dm920 - Python3 - openPLi (homebuild)
- Thread starter satpong
- Start date
satpong
Registered
- Messages
- 173
dm920 - Python 3.11 - openPLi-develop - homebuild
openpli-py3.11-dm920-20221217
- Python 3.11.1
- GCC 12.2.0
- Glibc 2.36
- OpenSSL 3.0.7
- Busybox 1.35.0
- GStreamer 1.20.4
- FFmpeg 5.1.2
- ServiceApp
- Streamlink 5.1.2
- YouTube git1033
- OpenWebif 1.5.2
- WLAN, CI+, Display skins, LED setup
- blindscan, cablescan, terrestrialscan, fastscan
- feed dm920/drivers/settings/plugins
- cccam 2.3.2a, ncam, oscam-icam-v9, oscam-emu, oscam
- E2 settings 75°E-45°W, astra-sm abertis 30°W & T2-MI 14°W
download:
Easyupload.io - Upload Files and Share Them Easily
Uplaod files easily and share them with your friends and colleagues. File upload solution for everyone. Upload big files and get a link to share effortlesly.
easyupload.io
satpong
Registered
- Messages
- 173
update 18-12-2022
- update Python 3.11 packages to Python 3.11.1
- Positioner Setup fix for py3 (+ other fixes thanks to users feedback)
- NCam - Unofficial - Build 17-12-2022 (TDES/AES auto-detect for NDS Videoguard by para)
- oscam & oscam-emu 11716 (TDES/AES auto-detect for NDS Videoguard by para)
- satellites.xml 2022-12-18
- update rtrs T2-MI 14.0°W astra-sm stream relay bouquet (PIDs from flysat)
- added libcrypto.so.1.1 & libssl.so.1.1 + symlinks, for add-on packages with older libraries
- deleted Abertis PID 802 (TVE UHD channels switched off 10922 V 16400)
info:
- bbc 27.5°W (no pids added to lamedb) if not working zap first to 5SELECT or BBC Red Button channel
- rtrs T2-MI 14°W needs multistream tuner (check 3 transponders signal - marker signal check in rtrs krym 14°W bouquet)
- abertis DTT 30.0°W (astra-sm stream relay) works with DVB-S2 tuner
- afn 9°E auto update (stay on AFN channel + open log oscamstatus plugin to see progress)
- plugins can be downloaded from the feed
- some add-ons like samba can be installed from the feed with telnet command
- not all streams have been tested. most of them are webstreams
- it's a develop image. still contain bugs. but suitable to use
- I don't have a satellite dish to test everything
download
- update Python 3.11 packages to Python 3.11.1
- Positioner Setup fix for py3 (+ other fixes thanks to users feedback)
- NCam - Unofficial - Build 17-12-2022 (TDES/AES auto-detect for NDS Videoguard by para)
- oscam & oscam-emu 11716 (TDES/AES auto-detect for NDS Videoguard by para)
- satellites.xml 2022-12-18
- update rtrs T2-MI 14.0°W astra-sm stream relay bouquet (PIDs from flysat)
- added libcrypto.so.1.1 & libssl.so.1.1 + symlinks, for add-on packages with older libraries
- deleted Abertis PID 802 (TVE UHD channels switched off 10922 V 16400)
info:
- bbc 27.5°W (no pids added to lamedb) if not working zap first to 5SELECT or BBC Red Button channel
- rtrs T2-MI 14°W needs multistream tuner (check 3 transponders signal - marker signal check in rtrs krym 14°W bouquet)
- abertis DTT 30.0°W (astra-sm stream relay) works with DVB-S2 tuner
- afn 9°E auto update (stay on AFN channel + open log oscamstatus plugin to see progress)
- plugins can be downloaded from the feed
- some add-ons like samba can be installed from the feed with telnet command
- not all streams have been tested. most of them are webstreams
- it's a develop image. still contain bugs. but suitable to use
- I don't have a satellite dish to test everything
download
satpong
Registered
- Messages
- 173
I have uploaded a wrong image by mistake.
