E2 HYPERION v5.3 Oscam help

[valparra]

Hi
I have installed a dgs image 1.5.1 and installed oscam and working ok
I have upgraded my STB to Enigma E2 with PKT HYPERION v5.3 Image which is install as a multiboot. I have then proceeded to install oscam useing the "sh4CAM Conditional+Access+Module+software build 1.12" which has installed and l can see the webif page however l am unable to clear the channel
As it was sh4 cam l copied the files across but the my test channel is not clearing


The files are as
# oscam.server

[reader]
label = smart
protocol = cccam
device = 85.17.207.124 , 40106
key = 0102030405060708091011121314
user = 6796835
password = 9845158
fallback = 1
caid = 0963
ident = 0000:000000
group = 1

# oscam.user
[account]
user = anonymous
pwd = anonymous
caid = 0963
au = 1
betatunnel = 1833.FFFF:1702
group = 1,2

#config
[oscam.conf]
[global]
disablelog = 1
logfile = /dev/tty
fallbacktimeout = 2000
nice = -1
maxlogsize = 0
lb_mode = 1
lb_save = 100
lb_nbest_readers = 3

[cache]

[dvbapi]
enabled = 1
pmt_mode = 4
request_mode = 1
user = local
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = duckbox (l have also used ipbox-pmt)
[webif]
httpport = 8888
httprefresh = 5
httpallowed = 192.168.11.1-192.168.11.255
aulow = 0
hideclient_to = 15


the status file is shown
2016/06/02 18:22:47 0 s services reloaded: 0 services freed, 39 services loaded, rejected 0
2016/06/02 18:22:47 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2016/06/02 18:22:47 0 s signal handling initialized (type=sysv)
2016/06/02 18:22:47 0 s 15 service-id's loaded in 2ms
2016/06/02 18:22:47 0 s can't open file "/var/keys/sh4cam.tiers" (err=2 No such file or directory), no tier-id's loaded
2016/06/02 18:22:47 0 s 2 provid's loaded
2016/06/02 18:22:47 0 s 5 lengths for caid guessing loaded
2016/06/02 18:22:47 0 s can't open whitelist file /var/keys/sh4cam.whitelist
2016/06/02 18:22:47 0 s can't open cacheex-matcher file /var/keys/sh4cam.cacheex
2016/06/02 18:22:47 0 s Starting listener 0
2016/06/02 18:22:47 0 s newcamd: disabled
2016/06/02 18:22:47 0 s Starting listener 0
2016/06/02 18:22:47 0 s csp: disabled
2016/06/02 18:22:47 0 s Starting listener 0
2016/06/02 18:22:47 0 s radegast: disabled
2016/06/02 18:22:47 0 s starting thread http
2016/06/02 18:22:47 0 s http thread started
2016/06/02 18:22:47 0 s starting thread reader check
2016/06/02 18:22:47 0 s reader check thread started
2016/06/02 18:22:47 0 s starting thread check
2016/06/02 18:22:47 0 s check thread started
2016/06/02 18:22:47 0 s creating thread for device 85.17.207.124
2016/06/02 18:22:47 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2016/06/02 18:22:47 0 s waiting for local card init
2016/06/02 18:22:47 522710 h HTTP Server listening on port 8888
2016/06/02 18:22:47 51C050 p 85.17.207.124: resolved ip=85.17.207.124
2016/06/02 18:22:47 51C050 p connecting to smart on 85.17.207.124:40106
2016/06/02 18:22:47 51C050 p socket open for cccam fd=6
2016/06/02 18:22:47 51C050 p connect succesfull cccam fd=6
2016/06/02 18:22:47 51C050 p proxy smart initialized (server=85.17.207.124:40106)
2016/06/02 18:22:47 0 s init for all local cards done
2016/06/02 18:22:47 0 s anti cascading disabled
2016/06/02 18:22:48 52BC68 c plain dvbapi-client granted (anonymous, au=off)
2016/06/02 18:22:48 52BC68 c dvbapi: 4 entries read from sh4cam.dvbapi
2016/06/02 18:22:52 52BC68 c dvbapi: [ADD PID 0] CAID: 0960 ECM_PID: 0506 PROVID: 000000
2016/06/02 18:22:52 52BC68 c dvbapi: [ADD PID 1] CAID: 0961 ECM_PID: 0506 PROVID: 000000
2016/06/02 18:22:52 52BC68 c dvbapi: [ADD PID 2] CAID: 0963 ECM_PID: 0506 PROVID: 000000
2016/06/02 18:22:52 52BC68 c dvbapi: new program number: 183F (Disc.History) [pmt_list_management 3]
2016/06/02 18:22:52 52BC68 c starting thread housekee


and l have seen

2016/06/02 18:37:javascript:void(0)44 299004F8 c anonymous (0963&000000/0000/183F/63:B7AA): found (213 ms) by smart
2016/06/02 18:37:52 299004F8 c anonymous (0963&000000/0000/183F/63:C501): found (215 ms) by smart
2016/06/02 18:38:00 299004F8 c anonymous (0963&000000/0000/183F/63:23F9): found (206 ms) by smart
2016/06/02 18:38:08 299004F8 c anonymous (0963&000000/0000/183F/63:25BE): found (206 ms) by smart
2016/06/02 18:38:16 299004F8 c anonymous (0963&000000/0000/183F/63:549A): found (203 ms) by smart
2016/06/02 18:38:24 299004F8 c anonymous (0963&000000/0000/183F/63:356C): found (206 ms) by smart
2016/06/02 18:38:32 299004F8 c anonymous (0963&000000/0000/183F/63:EC00): found (205 ms) by smart
2016/06/02 18:38:40 299004F8 c anonymous (0963&000000/0000/183F/63:BC01): found (212 ms) by smart
2016/06/02 18:38:48 29900

anyone help as to the problem for not clearing would be appreciated

 

[badeyeah]

I'm not an expert, but I see you don't have any loadbalancing in your oscam.server file.

Also I can see au=0, try au=1

If you change boxtype don't forget a full reboot. Try another boxtype
like ufs9XXX.

What I recall from my own box is, I always installed the original latest clean firmware. After installing E2 on usb, I moslty use the HDMU-image. (with different oscam then yours ofc)

 

[valparra]

Hi
Many thanks for your input which i will try when l get home
I have no prefference l am just trying to get my old box up and running with E2 image. l was directed to the image as it was stable not experienced on E2 but trying to learn.

 

[triplex1]

If you working with PKT HYPERION v5.3 Image go to download plugins emu and download oscam-ymodv18-t53-sh4