You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
ubuntu expert please . lost now.
- Thread starter bradowen
- Start date
thanks m8 ..not quite ..still struggling abit .. i think im missing that driver in your link ..but im not to sure about the new cs and cccam..it was working in 127.0.0.1 :1600
but after the new cs was added it stopped m8 ..
i used the ubuntu 10.04 .( for standalone pc linux)automated with new cs 167 automated but still no joy yet m8 ..thanks..i might have to start from scratch
but after the new cs was added it stopped m8 ..
i used the ubuntu 10.04 .( for standalone pc linux)automated with new cs 167 automated but still no joy yet m8 ..thanks..i might have to start from scratch
i installed ubuntu 9.10 fresh..i think ive put drivers in
Tue Dec 7 11:21:22 2010
Reader 0: OmniKey CardMan 3121 00 00
Card state: Card inserted,
ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
+ TS = 3F --> Inverse Convention
+ T0 = FD, Y(1): 1111, K: 13 (historical bytes)
TA(1) = 13 --> Fi=372, Di=4, 93 cycles/ETU
43010 bits/s at 4 MHz, fMax for Fi = 5 MHz => 53763 bits/s
TB(1) = 25 --> Programming Param P: 5 Volts, I: 1 milliamperes
TC(1) = 02 --> Extra guard time: 2
TD(1) = 50 --> Y(i+1) = 0101, Protocol T = 0
-----
TA(2) = 00 --> Protocol to be used in spec mode: T=0 - Capable to change - defined by interface bytes
TC(2) = 0F --> Work waiting time: 960 x 15 x (Fi/F)
+ Historical bytes: 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
Category indicator byte: 33 (proprietary format)
Possibly identified card (using /usr/share/pcsc/smartcard_list.txt):
NONE
Your card is not present in the database.
You can get the latest version of the database from
http://ludovic.rousseau.free.fr/softwares/pcsc-tools/smartcard_list.txt
or use: wget http://ludovic.rousseau.free.fr/softwares/pcsc-tools/smartcard_list.txt --output-document=/root/.smartcard_list.txt
If your ATR is still not in the latest version then please send a mail
to <[email protected]> containing:
- your ATR
- a card description (in english)
now i can put on automated cccam no probs ..but when i put newcs on 167 automated ..i cant connect to apache anymore ..think i need newcs configured right . ( which ive never done before.
Tue Dec 7 11:21:22 2010
Reader 0: OmniKey CardMan 3121 00 00
Card state: Card inserted,
ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
+ TS = 3F --> Inverse Convention
+ T0 = FD, Y(1): 1111, K: 13 (historical bytes)
TA(1) = 13 --> Fi=372, Di=4, 93 cycles/ETU
43010 bits/s at 4 MHz, fMax for Fi = 5 MHz => 53763 bits/s
TB(1) = 25 --> Programming Param P: 5 Volts, I: 1 milliamperes
TC(1) = 02 --> Extra guard time: 2
TD(1) = 50 --> Y(i+1) = 0101, Protocol T = 0
-----
TA(2) = 00 --> Protocol to be used in spec mode: T=0 - Capable to change - defined by interface bytes
TC(2) = 0F --> Work waiting time: 960 x 15 x (Fi/F)
+ Historical bytes: 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
Category indicator byte: 33 (proprietary format)
Possibly identified card (using /usr/share/pcsc/smartcard_list.txt):
NONE
Your card is not present in the database.
You can get the latest version of the database from
http://ludovic.rousseau.free.fr/softwares/pcsc-tools/smartcard_list.txt
or use: wget http://ludovic.rousseau.free.fr/softwares/pcsc-tools/smartcard_list.txt --output-document=/root/.smartcard_list.txt
If your ATR is still not in the latest version then please send a mail
to <[email protected]> containing:
- your ATR
- a card description (in english)
now i can put on automated cccam no probs ..but when i put newcs on 167 automated ..i cant connect to apache anymore ..think i need newcs configured right . ( which ive never done before.