Viark Forever boxes

[manic01]

The new channels "Canal+ Extra 1 2 3 4" are active on the 13E at frequency 11411 H 27500. But my Viark 4k can't find them. Can you try it too?

I read in another thread that they were testing those channels and then they disappeared.

Correct my friend, answer is HERE

 

[serpiko]

I would start again.
Flash factory firmware.
Factory Reset
Flash PT Firmware
Factory Reset
Setup Box

Id also try another PSU.

What is PSU ? Where I can download the PT firmware ?

 

[kegnkiwi]

What is PSU ? Where I can download the PT firmware ?

PSU means power supply unit ie the plug. The software is on this forum.

 

[dbstat]

On the Viark, how to put the diseqc 1.2 motor position number of each satellite from the menu? I don't have Usals motor, just manual diseqc 1.2.
The position numbers on the motor were already stored using a different receiver, I only need to set up the numbers on the Viark but can't find the option on the menu.
can anyone help?

 

[Jester1]

On the Viark, how to put the diseqc 1.2 motor position number of each satellite from the menu? I don't have Usals motor, just manual diseqc 1.2.
The position numbers on the motor were already stored using a different receiver, I only need to set up the numbers on the Viark but can't find the option on the menu.
can anyone help?

So you want to organise the order satellite's appear in the list?

1, Installation
2, Antenna Configuration
3, Satellite then OK button
4, Choose satellite
5, Right arrow across to Move then OK button
6, Input position you want to move to then OK button

 

[cokeaddict]

So you want to organise the order satellite's appear in the list?

1, Installation
2, Antenna Configuration
3, Satellite then OK button
4, Choose satellite
5, Right arrow across to Move
6, Input position you want to move to

No he wants to assign each sat, to the vbox position they are stored in

 

[dbstat]

So you want to organise the order satellite's appear in the list?

1, Installation
2, Antenna Configuration
3, Satellite then OK button
4, Choose satellite
5, Right arrow across to Move then OK button
6, Input position you want to move to then OK button

Hi, no that's not the problem.
I want to tell the Viark that Astra 2 is on position 1 of the motor, Astra 1 on position 2 and Hotbird on number 3.
I can't find this option on the menu

 

[barney115]

USALS on both boxes is your only solution since you'll will be very often switching between boxes .
Since you'll be adjusting #1 , #2 for each of your boxes all day every day trying with Disecq settings which is nonsense and silly
Disecq is just not useful for you no more .

 

[manic01]

Hi, no that's not the problem.
I want to tell the Viark that Astra 2 is on position 1 of the motor, Astra 1 on position 2 and Hotbird on number 3.
I can't find this option on the menu

Not possible afaik, unless you have an editor that might show it, I know you can do it on Technomate using clarke tech editor

 

[manic01]

USALS on both boxes is your only solution since you'll will be very often switching between boxes .
Since you'll be adjusting #1 , #2 for each of your boxes all day every day trying with Disecq settings which is nonsense and silly
Disecq is just not useful for you no more .

If viark and say TM5402 have each sat position stored the same ie 28e on pos 1 hotbird pos 2 etc etc it will work fine, agreed usals is the best solution though

 

[dbstat]

---

Thank you for the answers.
As I said, my motor is not Usals, but works perfectly with Enigma2 receiver on diseqc 1.2.
So, I Just need to know what position Number the Viark uses for Astra 2, Astra 1 and Hotbird, if someone can read it from an editor?

 

[manic01]

---

Thank you for the answers.
As I said, my motor is not Usals, but works perfectly with Enigma2 receiver on diseqc 1.2.
So, I Just need to know what position Number the Viark uses for Astra 2, Astra 1 and Hotbird, if someone can read it from an editor?

It stores it in the order you save the satellites

 

[kegnkiwi]

It stores it in the order you save the satellites

It sounds like he needs to make his own list up and scan in each satellite in the order that he wishes to store them in diseq 1.2 then.

 

[cokeaddict]

There is no option to save diseqc position on the Viark Sat 4K or Gtmedia V8 UHD, that I have found.

 

[dbstat]

It stores it in the order you save the satellites

Hi, do you mean I have to press Store first on Astra 2, then go to Astra 1 and press store, and then Hotbird to replicate the order I currently have on the Enigma2 receiver?

 

[sat gr]

is it possible to convert the .sdx file to .chl to upload to metamango?

 

[1980nicola]

Are the rumors regarding Sky Ita just speculation or is there any truth to them?

 

[barney115]

none whatsoever , plenty of rumors about but that is usually all it ever amounts to .
There is as always little hope but its very little hope , just like Cosmote always odd rumor regarding it but nothing ever amounts to anything .
not quite sure how this relates to Viark box however ?? ....i would advise to contact your supplier as they will know all your answers i am certain : )
Good luck : )

 

[1980nicola]

none whatsoever , plenty of rumors about but that is usually all it ever amounts to .
There is as always little hope but its very little hope , just like Cosmote always odd rumor regarding it but nothing ever amounts to anything .
not quite sure how this relates to Viark box however ?? ....i would advise to contact your supplier as they will know all your answers i am certain : )
Good luck : )

Cosmote is expected to move to 13E and join Nova by the end of the month. So if we see Nova, we should also see Cosmote..

 

[kegnkiwi]

Cosmote is expected to move to 13E and join Nova by the end of the month. So if we see Nova, we should also see Cosmote..

Unless Nova change their encryption to be more secure?