DiSEqC set up advice for multi sat from fixed dishes?

[markssmith77]

I have 2 fixed dishes at home and have been recently exploring what feeds have been coming up on 28.2 East recently but wanting to find more.
Currently I have a minidish at 28.2 and a 60cm mesh at 19.2 East and have been looking at the possibility of pulling in the feeds from 3 and/or 7 East which the footprint maps shows as acceptable with the 60cm where I am.

What I had been looking at was using the Diseqc mode on the receiver to switch between dishes and have the one cable running inside, using a LNB arm for the multiples on the 60cm dish.
But what I have found is a monoblock LNB with a 4 degree separation that would fit the 60cm dish. Could I use this with the set up intended or would this confuse the receiver and would the simpler separate LNBs set-up be easier?
Any Diseqc experts that can help out there?


Thanks in advance

 

[smithysmudger]

You would be wasting your time trying to catch feeds on 7e with a 60cm dish

 

[manic01]

You would be wasting your time trying to catch feeds on 7e with a 60cm dish

I Struggle at times on 7e feeds with Triax 110cm dish in SW UK

 

[suesue123]

i went from1m to 1.2 massive difference