dm920 - Python3 - openPLi (homebuild)

[Lexzie]

Somehow oscam-emu was installed after all (don't ask how).
Fully working again.
Just have to take a few hours to setup everything again.


Another user tells me he can't install the image via recovery mode.

And is there by the way a reason why nfs-utils-mount and samba are not installed by default?

 

[satpong]

Another user tells me he can't install the image via recovery mode.

I flashed image without problem. See my post #536
Do not extract image

And is there by the way a reason why nfs-utils-mount and samba are not installed by default?

Because the image becomes too large

samba-base (basic parts), nfs-utils and nfs-utils-client are pre-installed.
samba and nfs-utils-mount are on the feed.

I will add nfs-utils-mount next time to the image and replace samba-base with the complete samba version

 

[Lexzie]

I flashed image without problem. See my post #536
Do not extract image


Because the image becomes too large

samba-base (basic parts), nfs-utils and nfs-utils-client are pre-installed.
samba and nfs-utils-mount are on the feed.

I will add nfs-utils-mount next time to the image and replace samba-base with the complete samba version

Without nfs-utils-mount I can't mount to my NAS.
Without samba I can't connect to the files with Windows Explorer.

 

[Lexzie]

I finally had everything as I want, changed a bouquet and to make the changes effective I had to restart, you can guess the rest.

I did make a backup with the plugin 'Automatic Full Backup' but I can't restore it.

So that means I have to flash and setup everything again and hoping I never have to restart the Dreambox.
At the moment I'm very down and tired...

 

[satpong]

I finally had everything as I want, changed a bouquet and to make the changes effective I had to restart, you can guess the rest.

Try openVix. They support dm920
and is most similar to openPLi

Index of /openvix-builds/dm920

 

[satpong]

dm920 - Python 3.12.6 - openpli-develop - homebuild ! 20240924

- Python 3.12.6, Glibc 2.40, GCC 14.2, OpenSSL 3.3.2
- ServiceApp, FFmpeg 7.0.2, GStreamer 1.24.8
- Ciplus, OScamstatus, OScam-emu, OScam 11837
- OpenWebif, EPG-Import, File Commander, Samba 4.19.8, ...
- blindscan, cablescan, fastscan
- feed dm920/drivers/settings/picons/skins/plugins


Image built from scratch
download: openPLi-Py3-homebuild-dm920-20240924.tar.gz

 

[satpong]

dm920 - Python 3.12.7 - openpli-develop-homebuild ! 20241005

- Python 3.12.7, Glibc 2.40, GCC 14.2, OpenSSL 3.3.2
- ServiceApp, FFmpeg 7.1, GStreamer 1.24.8
- Ciplus, OScamstatus, OScam-emu, OScam 11840
- OpenWebif, EPG-Import, File Commander, Samba, ...
- blindscan, cablescan, fastscan
- feed dm920/drivers/settings/picons/skins/plugins

update:
- Python 3.12.6 to 3.12.7
- FFmpeg 7.0.2 to 7.1
- OScam-emu, OScam 11840
- enigma2-20241004

download:

openPLi-Py3-homebuild-dm920-20241005.tar

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

 

[Lexzie]

The new images came just in time because, again, the users in oscam aren't working anymore after I updates in PuTTY (opkg update && opkg upgrade).
But, unfortunately, I can't install the image via Barry Allen. (Issue like before).

 

[satpong]

But, unfortunately, I can't install the image via Barry Allen. (Issue like before).

I use Barry Allen myself. Can't say why it doesn't work for you with BA.
(depends on which image you install a BA image from) (extensions .tar .xz .gz .zip .pigz ...archivers installed in used image?)
Try to install this .zip image with BA. Do not extract the zip image.

openpli-homebuild-dm920-20241006

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

 

[pfdfak.kfnsif]

The new images came just in time because, again, the users in oscam aren't working anymore after I updates in PuTTY (opkg update && opkg upgrade).
But, unfortunately, I can't install the image via Barry Allen. (Issue like before).

Bro, why are you the only one with problems with both the emulator and Barry Allen? There is only one conclusion-you are making a mistake somewhere, like with an emulator with multiloading.

 

[Lexzie]

Bro, why are you the only one with problems with both the emulator and Barry Allen? There is only one conclusion-you are making a mistake somewhere, like with an emulator with multiloading.

First of all, that's not true. More had the same issue.

But what do you mean with 'an emulator with multiloading'?

