SifTeam-DM7000-Images

Status
Not open for further replies.

tahir85pk

Super VIP
Messages
936
SifTeam-1.0-dm7000
Rilascio 18.11.2006

Immagine per FLASH / USB / HDD / CF

- Enigma 1.09 - CVS aggiornato al 17/11/2006
- FP Firmware 1.01
- busybox v1.01
- WebIf 5.9.7-Expert
- Tuxtxt v. 1.98
- Pmt.tmp presente
- with-webif=expert
- with-epg=private
- with-enigma-debug=yes
- with-reiserfs=yes
- with-flashtool=expert
- with-mhw_epg=yes


Plugins, Addons, Giochi e Varie:
-Razzlugins:-
DREAMFLASH
MOVIEPLAYER
NGRABSTART
NGRABSTOP
TUXCOM

-:Giochi:-
PACMAN
SNAKE
TETRIS

-:Skin aggiunti:-
MULTILINE ver.5
(Default all'avvio, ...ottimizzato per picon 0.0.Cool

-:Lingue:-
Enigma = Tutte le disponibili
Blu Panel = Inglese - Italiano



============================================================
Istruzioni per l' utilizzo dell'immagine SIFTEAM-*.* per DM7000S
============================================================
Opzioni in Blu Panel:
RESTART ENIGMA
GESTIONE AMULE
GESTIONE DNS
GESTIONE BACKUP
INSTALLA ADDONS
RIMUOVI ADDONS
CREA SWAPFILE
VISUALIZZA FILE
SCARICA ADDONS
Tasto Giallo (HDD)
Tasto Blu (gestione emu)
Tasto Verde (script)

RESTART ENIGMA:
Si riavvia l'interfaccia grafica ENIGMA

GESTIONE AMULE:
Questo menu' e' presente solo se si e' installato il pacchetto amule-hdd (di default no).
Amule e' un programma per scambio file (non scambiate i file protetti da Copyright),
l'omonimo in WindowsXP® si chiama Emule.
Avviando questa opzione si apre un'altra finestra con la scelta di start/stop (leggere
la documentazione fornita con il pacchetto amule-hdd).

GESTIONE DNS:
Questo menu' e' presente solo se si e' installato il pacchetto ctdyn (di default si'Wink, in
pratica serve per aggiornare il proprio DNS (tipo no-ip, dyndns ecc..).
Il programma e' configurabile da interfaccia grafica richiamabile da telecomando.
Comunque ho gia' inserito un file /etc/ctdyn.conf da modificare facilmente anche via ftp.

GESTIONE BACKUP:
In questa immagine le cose piu' "importanti" risiedono in /var/etc e' percio' consigliato
eseguire un backup anche giornaliero di questa directory.
Avviando questa opzione si apre un'altra finestra con la scelta del
"supporto di destinazione" CF USB HDD.
Di default e' impostato a /var/etc ma si puo' cambiare modificando il file /var/etc/SifTeam/backupdir,
oppure da interfaccia grafica richiamabile da telecomando.

INSTALLA ADDONS:
Compatibile con gli addons della GEMINI, basta copiare il file .tar.bz2 in /tmp
avviare questa opzione e dalla finestra che appare scegliere l'addons da installare.
Basta andare nel sito della gemini scaricarsi i file desiderati (sono in estensione .tar.bz2)
tramite un ftp copiarli nella directory /tmp del dreambox, andare
in blu panel -> Installa addons -> selezionare l'addons da installare e premere OK

RIMUOVI ADDONS:
Avviare questa opzione e dalla finestra che appare scegliere l'addons da disinstallare.

CREA SWAP FILE:
Lo swap file altro non e' che della "memoria virtuale".
Dalla finestra che appare scegliere il "supporto di destinazione" CF USB HDD.
Si puo' impostare a 32MB marcando il checkbox.

VISUALIZZA FILE:
Avviare questa opzione e dalla finestra che appare scegliere il file da visualizzare,
di default e' impostato nella dir. /var/keys ma si puo' modificare da interfaccia
grafica richiamabile da telecomando.