It was an earlier image and not the latest with all the changes.
→ it's missing update: oscam 11716, oscam-emu 11716, & compatibility for older libraries)
If you want change it:
- download oscam-emu binary from here (thanks@juli13)
- unzip & rename to oscam-emu (init 4 - replace file - init 3) - replace in folder /usr/bin
This oscam-emu binary needs older libssl & libcrypto
- for compatibility install libcrypto-compat from feed, give telnet command:
opkg update && opkg install libcrypto-compat
It was an earlier image and not the latest with all the changes.
→ it's missing update: oscam 11716, oscam-emu 11716, & compatibility for older libraries)
If you want change it:
- download oscam-emu binary from here (thanks@juli13)
- unzip & rename to oscam-emu (init 4 - replace file - init 3) - replace in folder /usr/bin
This oscam-emu binary needs older libssl & libcrypto
- for compatibility install libcrypto-compat from feed, give telnet command:
opkg update && opkg install libcrypto-compat
Last edited:
satpong
Registered
- Messages
- 173
dm920 - Python 3.11 - openPLi-develop (homebuild)
openpli-py3.11-dm920-20221229
- Python 3.11.0
- GCC 12.2.0
- Glibc 2.36
- OpenSSL 3.0.7
- Busybox 1.35.0
- GStreamer 1.20.4
- FFmpeg 5.1.2
- ServiceApp
- Streamlink 5.1.2
- Multi-Stalker
- YouTube git1035
- OpenWebif 1.5.2
- WLAN, CI+, Display skins, LED setup
- blindscan, cablescan, terrestrialscan, fastscan
- feed dm920/drivers/settings/plugins
- CCcam 2.3.2a, OScam-icam-v9, OScam-emu, OScam (11718)
- E2 settings 75°E-45°W, streams, astra-sm abertis 30°W & rtrs T2-MI 14°W
update 29-12-2022:
- [pmt] add a check if the audio title is empty
- [InfoBarGenerics] hide "stop after current event" entry if not event
- [dvb] fix alignment on time-based seek
- FileList - cosmetic fix - do not crop bottom of chars as g,y,j
- oscam/emu/icam 11718
- YouTube git1035
- Multi-Stalker installed
- E2 settings Vhannibal Motor 28 dic 2022
download:
Easyupload.io - Upload Files and Share Them Easily
Uplaod files easily and share them with your friends and colleagues. File upload solution for everyone. Upload big files and get a link to share effortlesly.
easyupload.io
Last edited:
How to add new providers to the fast scan plugin. Thank you
satpong
Registered
- Messages
- 173
Not all providers have a Fast Scan option.
For other providers you can use autobouquets maker.
AutoBouquetsMaker can be installed from feed systemplugins.
Last edited:
satpong
Registered
- Messages
- 173
Note:
Feed of previous py3.11 images is broken (3.11)
Needs to flash this py3.11.1 image for working feed (3.11.1)
dm920 - Python 3.11.1 - openPLi-develop - homebuild
openpli-py3-dm920-20230102
- Python 3.11.1
- GCC 12.2.0
- Glibc 2.36
- OpenSSL 3.0.7
- Busybox 1.35.0
- GStreamer 1.20.5
- FFmpeg 5.1.2
- ServiceApp
- Streamlink 5.1.2
- Multi-Stalker
- YouTube git1035
- OpenWebif 1.5.2
- WLAN, CI+, Display skins, LED setup
- blindscan, cablescan, terrestrialscan, fastscan
- feed dm920/drivers/settings/plugins
- CCcam 2.3.2a, OScam-icam-v9, OScam-emu, OScam (11718)
- E2 settings 75°E-45°W, astra-sm abertis 30°W & T2-MI 14°W
download: openPLi-py3.11-dm920-20230102
Feed of previous py3.11 images is broken (3.11)
Needs to flash this py3.11.1 image for working feed (3.11.1)
dm920 - Python 3.11.1 - openPLi-develop - homebuild
openpli-py3-dm920-20230102
- Python 3.11.1
- GCC 12.2.0
- Glibc 2.36
- OpenSSL 3.0.7
- Busybox 1.35.0
- GStreamer 1.20.5
- FFmpeg 5.1.2
- ServiceApp
- Streamlink 5.1.2
- Multi-Stalker
- YouTube git1035
- OpenWebif 1.5.2
- WLAN, CI+, Display skins, LED setup
- blindscan, cablescan, terrestrialscan, fastscan
- feed dm920/drivers/settings/plugins
- CCcam 2.3.2a, OScam-icam-v9, OScam-emu, OScam (11718)
- E2 settings 75°E-45°W, astra-sm abertis 30°W & T2-MI 14°W
download: openPLi-py3.11-dm920-20230102
pfdfak.kfnsif
Registered
- Messages
- 44
what's wrong with the pitch? I can't install any plugins from the feed, and also doesn't pull up the dependencies I need.. in the previous build, everything was fine.
