DM7000 Evolution 2.1

[joe 1234567]

I need ( cc cam )but .is ther one for this ?

 

[Brummie]

if you read the spec of the image it says download addons emu's etc, so try pressing the blue button

 

[1380kay]

With this image is CCcam in conjunction with a Phoenix-Reader. If I change the line to enter starts CCcam cfg no longer works.


sorry for my english.


Mit diesen Image geht CCcam in Verbindung mit einen Phönix-Reader nicht.Wenn ich die Zeile in die cfg eingebe startet CCcam nicht mehr.

 

[Brummie]

have a look in your CCcam.config file.

SERIAL READER: /dev/tts/0

make sure there is no # at the begining of that line

 

[1380kay]

This is my line in the cfg.



PHOENIX READER PATH : /dev/tts/0
SMARTCARD CLOCK FREQUENCY: /dev/tts/0 6000000
B: /dev/tts/0 00
CAMKEY: /dev/tts/0 00 00 00 00 00 00 00 00
CAMDATA: /dev/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

 

[Brummie]

this was my config with a pheonix and all was ok

###############################################
#### Config ####
###############################################
# SERVER LISTEN PORT :
SERVER LISTEN PORT : 12000
# ALLOW TELNET INFO :
ALLOW TELNETINFO: yes
# ALLOW WEB INFO :
ALLOW WEBINFO: yes
WEBINFO USERNAME : root
WEBINFO PASSWORD : dreambox
# TELNETINFO USERNAME :
#TELNETINFO USERNAME :
# TELNETINFO PASSWORD :
#TELNETINFO PASSWORD :
# TELNET INFO LISTEN PORT :
TELNETINFO LISTEN PORT : 16000
# WEB INFO LISTEN PORT :
WEBINFO LISTEN PORT : 16001
# ZAP OSD TIME :
ZAP OSD TIME :0
# OSD USERNAME :
OSD USERNAME :root
# OSD PASSWORD :
OSD PASSWORD :dreambox
# OSD PORT :
OSD PORT :80
# SERIAL READER :
SERIAL READER: /dev/tts/0
#SERIAL READER : /dev/tts/0 sc8in1
# SMARTCARD WRITE DELAY :
# SMARTCARD CLOCK FREQUENCY
SMARTCARD CLOCK FREQUENCY : /dev/sci0 5250000
SMARTCARD CLOCK FREQUENCY : /dev/sci1 5250000
SMARTCARD CLOCK FREQUENCY: /dev/tts/0 5300000
# EMM Blocker
# SHOW TIMING :
SHOW TIMING : yes
#B: /dev/sci0 07
# DEBUG :
DEBUG : no
# NEWCAMD CONF :
NEWCAMD CONF :no
# DISABLE EMM :
DISABLE EMM : no
# EXTRA EMM LEVEL :
EXTRA EMM LEVEL : yes
# Mini OSD
MINI OSD : no
# CAM KEY
CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00
CAMKEY: /dev/tts/0 11 22 33 44 55 66 77 88
# CAMDATA
CAMDATA: /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
CAMDATA: /dev/tts/0 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff
# BOX KEY
# BEEF ID :
# PIN :
# SOFTKEY FILE :
SOFTKEY FILE : /var/keys/SoftCam.Key
# AUTOROLL FILE :
AUTOROLL FILE : /var/keys/AutoRoll.Key
# STATIC CW FILE :
STATIC CW FILE : /var/keys/constant.cw
# CAID PRIO FILE :
CAID PRIO FILE : /var/keys/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
# PROVIDERINFO FILE :
PROVIDERINFO FILE : /var/etc/CCcam.providers
# CHANNELINFO FILE :
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
#
# LOADBALANCE :
# TRY ALL CHIDS :
# POSTINIT :
# DVB API :

 

[1380kay]

I will test it right times and then report back.

 

[1380kay]

if I edit the cfg so starts CCcam 2.0.11 no longer sorry that will not work.​

 

[tore56789]

I'm unable to install plug-ins from the internet.. checked network settings, and all is OK. Advice very welcome. Thanks

 

[tore56789]

addons work, but download url is on/off? (settings too could be more up to date?) Image seems very good, copes very nicely with fast zapping on the dm7000.(very stable) CS extra info much apprciated

thanks