SCARICA ADDONS:
Selezionare la categoria poi l'addons da scaricare/installare e premere OK

Tasto Giallo: (HDD)
Avviare questa opzione e dalla finestra che appare settare i propri valori.
E' possibile scegliere 2 opzioni HIGH e LOW
HIGH = acoustic 254 timeout 5 minuti
LOW = acoustic 128 timeout 2 minuti

Tasto Blu: (gestione emu)
Questo gestisce gli EMU, gli emulatori servono per usare le proprie "CARD ORIGINALI".
Compatibile con i pacchetti EMU della GEMINI, ma si possono anche installare a mano:
copiare in /var/bin i file che lanceranno l'eseguibile, il file deve essere in
formato "nomeemu_cam.sh" (...importante "_cam.sh"Wink.
Il programma cerca tutti i file con il nome che termina per "_cam.sh" presenti in /var/bin
e li mette in lista, per avviare/fermare/riavviare/.
Quando si sceglie "avvia" il programma, oltre che avviare subito l' EMU, crea dei file
necessari per l'avvio automatico dell' EMU scelta, in modo che se si spegne il decoder al
prossimo riavvio si avra' l' EMU scelta avviata.

Tasto Verde: (script)
Questo gestisce degli script ( utility), che permettono di vedere a video delle utili
informazioni sul sistema, inoltre in questa schermata e' presente l'opzione di
"ONLINE UPGRADE", se utilizzata (ED ONLINE E' DISPONIBILE UN UPGRADE) esegue un
"UPGRADE" del Sistema, alla fine nella schermata di output si
avra' il resoconto dell'operazione di aggiornamento, se sono stati Upgradati i
pacchetti "Pannello - Enigma* - Skin Multiline e' necessario un reboot di Enigma o
del Dreambox.

WebInterface:
La WebIf ha ora un bottone in piu' "SifTeam Info", se premuto
aprira' una nuova pagina con altre opzioni.

===============================================================

PER TUTTE LE INFO SULLA GESTIONE DELL'IMG LEGGERE LA DOCUMENTAZIONE ALL'INTERNO

UN RINGRAZIAMENTO PARTICOLARE A NGC1927 E TUTTO LO STAFF PER TUTTO L'IMPEGNO PROFUSO

ATTENZIONE:
QUESTO FIRMWARE NON CONTIENE CHIAVI, NE' EMULATORI, NE'
INDIRIZZI PER SCARICARE MATERIALE ILLEGALE DI NESSUN TIPO.
L'AUTORE NON E' RESPONSABILE IN NESSUN MODO DELL'USO CHE
GLI UTENTI NE FARANNO, DI LORO SPONTANEA VOLONTA'.

THIS FIRMWARE DOES NOT INCLUDE KEYS, NOR EMULATORS, NOR
URLS FOR DOWNLOADING ILLEGAL STUFFS OF ANY TYPE.
AUTHOR IS NOT RESPONSIBLE IN ANY WAY FOR WHAT
THE USERS WILL DO WITH THIS FIRMWARE.
D/l from here: link edited since file is uploaded
 
X

xtrue

SifTeam-1.1-dm7000

Thx SifTeam....info only in italian

Code:
Aggiornata immagine per Dreambox7000.
-----------------------------------
SifTeam-1.1-dm7000
Rilascio 30.11.2006

Immagine per FLASH / USB / HDD / CF

- Enigma 1.09 - CVS aggiornato al 28/11/2006
- FP Firmware 1.01
- busybox v1.01
- WebIf 5.9.7-Expert
- Tuxtxt v. 1.98
- Pmt.tmp presente
- with-webif=expert
- with-epg=private
- with-enigma-debug=yes
- with-reiserfs=yes
- with-flashtool=expert
- with-mhw_epg=yes


Plugins, Addons, Giochi e Varie:
Plugins:
DREAMFLASH
MOVIEPLAYER
NGRABSTART
NGRABSTOP
TUXCOM

-:Giochi:-
PACMAN
SNAKE
TETRIS

-:Skin aggiunti:-
MULTILINE ver.5
( Default all'avvio, ...ottimizzato per picon 0.0.8 )

-:Lingue:-
Enigma = Tutte le disponibili
Blu Panel = Inglese - Italiano 

================================================== ==========
Istruzioni per l' utilizzo dell'immagine SIFTEAM-*.* per DM7000S
================================================== ==========
Opzioni in Blu Panel:
RESTART ENIGMA
GESTIONE AMULE
GESTIONE DNS
GESTIONE BACKUP
INSTALLA ADDONS
RIMUOVI ADDONS
CREA SWAPFILE
VISUALIZZA FILE
GESTIONE FIREWALL
Tasto Giallo (HDD)
Tasto Blu (gestione e-m-u)
Tasto Verde (script)

RESTART ENIGMA:
Si riavvia l'interfaccia grafica ENIGMA

GESTIONE AMULE:
Questo menu' e' presente solo se si e' installato il pacchetto amule-hdd (di default no).
Amule e' un programma per scambio file (non scambiate i file protetti da Copyright),
l'omonimo in WindowsXP® si chiama Emule.
Avviando questa opzione si apre un'altra finestra con la scelta di start/stop (leggere
la documentazione fornita con il pacchetto amule-hdd).

