- Messages
- 10,198
Modified image of Kathrein:
- patched kernel so that a second boot loader (2nd BL) can be installed for all barry
- integrated and ftdi pl2303 driver for operating an external USB card reader (eg Smargo)
- gz-Stapi integrated including a basic configuration for 2 card reader
• Image (6) files via USB flash drive
• Wait! The box will boot automatically after installation by 1x.
• In the menu - Settings own satellite and network configuration to adapt
• KCC3.2 start. Network Setting. In the Settings tab should be button "Test Connection" is already 4x OK are reported.
• button "install 2nd Boot Loader ". Positive await confirmation.
• Box shut down and the power switch off.
• If you already have an installed Barry Allen (BA) has embroidery, this plug in the USB port and boot BOX.
• In the "Barry Allen" 1x press the button "BA patch". Done.
• The next time you restart your got your BA then menu.
- patched kernel so that a second boot loader (2nd BL) can be installed for all barry
- integrated and ftdi pl2303 driver for operating an external USB card reader (eg Smargo)
- gz-Stapi integrated including a basic configuration for 2 card reader
• Image (6) files via USB flash drive
• Wait! The box will boot automatically after installation by 1x.
• In the menu - Settings own satellite and network configuration to adapt
• KCC3.2 start. Network Setting. In the Settings tab should be button "Test Connection" is already 4x OK are reported.
• button "install 2nd Boot Loader ". Positive await confirmation.
• Box shut down and the power switch off.
• If you already have an installed Barry Allen (BA) has embroidery, this plug in the USB port and boot BOX.
• In the "Barry Allen" 1x press the button "BA patch". Done.
• The next time you restart your got your BA then menu.