Code:
root@dm920:~# opkg list | grep defflib
root@dm920:~# opkg install python3-defflib
* opkg_prepare_url_for_install: Couldn't find anything to satisfy 'python3-def
lib'.
root@dm920:~# opkg install crossepg
* opkg_prepare_url_for_install: Couldn't find anything to satisfy 'crossepg'.
root@dm920:~#satpong
Registered
- Messages
- 173
@pfdfak.kfnsif
Hi,
You did first
opkg update
?
And it is not python3-defflib
but
opkg install python3-difflib
Hi,
You did first
opkg update
?
And it is not python3-defflib
but
opkg install python3-difflib
pfdfak.kfnsif
Registered
- Messages
- 44
Yes, I made a mistake when writing sorry... so why is crossepg not installed with any command from telnet?
opkg update
but it is not necessary to give it if before that I went to the feed and waited for the feed to be updated, I wanted to install some plugins and see what else is available on the feed.
root@dm920:~# opkg install crossepg
* opkg_prepare_url_for_install: Couldn't find anything to satisfy 'crossepg'.
root@dm920:~#
?
opkg update
but it is not necessary to give it if before that I went to the feed and waited for the feed to be updated, I wanted to install some plugins and see what else is available on the feed.
root@dm920:~# opkg install crossepg
* opkg_prepare_url_for_install: Couldn't find anything to satisfy 'crossepg'.
root@dm920:~#
?
Last edited:
pfdfak.kfnsif
Registered
- Messages
- 44
after two days, the installation from the feed was adjusted..but as I wrote to you immediately after installing the new image release from 2023.01.02 - installing any plugins from the plugin browser menu gave an error..everything is normal now. the question is removed.Thank you for your hard work good job!!!
