card reader problem

[cro69]

ok guys im in aus and we have problems with the vu+duo's reading our cloned irdeto cards or gamma,t3 cards any idea as to how to get the box reading these cards???thanks in advance

 

[alias1]

Gamma and T3 run fine in the vu+duo slots

 

[cro69]

no they dont not in australia anyway!!is there a script to read and share the card??

 

[omega99]

the only solution I've come across is to use openpli v1.0 anything above & the gamma won't read.

unless someone has a special config??

 

[linux geek]

gamma ect run fine in vu duo slots

this info is all over this forum

install CCcam if using lower slot place this in your config

CAMKEY : /dev/sci1 00 00 00 00 00 00 00 00
CAMDATA : /dev/sci1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/sci1
SMARTCARD CLOCK FREQUENCY : /dev/sci1 6000000
B : /dev/sci1 06


reboot and all working

 

[omega99]

tried it doesn't work, won't work in oscam either.

work perfectly on openpli v1.0 image, won't work on openpli v2.0 images

using cccam 221

 

[linux geek]

tried it doesn't work, won't work in oscam either.

work perfectly on openpli v1.0 image, won't work on openpli v2.0 images

using cccam 221

that must be a problem you are having with your box as can say its works better in pli 2

have you run the online update to get the latest code ?

 

[cro69]

these cards wont work in the slots at all unless its a modified image and a tweaked version of oscam!!!obviously our cards in australia are very different then the euro ones!!!i got mine working via a modification to my box, i replaced my card reader with a newer one that has a usb port to top slot and connected smargo to the back via the new card slot and card works great!!!

 

[omega99]

where did you get the newer card reader from any suggestions