manic01
Super VIP
- Messages
- 2,977
That would depend on what TP you are trying to view on?Is TNT sports 2 HD clear for anyone? Do I need to scan another transponder?
All ok on viark
That would depend on what TP you are trying to view on?Is TNT sports 2 HD clear for anyone? Do I need to scan another transponder?
All fine here on TNT 2 HD 11582 H 23000
Get sorted ok?Ok thanks I’ll rescan
Select yes to network scan, it should add more channels for each provider it finds.Yea thanks, scanned the transponder and it came in, not sure what happened as only scanned the last time they moved?
Would a blind scan have picked this up?
Also what is a network scan?
Only if its a hybridWill it work on a sky q lnb
If its Sky Q non hybrid it wont workNot sure mine is still showing scambled but I do have signal
And epg
Have you checked your LNB settings as a first step ?My Viark Droi has a fault, the sat signal strength is stuck at 28% and flicks to 0. The lnb is fine as if I plug it in to my tv I am able to get freesat. Does anyone have any ideas, has my box died?
Yeah, they are all good. I have 3 lnbs, whichever one i switch to and whichever channel i switch to, the signal stays on 28%. Even with a direct feed and the diseq turned off, same thing.Have you checked your LNB settings as a first step ?
Do you have a signal meter?Yeah, they are all good. I have 3 lnbs, whichever one i switch to and whichever channel i switch to, the signal stays on 28%. Even with a direct feed and the diseq turned off, same thing.
Just wanted to add that it is possible that your dish is currently slightly out of alignment with 28.2E and hence the cause of your loss of signal.Do you have a signal meter?
What size is your dish?
What make and brand are your LNBs?
If you have access to a signal meter, and can reposition the dish, then it might be worth trying to point the dish to 19.2E which is a powerful satellite.
Use flysat, lyngsat or KingOfSat to note suitable and powerful transponders on 19.2E. A good one to try would be....
TP Freq = 12188, Pol = H, S/R = 27500, FEC=3/4. This is also a DVB - S1 Transponder so tends to be easier to lock than S2.
Then connect to your Viark Droi and see what happens.
Additionally, it may be well worth you reloading the default factory firmware and starting your set up again. This is not patch software,
but the latest standard firmware.
I hope the above suggestions prove to be of some help, but keep us informed of your progress.
Cheers.
Just wanted to add that it is possible that your dish is currently slightly out of alignment with 28.2E and hence the cause of your loss of signal.
It is worth checking that the dish is optimally aligned.
Something is amiss either stb is faulty, or settings need reinputting or cable issues or switch etc, as it works direct to tv.The lnb is fine as if I plug it in to my tv I am able to get freesat. Does anyone have any ideas, has my box died?
Something is amiss either stb is faulty, or settings need reinputting or cable issues or switch etc, as it works direct to tv.
What model box and i take it fixed dish 28eAll working on a old lnb
Could anybody point me in the direction of a decent Chanel list
Thanks.