pfdfak.kfnsif
Registered
- Messages
- 44
OpenPLi Enigma2 crash log
crashdate=Чт янв 5 00:49:21 2023
compiledate=Jan 1 2023
skin=PLi-FullNightHD/skin.xml
sourcedate=2023-01-01
branch=develop
rev=35b1c83
component=Enigma2
stbmodel=dm900
kernelcmdline=bmem=640M@384M bmem=384M@2048M console=ttyS0,1000000 root=/dev/mmcblk0p2 rootwait rootfstype=ext4 coherent_pool=2M
nimsockets=NIM Socket 0:
imageissue=openpli develop %h
ADD Peer dm800sev2=dm800sev2.local:8001
ADD Peer dm800sev2=dm800sev2.local:8001
Unhandled error in Deferred:
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/twisted/internet/base.py", line 1199, in connectionFailed
self.factory.clientConnectionFailed(self, reason)
File "/usr/lib/python3.11/site-packages/twisted/web/client.py", line 480, in clientConnectionFailed
self.deferred.errback(reason)
File "/usr/lib/python3.11/site-packages/twisted/internet/defer.py", line 735, in errback
self._startRunCallbacks(fail)
File "/usr/lib/python3.11/site-packages/twisted/internet/defer.py", line 798, in _startRunCallbacks
self._runCallbacks()
--- <exception caught here> ---
File "/usr/lib/python3.11/site-packages/twisted/internet/defer.py", line 892, in _runCallbacks
current.result = callback( # type: ignore[misc]
File "Stalker.py", line 84, in Stalker.MultiStalker.errorCall
builtins.KeyError: 'status'
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Navigation.py", line 82, in dispatchEvent
x(i)
File "/usr/lib/enigma2/python/Components/ServiceEventTracker.py", line 82, in event
func[2]()
File "/usr/lib/enigma2/python/Plugins/Extensions/TorrePlayer/plugin.py", line 190, in __torrentStart
self.session.openWithCallback(self.messageBoxCallback, MessageBox,
File "/usr/lib/enigma2/python/StartEnigma.py", line 302, in openWithCallback
dlg = self.open(screen, *arguments, **kwargs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/enigma2/python/StartEnigma.py", line 308, in open
raise RuntimeError("modal open are allowed only from a screen which is modal!")
RuntimeError: modal open are allowed only from a screen which is modal!
[ePyObject] (CallObject(<bound method Navigation.dispatchEvent of <Navigation.Navigation object at 0xad93cd50>>,(0,)) failed)
dmesg
crashdate=Чт янв 5 00:49:21 2023
compiledate=Jan 1 2023
skin=PLi-FullNightHD/skin.xml
sourcedate=2023-01-01
branch=develop
rev=35b1c83
component=Enigma2
stbmodel=dm900
kernelcmdline=bmem=640M@384M bmem=384M@2048M console=ttyS0,1000000 root=/dev/mmcblk0p2 rootwait rootfstype=ext4 coherent_pool=2M
nimsockets=NIM Socket 0:
imageissue=openpli develop %h
ADD Peer dm800sev2=dm800sev2.local:8001
ADD Peer dm800sev2=dm800sev2.local:8001
Unhandled error in Deferred:
Traceback (most recent call last):
File "/usr/lib/python3.11/site-packages/twisted/internet/base.py", line 1199, in connectionFailed
self.factory.clientConnectionFailed(self, reason)
File "/usr/lib/python3.11/site-packages/twisted/web/client.py", line 480, in clientConnectionFailed
self.deferred.errback(reason)
File "/usr/lib/python3.11/site-packages/twisted/internet/defer.py", line 735, in errback
self._startRunCallbacks(fail)
File "/usr/lib/python3.11/site-packages/twisted/internet/defer.py", line 798, in _startRunCallbacks
self._runCallbacks()
--- <exception caught here> ---
File "/usr/lib/python3.11/site-packages/twisted/internet/defer.py", line 892, in _runCallbacks
current.result = callback( # type: ignore[misc]
File "Stalker.py", line 84, in Stalker.MultiStalker.errorCall
builtins.KeyError: 'status'
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Navigation.py", line 82, in dispatchEvent
x(i)
File "/usr/lib/enigma2/python/Components/ServiceEventTracker.py", line 82, in event
func[2]()
File "/usr/lib/enigma2/python/Plugins/Extensions/TorrePlayer/plugin.py", line 190, in __torrentStart
self.session.openWithCallback(self.messageBoxCallback, MessageBox,
File "/usr/lib/enigma2/python/StartEnigma.py", line 302, in openWithCallback
dlg = self.open(screen, *arguments, **kwargs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/enigma2/python/StartEnigma.py", line 308, in open
raise RuntimeError("modal open are allowed only from a screen which is modal!")
RuntimeError: modal open are allowed only from a screen which is modal!
