Can not move motor with 7025

[canary12]

Please can some one help me i have dreambox 7025 for some reason it does not move the motor but my dreambox 500 i have no problem i live in manchester please help me

 

[ig0r]

Find setuo about motor in 7025

As i know you are must set - Motor...or Usals...
If Usals you are must enter your geografic coordinats...

Try find here
http://www.sat-universe.com/forumdisplay.php?f=8
http://www.sat-universe.com/showthread.php?t=41

and tru use complete settings
http://www.sat-universe.com/forumdisplay.php?f=34

 

[canary12]

Dish Problem

Please can some help me i have dreambox 7025 my dish moved so enginer realignt the disk he can move my disk with is meter but i put my lattitude and longtitude which i was using before know it would not work please help i live manchester old trafford but i connect my dreambox 500 no problem dish move ok

 

[Mirrr]

try to save all the files from your Dreambox 500 @ /var/tuxbox/config/enigma specially the "config" file (inside the motor settings, etc) and copy these files to your dreambox 7025.
After copy files do a Hard reset that the configs will loaded correctly and not overwrite the old settings again. Best way is when you switch off the Power from box with 1/0 or power cable.

After that it must be work.

 

[Ferret]

At the bottom of the Tuner/Motor setup you'll see a option to increase LNB power.

Select this it will provide a little more power and may help. Also make sure you have to LNB turned on for each satellite position.

Ferret