The new AlonzoBLUE 2.2

baha2

Super VIP
Messages
6,530
( OpenRSi-OPenPLi tabanlı ULK 3.3.1) OpenPLi-image_AlonzoBLUE_2.2



The new AlonzoBLUE 2.2 Software

Hello!

Being an OpenRSI based new software, it is the last 29 April 2013 dated software before some of the basic changes made after 30 April 2013. Therefore the importance of this software is something otherwise and I advice you to keep it well. Some of the errors in theversions after 29th April still exist.

When you install the software, it will be its first be opened in your computer. So, the modules in each model will be installed specifically to the computer’s model in all of AzboxHD models. The new generation (3.0) software requires this. Therefore this software is quite different compared to my previous mods.

Some of the known bugs such as the green screen problem that occured during Scart option (Video Wizard) in the initial installation, of which we read in foreign forms, are removed. Some users will have to use Scart socket when they have problem with their HDMI connections. There is no green screen problem in MediaCenter. There are a lot of changes made in python files. All camd extensions, particularly AzboxWeather, have been rearranged to be practical (international). ScalingModes have been used in RESOLUTIONbutton. This extension is not found in any other OE 2.0 software. PingFloodKeymap has also been modified for OE 2.0 software in the same way. Again the special Camd extensions are in total accord in order to be able to launch from CamdManager from the CHECKbutton.


The software has been prepared for DOM and USB respectively. There are additional 17mb long extensions such as Picon, PiconProv, PiconSat in USB software than in DOM software. Some additional new interfaces such as Concinnity, HD-glass16, GreenPortakal, Metrix and famous Newigma2 have been added as the skins. Also latent extended part of USB memory (sda5) has been activated and with this TimeShift function as well as recording function can be used even there is no hdd docked in the system. Hence I advise you use memory with 16 GB capacity. Even the 1 GB memory I used in my trials was enough to make a bit of recording.

While there is 5MB empty space remaining in the software installed to DOM, although 20 MB more installation has been made in USB memory installation, there a hundreds of MB empty space left empty according to the capacity of your memory. Therefore a relief has been achieved in the running of the system.

Software update system feature has been removed system crash since daily faulty files can occur in the updates. PLI SoftCam is also erased.

After choosing at least one location in Wheater extension, the weather can be viewed in navy, GreenPortakal and Metrix interfaces on infobar screen.

You can find some pictures below.

After finishing the installation and loading channel files, if you are using CCcam.cfg file, activate CCcam from the CHECK button after sending the file into /etc and start enigma again.

If you install from USB which is recommended, and if a software with 3.3.1 kernel is installed on DOM, you do not need to install kernel again. In this way, you can use 2 different softwares in the device. For this type of installation, display for AZUp installation is given below.

Enjoy!

Regards,


1boot.jpg



2menu.jpg



3infobar.jpg



4secondinfobar.jpg



5chlist.jpg



6plugins.jpg



7shortkeys.jpg



8skins.jpg



9concinnity.jpg


10glass16.jpg



11green.jpg



12metrix.jpg




After completing the installation and install the channel files, if you are using a CCcam.cfg file / etc to send into the Enigma key CCcam'i Please activate CHECK restart.* If the USB installation it is recommended that, if the DOM is a software kernelli 3.3.1 is installed, you do not need to install the new kernel. The apparatus can also use a different 2 software. AZUp for this type of installation is the setup screen






OpenPLi-image_AlonzoBLUE_2.2
 

amyren

Registered
Messages
106
Thanks for the upload. Its a good image.
Was a bit unstable at first for me, but after performin a rescan of all my sattelites it was quite stable.

Only one issue, I did an online update and after this the spinner image got sort of currupted, only 1/4 of the azbox logo shows when the spinner goes for a short while, then the standard cog wheels show for a few seconds, then the 1/4 azbox logo again etc..
Not a big issue, but it looks a bit weird.
 

candyman2

Donating Member
Messages
71
I am use this Firm Ware at the momment and it is the best one so far,the only problem i have,when i do alot of channel changing on the quick, it shows the spinner and slows the change down, i need to reboot the reciver then its ok again.
 

solochiz

Registered
Messages
1
pour essai

bonjour, je viens de télécharger l'image .... merci pour le poste ça donne envie de rafraîchir le AZbox après une durée de mort :)
 

bartali8

Registered
Messages
3
Azbox premium blocked

Hi, I have installes this image and it runs fine for some days. Now it start normally but when it show the tv program, after some seconds, the decoder freeze. I try to reboot with same result. Someon can help me? thanks:)
 

candyman2

Donating Member
Messages
71
Try to uninstall some Plugins these Recivers are not made for E2. I installed a 1GB Dom in my Reciver,but sometimes it still plays up and i have to reboot, it works fine again.
 

jrcna

Registered
Messages
1
What is the best Enigma2 version for azbox elite hd? PS: I need one that works well by front panel buttons because my remote does not work.

I have tested openspa and works better than openrsi 3.0 because openrsi front panel not support channel changes.

BR
 
Top