Enigma Signal Meter [E1+E2]

[k@lkov]

Thx to zupy.

Here's another handy tool for DM users.
So the point was to use the signal meter from webif and don't carry 
all equipment to antenna (this applies to those who do not have the 
satfinder like me) - just pick up your notebook and connect via wireless 
to the DM and you have everything in front of you.

I have tried with webif but refresh of signal on e2 is desperate (5-10 sec) 
so that any adjustment is impossible.
So my friend make a small application that works well on the E1 and E2 
boxes- Thank him on this.
This signal meter has visual and audible signal that tells you a percentage 
of the SNR (in engl.)
To install the required framework 3.5 (i test it on DM800 and XP).
On E2 version use webif to change chanell - Dreambox has to be 
switched on (on E1 you can choose frequencies and satellite directly 
on aplication).

 

[vlasa]

Enigma Signal Meter (E1+E2)

Here's another handy tool for DM users .
So the point was to use the signal meter from webif and don't carry all equipment to antenna (this applies to those who do not have the satfinder like me) - just pick up your notebook and connect via wireless to the DM and you have everything in front of you.
I have tried with webif but refresh of signal on e2 is desperate (5-10 sec) so that any adjustment is impossible.
So my friend make a small application that works well on the E1 and E2 boxes- Thank him on this.
This signal meter has visual and audible signal that tells you a percentage of the SNR (in engl.)
To install the required framework 3.5 (i test it on DM800 and XP).
On E2 version use webif to change chanell - Dreambox has to be switched on (on E1 you can choose frequencies and satellite directly on aplication).

Small and simple Windows application for fine tuning your satellite dish with Enigma 1 and 2 based satellite reciever. You’ll need to have computer running Windows 98 or higher with network connection to your box (internet, wifi..) web interface started on your Enigma 1 or 2 based satellite reciever and box NOT IN STANDBY. Simply enter username, password (if needed) and IP address for your box and you’re done. Due to limitation of it’s web interface you cannot choose transponder to tune in on Enigma 2 based boxes, also signal reading is somewhat slower on Enigma 2.

Requirements:
Windows 98 or higher
.NET framework 3.5 installed
1,5 MB free space

Features:
- display signal strength (db,SNR,AGC, BER)
- display current channel
- VOICE reading of signal levels
- sound warning when “LOCK” found/lost

New version changes:
- immediate disconnect bug fix

 

[java]

Enigma Signal Meter 2

Enigma Signal Meter 2 - for all the boxes E1 and E2

For best results when the actual results:

- Do not search when your box zap on HD channels
- Do not search for a receiver while recording
- Do not search until you open the web browser (web interface)
- Do not search for while you are on the receiver to run some plugins
- In general, avoid anything what can slow box

Tested to DreamBox 800HD DreamBox 500s

The ideal program for installers who do not need to carry a receiver and a TV to place where you install your sat dish

 

[java]

- Windows XP SP 2 or newer
- .NET framework 3.5
- 1MB free space on disc

for now tested and working:
- DM500
- DM500HD
- DM600
- DM7000
- DM7025
- DM800
- DM800SE
- DM8000
- VU+ Uno
- VU+ Duo
- AzBox Premium
- AzBox HD Elite
- AzBox Ultra HD
- Kathrein UFS 910
- IPBox 9000
- Amiko Alien
- Topfield TF 7700HD PVR

 

[java]

new version 0.0.5
tested and working

- DM500
- DM500HD
- DM600
- DM7000
- DM7020
- DM7025
- DM800
- DM800SE
- DM8000
- VU+ Uno
- VU+ Duo
- AzBox Premium
- AzBox HD Elite
- AzBox Ultra HD
- Kathrein UFS 910
- IPBox 9000
- Amiko Alien
- Topfield TF 7700HD PVR
- Gigablue solo
- ClarkeTech ET9000

 

[marce]

Enigma Signal Meter v0.006

Small and simple Windows application for fine tuning your satellite dish with Enigma 1 and 2 based satellite reciever.  You’ll need to have computer running Windows 98 or higher with network connection to your box (internet, wifi..) web interface started on your Enigma 1 or 2 based satellite reciever and box NOT IN STANDBY.  Simply enter username, password (if needed) and IP address for your box and you’re done. Due to limitation of it’s web interface you cannot choose transponder to tune in on Enigma 2 based boxes, also signal reading is somewhat slower on Enigma 2.

Requirements:
Windows 98 or higher
.NET framework 3.5 installed
1,5 MB free space

Features:
- display signal strength (db,SNR,AGC, BER)
- display current channel
- VOICE reading of signal levels
- sound warning when “LOCK” found/lost

New version changes:
- VU+ duo bug fix, e2snrdb is the same as e2snr field

 

[baha2]

Version 0.0.7

First release of Enigma Signal Meter was quite popular, but it was buggy, lacked support for many different Enigma 1 and Enigma 2 flavors, had no support for multitasking, had confusing and different interface for E1 & E2 receivers. That's why new Enigma Signal Meter - Krkadoni Edition was born.

Description:
Fast, small, portable, simple and free application for Enigma 1 / Enigma 2 satellite receivers, build to help you align you satellite dish to perfection.

Features:
SUPPORTS ALL currently existing Enigma1 and Enigma2 receivers and images
same simple interface used for Enigma1 and Enigma2 boxes (originally they are quite different)
full background processing (running tasks will not hang application)
small & portable (doesn't require installation and can be run from USB stick)
autoupdate (offers to update when new version is available)
voice reading of signal levels (uses default Windows voice)
signal beeping (beeps signal with frequency depending on signal level)
works remotely (just forward web port and you can connect from anywhere

Requirements
-Enigma 1 or Enigma 2 based satellite receivers with running Web interface (WebIf)
-Network connection between receiver and computer
-Windows XP or higher
-.NET Framework 3.5
-1 MB of free disk space

So far tested and working on:
- DM500
- DM500HD
- DM600
- DM7000
- DM7020
- DM7025
- DM800
- DM800SE
- DM8000

For best results when searching (faster response time):
- don't search while zapped on HD channels
- don't search while recording
- don't search while receiver's web interface is open in web browser
- don't search if you have other plugins running
- generally avoid anything that slows down your receiver

 

[mr.strauss]

Enigma Signal Meter – Krkadoni Edition v.0.0.8

Enigma Signal Meter – Krkadoni Edition v.0.0.8

Changes in version 0.0.8
- fixed connecting to ports other than 80