GESTIONE DNS:
Questo menu' e' presente solo se si e' installato il pacchetto ctdyn (di default si'), in
pratica serve per aggiornare il proprio DNS (tipo no-ip, dyndns ecc..).
Il programma e' configurabile da interfaccia grafica richiamabile da telecomando.
Comunque ho gia' inserito un file /etc/ctdyn.conf da modificare facilmente anche via ftp.

GESTIONE BACKUP:
In questa immagine le cose piu' "importanti" risiedono in /var/etc e' percio' consigliato
eseguire un backup anche giornaliero di questa directory.
Avviando questa opzione si apre un'altra finestra con la scelta del
"supporto di destinazione" CF USB HDD.
Di default e' impostato a /var/etc ma si puo' cambiare modificando il file /var/etc/SifTeam/backupdir,
oppure da interfaccia grafica richiamabile da telecomando.

INSTALLA ADDONS:
Compatibile con gli addons della GEMINI, basta copiare il file .tar.bz2 in /tmp
avviare questa opzione e dalla finestra che appare scegliere l'addons da installare.
Oppure installarli Online cliccando sul pulsante Online.

RIMUOVI ADDONS:
Avviare questa opzione e dalla finestra che appare scegliere l'addons da disinstallare.

CREA SWAP FILE:
Lo swap file altro non e' che della "memoria virtuale".
Dalla finestra che appare scegliere il "supporto di destinazione" CF USB HDD.
Si puo' impostare a 32MB marcando il checkbox.

VISUALIZZA FILE:
Avviare questa opzione e dalla finestra che appare scegliere il file da visualizzare,
di default e' impostato nella dir. /var/keys ma si puo' modificare da interfaccia
grafica richiamabile da telecomando.

GESTIONE FIREWALL:
Avviare questa opzione e dalla finestra che appare scegliere stop/star/restart del firewall, permettere
l'accesso alla sola rete LAN (marcando il checbox), aggiungere degli IP/NOMI_DOMINIO configurabile
da interfaccia grafica richiamabile da telecomando.

Tasto Giallo: (HDD)
Avviare questa opzione e dalla finestra che appare settare i propri valori.
E' possibile scegliere 2 opzioni HIGH e LOW
HIGH = acoustic 254 timeout 5 minuti
LOW = acoustic 128 timeout 2 minuti

Tasto Blu: (gestione e-m-u)
Questo gestisce gli e-m-u, gli emulatori servono per usare le proprie "c-a-r-d ORIGINALI".
Compatibile con i pacchetti e-m-u della GEMINI, ma si possono anche installare a mano:
copiare in /var/bin i file che lanceranno l'eseguibile, il file deve essere in
formato "nomeemu_cam.sh" (...importante "_cam.sh").
Il programma cerca tutti i file con il nome che termina per "_cam.sh" presenti in /var/bin
e li mette in lista, per avviare/fermare/riavviare/.
Quando si sceglie "avvia" il programma, oltre che avviare subito l' e-m-u, crea dei file
necessari per l'avvio automatico dell' e-m-u scelta, in modo che se si spegne il decoder al
prossimo riavvio si avra' l' e-m-u scelta avviata.

Tasto Verde: (script)
Questo gestisce degli script ( utility), che permettono di vedere a video delle utili
informazioni sul sistema, inoltre in questa schermata e' presente l'opzione di
"ONLINE UPGRADE", se utilizzata (ED ONLINE E' DISPONIBILE UN UPGRADE) esegue un
"UPGRADE" del Sistema, alla fine nella schermata di output si
avra' il resoconto dell'operazione di aggiornamento, se sono stati Upgradati i
pacchetti "Pannello - Enigma* - Skin Multiline e' necessario un reboot di Enigma o
del Dreambox.

WebInterface:
La WebIf ha ora un bottone in piu' "SifTeam Info", se premuto
aprira' una nuova pagina con altre opzioni.

================================================== =============

ATTENZIONE:
QUESTO FIRMWARE NON CONTIENE c*iavi, NE' EMULATORI, NE'
INDIRIZZI PER SCARICARE MATERIALE ILLEGALE DI NESSUN TIPO.
L'AUTORE NON E' RESPONSABILE IN NESSUN MODO DELL'USO CHE
GLI UTENTI NE FARANNO, DI LORO SPONTANEA VOLONTA'.

