Vu solo 2 and xbox tuner

[satinvert]

Hello all,

I bought cheap XBOX ONE tv tuner and connected it to my vu solo 2.
I have OPENVIX 6.2 and this is the log

root@vusolo2:~# opkg install kernel-module-mn88472
Unknown package 'kernel-module-mn88472'.
* opkg_solver_install: Cannot install package kernel-module-mn88472.
root@vusolo2:~#
root@vusolo2:~# opkg install firmware-mn8847x
Package firmware-mn8847x (1.0-r0) installed in root is up to date.
root@vusolo2:~#
root@vusolo2:~# opkg install kernel-module-dvb-usb-dib0700
Package kernel-module-dvb-usb-dib0700-3.13.5 (3.13.5-oea4.3-r5) installed in root is up to date.
root@vusolo2:~#
root@vusolo2:~# opkg install firmware-dvb-usb-dib0700-1.20
Package firmware-dvb-usb-dib0700-1.20 (1.0-r0) installed in root is up to date.
root@vusolo2:~#
root@vusolo2:~# opkg install kernel-module-tda18250
Unknown package 'kernel-module-tda18250'.
* opkg_solver_install: Cannot install package kernel-module-tda18250.

I think i need some sort of kernel update.
This is lsusb:

root@vusolo2:~# lsusb
Bus 004 Device 002: ID 045e:02d5
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0002
Bus 003 Device 001: ID 1d6b:0002
Bus 004 Device 001: ID 1d6b:0002
Bus 005 Device 001: ID 1d6b:0001
Bus 006 Device 001: ID 1d6b:0001
Bus 007 Device 001: ID 1d6b:0001
Bus 008 Device 001: ID 1d6b:0001

Pls help

 

[Ferret]

It needs kernel 4.2.x and newer on OE-A images not sure the kernel goes that high on the Solo 2 images or not, but its a start point for you to research.

 

[satinvert]

Yes that might be a problem, i think this is last kernel

Kernel / Drivers:

3.13.5 / 20190429