Viark Forever boxes
- Thread starter Youknowme02
- Start date
manic01
Super VIP
- Messages
- 2,877
Don't think there a feneki version
- Messages
- 1,173
No i have not seen one, i'll just have to use my own and update it unless i find one around somewhere.
- Messages
- 17,741
- Messages
- 1,173
Yeh done that on 15w tonight Scanned in all the beam back channels. Just not showing any signal quality on those channels. E2 on solo 4k getting 85%. Just need a little time to remind myself how to play with itBlindscan all sat positions under multiscan
Sort A-Z
Job done
And what about Total TV 16e, yes or no? Should I install the antenna and the receiver?
Total TV is 'scramble channel' currentlyAnd what about Total TV 16e, yes or no? Should I install the antenna and the receiver?
manic01
Super VIP
- Messages
- 2,877
You need to contact forever team, no one on here can say for sure.
Last edited:
Hi, does anyone know why this is happening to me with the info bar??
Thanks
Thanks
- Messages
- 25,498
Try Menu> Settings > OSD Settings
Menu Transparency = 10
TXT Transparency = 10
Display Mode - 1080i 50hz
HDR = Auto
OSD Scale = 0%
TV Type = PAL
Try Menu> Settings >
Color Configuration
Set all @ 50% or Press Default OK button
There has to be a brightness info bar setting in the Menu that you changed too high
those are my settings and info bar looks fine .
Good luck : )
Menu Transparency = 10
TXT Transparency = 10
Display Mode - 1080i 50hz
HDR = Auto
OSD Scale = 0%
TV Type = PAL
Try Menu> Settings >
Color Configuration
Set all @ 50% or Press Default OK button
There has to be a brightness info bar setting in the Menu that you changed too high
those are my settings and info bar looks fine .
Good luck : )
manic01
Super VIP
- Messages
- 2,877
Hi, does anyone know why this is happening to me with the info bar??
Thanks
Any luck with @barney115 advise?
Everything is fine now, thank you
- Messages
- 17,741
Normal but a pain, you could do each position manually.
- Messages
- 25,498
That option works best only for Multi LNB Set ups
as said you are better off simply being patient and scanning each sat individually
that way you are not missing a ton of Transponders and channels
i usually take a 20-30 mins to Move and Edit channels after scanning each Sat
then when you get full Arc scanned be sure to save your Channel list to USB for the next time they push out a S/W update
which wipes away all your channels and hard work
Good luck : )
as said you are better off simply being patient and scanning each sat individually
that way you are not missing a ton of Transponders and channels
i usually take a 20-30 mins to Move and Edit channels after scanning each Sat
then when you get full Arc scanned be sure to save your Channel list to USB for the next time they push out a S/W update
which wipes away all your channels and hard work
Good luck : )
butchyboy
Senior Member
- Messages
- 350
guys i went to record the fight tonight for a neighbour and a i inserted a usb stick and i pressed the red button at the very bottom of the remote and it seemed to record ok,but when i went to plug it in to usb on tv and pc it would not play correctly very intermitten etc not free flowing etc any ideas ????????????????????? thanks
manic01
Super VIP
- Messages
- 2,877
Needs to be played back via the Viark stb?