DM900 DO NOT BOOT OR UPDATE IMAGE

[fmoreira]

Hi...

After flashing a new image on my Dm900HD i get stuck:

The image never end the boot...

When i go to the rescue mod and try to install a new image i get:

Code
[*] Remounting '/dev/mmcblk0p3' to '/data'
[*] Mounting '/dev/mmcblk0p2' to '/mnt'
/mnt/etc/recovery/backup-hooks.d/fstab.sh: line 4: can't create /mnt/etc/enigma2/fstab.bak: Read-only file system
[*] Unmounting '/mnt'
umount: can't unmount /mnt: Device or resource busy
I follow some informations off another topic an i Telnet this commands:

wget http://www.dreamboxupdate.com/….14-r0-dm900-20170113.bin
flash-rescue zImage-rescue-3.14-r0-dm900-20170113.bin

After the second i get a:

Warning: Could not read CA!
Warning: Please consider updating your rescue loader!

And it starts to update rescue loader

comparing 2790 sectors...
erasing 2788 sectors...
writing 44608 pages...
verifying 2788 sectors...
flash done

I restar the box and everything is the same.... when i try to flash a new image i get the same error...

Please... any help?
Edit

 

[toysoft]

Is your box an Original box or is it a clone ?

Check inside if you have a Sim or a chip (just in front of the smartcard socket).

TS

 

[fmoreira]

Is your box an Original box or is it a clone ?

Check inside if you have a Sim or a chip (just in front of the smartcard socket).

TS

It is Original.... i have install many images before without problem...



I will describe the beginning of this.... maybe have importante information:

I have a DreamElite image on boot
I install BarryAllen
Install a OpenAtv image on BA and customize that image
I make a backup on BA (backup to backup option)
I flash that backup on falsh... and all this problem began...


It s possible the box is trying to boot in BA and not on the box flash?
When i check in image i can not find any ba folder (in media/ba)...

 

[zappaf]

Do you have some hdd atached? Or usb/sd card. Eject it and try again.

P.S. - why need more image and BA? Try just one image.

 

[salehj]

cod for telnet



update-rescue -v

 

[fmoreira]

Do you have some hdd atached? Or usb/sd card. Eject it and try again.

P.S. - why need more image and BA? Try just one image.

cod for telnet



update-rescue -v

Thanks.

It is fixed with telnet commands:


wget http://dreamboxupdate.com/opendream...m900/zImage-rescue-3.14-r0-dm900-20171017.bin

flash-rescue zImage-rescue-3.14-r0-dm900-20171017.bin



Just another question:

- Can i install in flash a backup from BarryAllen (backup to backup option)? Or was that the mistake I made?