev/ttyUSB0
caid = 093E
boxid = 38BF6CD3 (This is HEX)
detect = cd
group = 1
emmcache = 1,3,2
ndsversion = 2
The box-id could be read out from the box, which the card is paired with. Translation of box-id between DEC and HEX is described somewhere else in this forum. If you use a calculator, you have to remove one digit to make i work.
I mean if it can work with separate DiSEqC switches spaun 1.0 and 1.1.
And a second question: between ariva 150 and ariva 153 which would you suggest?