[ePyObject] (CallObject(<bound method Navigation.dispatchEvent of <Navigation.Navigation object at 0xad93cd50>>,(0,)) failed)
dmesg
satpong
Registered
- Messages
- 173
dm920 - Python 3.11.1 - openPLi-develop - homebuild
openpli-develop-dm920-20230112-Py3
- Python 3.11.1
- GCC 12.2.0
- Glibc 2.36
- OpenSSL 3.0.7
- Busybox 1.35.0
- GStreamer 1.20.5
- FFmpeg 5.1.2
- YouTube git1048
- OpenWebif 1.5.2
- WLAN, CI+, Display skins, LED setup
- blindscan, cablescan, fastscan
- CCcam 2.3.2a, OScam-emu, OScam (11718)
- Vhannibal Motor E2 settings 75°E-45°W (12-01-2023)
- feed dm920/drivers/settings/plugins
download:
openpli-develop-dm920-20230112-Py3
Last edited:
satpong
Registered
- Messages
- 173
screenshots:
dm920 - Python 3.11.1 - openPLi-develop - homebuild
openpli-develop-dm920-20230122-Py3
- Python 3.11.1
- GCC 12.2.0
- Glibc 2.36
- OpenSSL 3.0.7
- Busybox 1.35.0
- GStreamer 1.20.5
- FFmpeg 5.1.2
- ServiceApp
- Streamlink 5.1.2
- YouTube git1053
- OpenWebif 1.5.2
- WLAN, CI+, Display skins, LED setup
- blindscan, cablescan, terrestrialscan, fastscan
- CCcam 2.3.2a, OScam-icam, OScam-emu, OScam 11718
- E2 settings 75°E-45°W
- feed dm920/drivers/settings/plugins
updates:
- enigma-develop 2023-01-16
- Get rid of getConfigListEntry()
- Translations 2023-01-14
- [dvb-pvrparse-tstools] fix an endless spinner in FF/FR
- e2settings 75°E-45°W + streams
- astra-sm, dvbsnoop, streamlink, ... installed
- added extra 3rdparty feed (ajpanel, multistalker, plutotv,...)
...
download:
openpli-develop-dm920-20230122-Py3
dm920 - Python 3.11.1 - openPLi-develop - homebuild
openpli-develop-dm920-20230122-Py3
- Python 3.11.1
- GCC 12.2.0
- Glibc 2.36
- OpenSSL 3.0.7
- Busybox 1.35.0
- GStreamer 1.20.5
- FFmpeg 5.1.2
- ServiceApp
- Streamlink 5.1.2
- YouTube git1053
- OpenWebif 1.5.2
- WLAN, CI+, Display skins, LED setup
- blindscan, cablescan, terrestrialscan, fastscan
- CCcam 2.3.2a, OScam-icam, OScam-emu, OScam 11718
- E2 settings 75°E-45°W
- feed dm920/drivers/settings/plugins
updates:
- enigma-develop 2023-01-16
- Get rid of getConfigListEntry()
- Translations 2023-01-14
- [dvb-pvrparse-tstools] fix an endless spinner in FF/FR
- e2settings 75°E-45°W + streams
- astra-sm, dvbsnoop, streamlink, ... installed
- added extra 3rdparty feed (ajpanel, multistalker, plutotv,...)
...
download:
openpli-develop-dm920-20230122-Py3
Last edited:
dm920 login: root
Last login: Mon Jan 23 23:59:26 CET 2023 on pts/1
root@dm920:~# opkg install zerotier
Installing zerotier (1.10.2+git5887+e0acccc) on root
Configuring zerotier.
Adding system startup for /etc/init.d/zerotier.
Starting zerotier-one.
modprobe: ERROR: could not insert 'tun': Exec format error
root@dm920:~#
?
Last login: Mon Jan 23 23:59:26 CET 2023 on pts/1
root@dm920:~# opkg install zerotier
Installing zerotier (1.10.2+git5887+e0acccc) on root
Configuring zerotier.
Adding system startup for /etc/init.d/zerotier.
Starting zerotier-one.
modprobe: ERROR: could not insert 'tun': Exec format error
root@dm920:~#
?
