8 in 1 diseqc with Skystar hd2

[paro]

Hi, how can i use 8 in 1 diseqc Skystar hd2 and dvbviewer pro ?

 

[fobos2]

Hi, what exaclty is your problem? Have you already setup your lnbs and diseqc switch? If so, it should be pretty straightforward:
Channel -> Channel Editor -> Select root entry on the left side -> Select DiSEqC and choose PosA/OptA, PosB/OptA etc. Do not forget to install latest drivers from Technisat, published 09.01.2009:
http://www.technisat.com/index6d06.html?nav=Downloads,en,33&pID=215

 

[wickham40]

I think what @fobos2 told you it helps if you have 4/1 diseqc.
In my opinion you have 8/1 diseqc.
In that case you should do the following:
in diseqc:
select : use positioner!
in USUALs:
Position0 =1st LNB

Position1 =2dn LNB

etc..

some 8/1 diseqc support diseqc 1.2 with goto function in that case you can use in diseqc: GOTO Angular and after select the right sat.

wh

 

[sky star 2]

use from latest drive this card and swich 8 to 1 and dvbdream

 

[onion@]

use custom settings
for diseqc

 

[wickham40]

I tested this and works very well:

that case you should do the following:
in diseqc:
select : use positioner!
in USUALs:
Position0 =1st LNB

Position1 =2dn LNB

etc..