v8 pro2

[shadowrider]

Hy, today nothing works, on the front panel only "boot"

 

[JAKITAKI]

Hy, today nothing works, on the front panel only "boot"

re-upload the software

1. Unpack the zip software to a bin file.
2. Rename XXXX.bin to flash.bin
3. Copy the flash.bin file to the root directory of the USB flash drive.
4. Insert the pen into the tuner USB socket
5. Connect the power and press 'MENU' on the remote control.
Note: Press the button continuously.
7. UP9 should appear on the display ，
8. After releasing the MENU button, go to update mode

or

1. Download the firmware, (the file is named: flash.bin), and put it in the U disk and directory
2. Insert the USB port of the machine
3. Connect the serial port -> select the platform -> press ok -> restart the box

 

[shadowrider]

Now it show L027 on the panel and black screen o nTV


---- on the panel

 

[maleka]

hi theretry switch from pall to ntsc or back you should have a buton on your remote saying tv mode try change mode a few times than wait each time allow your tv to reconized hope helps .

 

[shadowrider]

any button i press on the remont controll nothig works, whed the usb is in i get ----, when its out L027 or L009 on the front panel