THIS FIRMWARE DOES NOT INCLUDE KEYS, NOR EMULATORS, NOR
URLS FOR DOWNLOADING ILLEGAL STUFFS OF ANY TYPE.
AUTHOR IS NOT RESPONSIBLE IN ANY WAY FOR WHAT
THE USERS WILL DO WITH THIS FIRMWARE.
 

Pattyren

VIP
Messages
1,885
SifTeam v.1.2.2 Dm 7000

SifTeam v.1.2.2 Dm 7000


Code:
Documentazione Ver. 1.2.2

SifTeam-1.2.2-dm7000 Immagine per FLASH / USB / HDD / CF
- Enigma 1.09 - CVS aggiornato al 01/02/2007
- FP Firmware 1.01
- busybox v1.01
- WebIf 5.9.7-Expert
- Tuxtxt v. 1.98
- Pmt.tmp presente
- with-webif=expert
- with-epg=private
- with-enigma-debug=yes
- with-reiserfs=yes
- with-flashtool=expert
- with-mhw_epg=yes

Per differenziarla dalla versione precedente, di default si ha lo skin "Army Matrix" -(grazie a Army)



Cambiamenti:

Aggiornato il cvs al 01-02-2007

Weekepg integrato nell'immagine e' compilato con il nuovo cvs -(grazie a maxZ4)



1)Aggiunto la possibilita' di personalizzare il bottone giallo nel blu-panel, tramite interfaccia si puo' assegnare l'esecuzione di un plugin al tasto e modificare il nome che si visualizzera' sul bottone.

2)Aggiunto la possibilita' di cambiare i nomi visualizzati sui bottoni degli script, in modo che se uno cambia lo script puo' (tramite interfaccia) cambiare il nome al bottone assegnato.

3)Modificato il pannello EMU e la gestione EMU

4)Modificato il pannello swap, ora si puo' annullare lo swap presente per poterne creare uno nuovo, si riesce a vedere le informazioni sullo swap: DIMENSIONE USATO LIBERO (thanks nokia9kCool

Problemi risolti: 7000/7020
Dal menu' "opzioni varie" non si riusciva a montare usb e cf
Dal menu' swap non si riusciva a creare lo swap nell'usb
Dal menu' "weekepg" in "opzioni varie" non si riusciva a eseguire il "Log ora"
Dal menu' EMU non si riusciva a riavviare l'emu attiva (bottone giallo)

Problemi risolti: 7000
Aggiunti i moduli necessari per il firewall e iptables nuova versione
E' ora possibile installarla in flash
Liberati in /var oltre 700kb


Istruzioni per l' utilizzo dell'immagine SIFTEAM per DM7000S

Opzioni in Blu Panel:
RESTART ENIGMA
OPZIONI VARIE
GESTIONE DNS
GESTIONE BACKUP
INSTALLA ADDONS
RIMUOVI ADDONS
CREA SWAPFILE
VEDI FILE
GESTIONE FIREWALL
Tasto Giallo (SETTABILE)
Tasto Blu (gestione emu)
Tasto Verde (script)

Restart Enigma:
Si riavvia l'interfaccia grafica ENIGMA
OPZIONI VARIE:
In questo menu' si puo':
Scegliere di avviare crond al boot
Scegliere di avviare samba al boot
Aggiungere un programma all'avvio: (ad esempio: per aggiungere in avvio il programma "pinco_pallino" si deve spuntare la checkbox e poi inserire nella linea sotto il comando pinco_pallino )
Montare i dischi, se presenti
Configurare l'autolog di weekepg
Avviare/Fermare aMule (se installato, di default no)
Configurare l'Hard Disk
Impostare l'azione (e il nome) del bottone giallo nel blu-panel
Cambiare i nomi degli script

Gestione Dns:
Questo menu' e' presente solo se si e' installato il pacchetto ctdyn (di default si'Wink, in
pratica serve per aggiornare il proprio DNS (tipo no-ip, dyndns ecc..).
Il programma e' configurabile da interfaccia grafica richiamabile da telecomando.
Comunque ho gia' inserito un file /etc/ctdyn.conf da modificare facilmente anche via ftp.

Gestione Backup:
In questa immagine le cose piu' "importanti" risiedono in /etc e' percio' consigliato
eseguire un backup anche giornaliero di questa directory.
Avviando questa opzione si apre un'altra finestra con la scelta del
"supporto di destinazione" CF USB HDD.
Di default e' impostato a /etc ma si puo' cambiare modificando il file /etc/SifTeam/tmp/backupdir,
oppure da interfaccia grafica richiamabile da telecomando.

