You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Amiko HD USB Firmware Update -How To
- Thread starter Traian
- Start date
rainbowcuk
Registered
- Messages
- 1
thanks .. but also do you know any uploader for amiko shd 8140 via RS232 cable?
1- Download uploader program file (extract zip file)
2- Connect RS-232 transfer cable (wiring diagram is as described above) to the PC's COM 1 port.
3- Run the program, select port "COM 1" and "Download Software"
4- Select full software or key .
5- Open the file (above) and click on the "START" command button.
6- Connect the Receiver power cable (plug) to the 220V electric socket.
7- Do not interrupt program or do not power off during transfer! (Otherwise, the receiver will be broken down!)
8- For a succesfull transfer/update, you must read following messages during the program transfering the file:
8.1 - Connecting
8.2 - Transfer
8.3 - Erasing Flash
8.4 - Programming Flash
8.5 - Update Success
9- Power off. End of the upgrading/transfer procedure. The receiver is ready to operate with the new software.
Have a look here
http://www.sat-universe.com/showthread.php?t=211774&page=4
2- Connect RS-232 transfer cable (wiring diagram is as described above) to the PC's COM 1 port.
3- Run the program, select port "COM 1" and "Download Software"
4- Select full software or key .
5- Open the file (above) and click on the "START" command button.
6- Connect the Receiver power cable (plug) to the 220V electric socket.
7- Do not interrupt program or do not power off during transfer! (Otherwise, the receiver will be broken down!)
8- For a succesfull transfer/update, you must read following messages during the program transfering the file:
8.1 - Connecting
8.2 - Transfer
8.3 - Erasing Flash
8.4 - Programming Flash
8.5 - Update Success
9- Power off. End of the upgrading/transfer procedure. The receiver is ready to operate with the new software.
Have a look here
http://www.sat-universe.com/showthread.php?t=211774&page=4
Last edited: