siamak55861
Registered
- Messages
- 11
IMPORTANT! About U. S. The scripts for backup-restore
DOWNGRADE to avoid some of the files, perform the following steps:
1) download the package from online backup-restore-R9
2) Run the backup script-R9
3) Insert the new firmware R13787-EXTENDED
4) Run the script RESTORE R9 (already installed)
-------------------------------------------------- --------------------------
SifPanel expanded with the buttons 8 and 9 dse epg for the management
8 is in the memory by pressing the EPG from the file / media / EPG / loaded epgdata.dat
9 press before you download the EPG, then the EPG
loaded in memory
These two operations can be performed either through plugins or scripts.
To illustrate the type design with green / green-script to be executed
scrplg-Select_Epg.plugin_or_Epg.script.sh
-------------------------------------------------- --------------------------
Yellow button is associated with the plugin, the aspect ratio of Changes
-------------------------------------------------- --------------------------
New Clean-r2-poweroff reboot (reboot and poweroff from sifpanel)
Log files in the directory / var / log and restart operations poweroff
-------------------------------------------------- --------------------------
Auto-activation of the swap partition dev/sda1
-------------------------------------------------- --------------------------
Scheduler Micrond preinstalled
-------------------------------------------------- --------------------------
Script SaveMyUsb.sh
Make the backup (in the folder / media / MyUsbFirmware) in tar.gz format
Firmware, or from a USB stick
-------------------------------------------------- --------------------------
Boot Logo created in 3D for Flash and USB Imges
-------------------------------------------------- --------------------------
New Backup Restore r9
Saving and restoring settings of the decoder
-------------------------------------------------- --------------------------
New RSS link
Latest news from the major Italian
Also added news from stream board
-------------------------------------------------- --------------------------
Skins Extended (medium-channel-list and extended list)
-------------------------------------------------- --------------------------
Multiboot_SDB1_2_3_4-r4
Key 0 - DGS-FLASH
Key 1 - ENIGMA SDB1
Key 2 - ENIGMA sdb2
Key 3 - ENIGMA sdb3
Key 4 - ENIGMA SDB4
Key 5 - DGS-SDB1
Key 6 - DGS-sdb2
Key 7 - DGS-sdb3
Key 8 - DGS-SDB4
Key 9 - ENIGMA FLASH
New Show_Multiboot_and_UsbFirmware
This script is with green / green executable
Installed on the TV and firmware in multiboot USB stick and Highlights
in with the word "RUNNING" use any USB firmware
New telnet command format sdb
To format a USB flash drive partitions of 4 with the following syntax:
SDS-1 format
sdb-2 format
sdb-3 format
sdb-4 format
http://hotfile.com/dl/126877875/50ed6dc/r0691-13787-Extended-91.tar.gz.html
http://hotfile.com/dl/126880151/48ca1b0/r0691-13787-Extended-91-USB.tar.gz.html
DOWNGRADE to avoid some of the files, perform the following steps:
1) download the package from online backup-restore-R9
2) Run the backup script-R9
3) Insert the new firmware R13787-EXTENDED
4) Run the script RESTORE R9 (already installed)
-------------------------------------------------- --------------------------
SifPanel expanded with the buttons 8 and 9 dse epg for the management
8 is in the memory by pressing the EPG from the file / media / EPG / loaded epgdata.dat
9 press before you download the EPG, then the EPG
loaded in memory
These two operations can be performed either through plugins or scripts.
To illustrate the type design with green / green-script to be executed
scrplg-Select_Epg.plugin_or_Epg.script.sh
-------------------------------------------------- --------------------------
Yellow button is associated with the plugin, the aspect ratio of Changes
-------------------------------------------------- --------------------------
New Clean-r2-poweroff reboot (reboot and poweroff from sifpanel)
Log files in the directory / var / log and restart operations poweroff
-------------------------------------------------- --------------------------
Auto-activation of the swap partition dev/sda1
-------------------------------------------------- --------------------------
Scheduler Micrond preinstalled
-------------------------------------------------- --------------------------
Script SaveMyUsb.sh
Make the backup (in the folder / media / MyUsbFirmware) in tar.gz format
Firmware, or from a USB stick
-------------------------------------------------- --------------------------
Boot Logo created in 3D for Flash and USB Imges
-------------------------------------------------- --------------------------
New Backup Restore r9
Saving and restoring settings of the decoder
-------------------------------------------------- --------------------------
New RSS link
Latest news from the major Italian
Also added news from stream board
-------------------------------------------------- --------------------------
Skins Extended (medium-channel-list and extended list)
-------------------------------------------------- --------------------------
Multiboot_SDB1_2_3_4-r4
Key 0 - DGS-FLASH
Key 1 - ENIGMA SDB1
Key 2 - ENIGMA sdb2
Key 3 - ENIGMA sdb3
Key 4 - ENIGMA SDB4
Key 5 - DGS-SDB1
Key 6 - DGS-sdb2
Key 7 - DGS-sdb3
Key 8 - DGS-SDB4
Key 9 - ENIGMA FLASH
New Show_Multiboot_and_UsbFirmware
This script is with green / green executable
Installed on the TV and firmware in multiboot USB stick and Highlights
in with the word "RUNNING" use any USB firmware
New telnet command format sdb
To format a USB flash drive partitions of 4 with the following syntax:
SDS-1 format
sdb-2 format
sdb-3 format
sdb-4 format
http://hotfile.com/dl/126877875/50ed6dc/r0691-13787-Extended-91.tar.gz.html
http://hotfile.com/dl/126880151/48ca1b0/r0691-13787-Extended-91-USB.tar.gz.html