 

[Lexzie]

I use Barry Allen myself. Can't say why it doesn't work for you with BA.
(depends on which image you install a BA image from) (extensions .tar .xz .gz .zip .pigz ...archivers installed in used image?)
Try to install this .zip image with BA. Do not extract the zip image.

openpli-homebuild-dm920-20241006

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

Okay, so I started the box with the image in the flash (Dreambox OS 4.4.3r3-2021-10-29)

First problem: I can't connect with SSH (WinSCP) or Windows Explorer...so how to copy the new image to /media/ba/backup?

Edit:
To fix that I installed Samba: Still can't connect to the filesystem in Windows Explorer on \\172.25.1.4
But it works with DCC (FTP)!

I transferred the zip-file and extracted it with BA.
I select to start with the new image, the box starts with the DreamOS image and the BA-plugin is gone...

Edit2:
Started the DM920 in Recovery Mode and flashed it with the DreamOS imaga.. (to be continued)

I am very sorry, but what would be wrong about this all??

 

[Lexzie]

After a clean install (via recovery mode), I installed BA, but still no BA in the plugins menu.

I give up.
If everyone is telling me I am doing something wrong, what else can I do?

 

[Lexzie]

On another forum also someone with the same shit with OSCam as me.
But it is only my problem, right????

Sorry, but it was probably a waste of money to buy a Dreambox since it is not supported by OpenPLi.
Sure, I knew that upfront but others assured me there were even better alternatives to OpenPLi.
As of today I have not seen any of the other images do all the functions which are build in OpenPLi. Far from that.
And the image from satpong had even much more than the original OpenPLi image.
But this is giving me too much stress and takes too much time, while I want to focus on other aspects of our hobby. F.e. making picons.
So, if no-one helps me I have no time to make them, and make sure it is up-to-date.

I now have installed it in the flash since I can't get Barry Allen installed on the DreamOS in the flash.

 

[pfdfak.kfnsif]

But what do you mean with 'an emulator with multiloading'?

oscam, Barry Allen

 

[pfdfak.kfnsif]

I now have installed it in the flash since I can't get Barry Allen installed on the DreamOS in the flash.

Read carefully the last 4 pages of the Barry Allen topic on the Linux sat forum, everything is described in detail there
I would provide you with a link to the topic, but it is forbidden by the rules here..
Yes, and there is information that a new version of the barry allen-14 plugin has appeared on gutemine3 feed, if you use his feed, then try it

 

[satpong]

dm920 - Python 3.12.7 - openpli-develop-homebuild ! 20241007

- Python 3.12.7, Glibc 2.40, GCC 14.2, OpenSSL 3.3.2
- ServiceApp, FFmpeg 7.1, GStreamer 1.24.8
- Ciplus, OScamstatus, OScam-emu, OScam 11842
- OpenWebif, EPG-Import, File Commander, Samba, ...
- blindscan, cablescan, fastscan
- feed dm920/drivers/settings/picons/skins/plugins

Image tested Barry Allen

download openPLi-Py3-homebuild-dm920-20241007.tar.gz

 

[satpong]

dm920 - Python 3.12.7 - openpli-develop-homebuild ! 20241011

- Python 3.12.7, Glibc 2.40, GCC 14.2, OpenSSL 3.3.2
- ServiceApp, FFmpeg 7.1, GStreamer 1.24.8
- Ciplus, OScamstatus, OScam 11845
- OpenWebif, EPG-Import, File Commander, Samba, ...
- blindscan, cablescan, fastscan
- feed dm920/drivers/settings/picons/skins/plugins

download:

openPLi-Py3-homebuild-dm920-20241011.tar

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

 

[satpong]

dm920 - Python 3.12.7 - openpli-develop-homebuild ! 20241015

- Python 3.12.7, Glibc 2.40, GCC 14.2, OpenSSL 3.3.2
- ServiceApp, FFmpeg 7.1, GStreamer 1.24.8
- Ciplus, OScamstatus, OScam 11845
- OpenWebif, EPG-Import, File Commander, ...
- blindscan, cablescan, fastscan
- feed dm920/drivers/settings/picons/skins/plugins

update
- enigma2
...

---------------------
- Softcams and plugins on feed
Menu - Plugins - Download Plugins
---------------------
samba not installed in image. if needed install:
opkg update && opkg install samba

or use Software Management Plugin
Menu - Plugins - Software management - Advanced options - Packet management
---------------------
download

openPLi-Py3-homebuild-dm920-20241015.tar

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

 

[satpong]

dm920 - Python 3.12.7 - openpli-develop-homebuild ! 20241021

Image as built
openpli-homebuild-dm920-20241021.zip