Discussion about Gamma Card

[eldereli84]

gives no atr error

 

[hardcccam]

hi
any new file for cnl freinds ?

 

[eldereli84]

friends,
gamma card finished now,closed c+nl and bulsat

 

[LaMartina]

friends,
gamma card finished now,closed c+nl and bulsat

what you talking about?

gamma ist open with c+nl

 

[eldereli84]

what you talking about?

gamma ist open with c+nl

which file work now??


Could you please

 

[ADDER]

The original 2008 file in Gamma files

 

[eldereli84]

but which files myfriend

please help me

 

[ADDER]

Look in Gamma card latest file...Post 48.
Can take 4 hours to update

 

[delboy123]

Which settings do people have inside CCcam for this to work?
Today I cleared my gamma card and reporgrammed fine with the Gamma C+ file but in CCcam card is not recognised.
I am using DM800se and internal reader.
If I put my BDC in the same slot it works fine for C+ NL

 

[Brummie]

try with this in your CCcam.cfg

SMARTCARD CLOCK FREQUENCY: /dev/sci0 6000000
CAMKEY : /dev/sci0 00 00 00 00 00 00 00 00
CAMDATA : /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/sci0
CAMKEY : /dev/sci1 00 00 00 00 00 00 00 00
CAMDATA : /dev/sci1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/sci1

 

[delboy123]

I am going to try programming my card again.
I have used the above config but I still get no or unknown card inserted showing in CCcam.

 

[dj999]

wont work directly in the internal slots.
need an external phoenix compataible reader

 

[psul]

wont work directly in the internal slots.
need an external phoenix compataible reader

Should work fine in internal slot,perfect in my dm800.
Its only the old enigma 1 boxes which needed external reader for this card.

 

[exey]

works like a charm

 

[eldereli84]

not work c+nl files in gamma card!!!!!!!!!!!11

i tested
Gammacard_Update_C+NL02052011.gam

Gammacard_Update_C+NL_TVVlaanderen_20080922.gam

this files not work in gamma

finished gamma card for c+ nl

 

[ADDER]

My gamma card works fine with Gammacard_Update_C+NL_TVVlaanderen_20080922.gam took 6.1/2 hours to update

 

[psul]

not work c+nl files in gamma card!!!!!!!!!!!11

i tested
Gammacard_Update_C+NL02052011.gam

Gammacard_Update_C+NL_TVVlaanderen_20080922.gam

this files not work in gamma

finished gamma card for c+ nl

I used the first file you mention and it works fine on my card.
Took quite a while to update and had to restart box before anything cleared....

 

[crozac]

I used the first file you mention and it works fine on my card.
Took quite a while to update and had to restart box before anything cleared....

Restart is needed due to new provider ID that was send to your card e.g.:
When you insert card in box, serial numbers are as follows:
serial number: 123456
Provider id00: 000001

After you put card in box (usually after 12-24 hours depending on number of active cards), card receives update based on serial number and following change occurs:
serial number: 123456
Provider id00: 102030

The card changes id00 and receives new key that belongs to group 102030.

As the box is not informed about update, box is still sending updates to id00: 000001
In order to get correct updates it is necessary to reinsert card or restart box.
After that Box will be informed about correct new id00 and will send to card correct updates.

The good thing about it that cards starts to work in only few minutes. This issue is occurring with original cards in non official boxes.

So in order to make things work do following:
insert card and leave it over the night on coded channel
next morning reinsert card or restart box
wait aprox 5-10 minutes if the channels does not open your subscription or card it self is not valid.

Bye,

Zac

 

[raulgbox]

hi
my card still working fine with C+NL
what channel of TVV gamma open ?

 

[westonesat]

can confirm still working fine with 20080922 file, just updated. last used 6 months ago.