Installa Addons:
Compatibile con gli addons della GEMINI, basta copiare il file .tar.bz2 in /tmp
avviare questa opzione e dalla finestra che appare scegliere l'addons da installare.
Oppure installarli Online cliccando sul pulsante Online.

Rimuovi Addons:
Avviare questa opzione e dalla finestra che appare scegliere l'addons da disinstallare.

Crea Swap File:
Lo swap file altro non e' che della "memoria virtuale" per il 7020 16mb sono piu' che
sufficienti.
Dalla finestra che appare scegliere il "supporto di destinazione" CF USB HDD.
Si puo' impostare a 32MB marcando il checkbox.
In basso a destra si puo' vedere lo stato della memoria swap, cosi' suddiviso:
Dimensione - Usata - Libera
SWAP: 0 0 0
SWAP: 16376 0 16376
..nel primo caso significa che non e' impostato un file di swap, nel secondo che il file di swap e' di 16MB 0MB usato 16MB a disposizione.

Visualizza File:
Avviare questa opzione e dalla finestra che appare scegliere il file da visualizzare, di default e'
impostato nella dir. /var/keys ma si puo' modificare il percorso editando il file
/etc/SifTeam/tmp/visualizzadir, e' anche configurabile da interfaccia grafica dal bottone Opzioni.

Gestione Firewall:
Avviare questa opzione e dalla finestra che appare scegliere stop/star/restart del firewall, permettere l'accesso alla sola rete LAN (marcando il checbox), aggiungere degli IP/NOMI_DOMINIO configurabile da interfaccia grafica dal bottone Opzioni.

Tasto Blu: (gestione emu)
Questo gestisce gli EMU, gli emulatori servono per usare le proprie "CARD ORIGINALI".
Compatibile con i pacchetti EMU della GEMINI, ma si possono anche installare a mano:
copiare in /var/bin i file che lanceranno l'eseguibile, il file deve essere in
formato "nomeemu_cam.sh" (...importante "_cam.sh"Wink.
Il programma cerca tutti i file con il nome che termina per "_cam.sh" presenti in /var/bin
e li mette in lista, per avviare/fermare/riavviare/.
Quando si sceglie "avvia" il programma, oltre che avviare subito l' EMU, crea dei file
necessari per l'avvio automatico dell' EMU scelta, in modo che se si spegne il decoder al
prossimo riavvio si avra' l' EMU scelta avviata.

Tasto Giallo: (settabile)
Questo bottone puo' essere associato ad un plugin a piacere.
Per impostarlo basta inserire nei campi che appaiono alla prima pressione del
tasto (oppure dal menu' 4 in Opzioni Varie) della password, del nome che dovra' apparire
nel bottone, del nome del plugin comprensivo dell'estensione .cfg (esempio:
pacman.cfg per far partire il plugin pacman), la lista dei plugin disponibili/installati si
trova in /var/tuxbox/plugins e /lib/tuxbox/plugins (7020 /usr/lib/tuxbox/plugins).

Tasto Verde: (script)
Questo gestisce degli script ( utility), che permettono di vedere a video delle utili
informazioni sul sistema, inoltre in questa schermata e' presente l'opzione di
"AGGIORNAMENTO SISTEMA",se utilizzata esegue un "UPGRADE" del Sistema (se presenti gli aggiornamenti Online), alla fine nella schermata di output si avra' il resoconto dell'operazione di aggiornamento, se sono stati Upgradati i pacchetti "Pannello - Enigma* - Skin Multiline e' necessario un reboot di Enigma o del Dreambox.
Alcuni utenti troveranno "molto" interessante lo script 8, che visualizza informazioni
sull'ECM corrente.

P.S.
E' possibile cambiare i nomi sulla lista dei bottoni da "Opzioni Varie -> 5"

WebInterface:
La WebIf ha ora un bottone in piu' "SifTeam Info", se premuto
aprira' una nuova pagina con altre opzioni.

EPG:
L'EPG di sistema e' stato sostituito con l'ottimo WEEKEPG (di MaxZ4)
premendo il tasto rosso percio' si avviera' weekepg.
La prima volta e' consigliato eseguire una "scansione" direttamente dal suo
setup, poi si potra' impostare un orario giornaliero di autolog
direttamente dal blupanel -> opzioni varie -> 1





Plugins, Addons, Giochi e Varie:

-lugins:-
DREAMFLASH
MOVIEPLAYER
NGRABSTART
NGRABSTOP
TUXCOM

-:Giochi:-
PACMAN
SNAKE
TETRIS

-:Skin aggiunti:-
Army Matrix
( Default all'avvio, ...utilizzabile picon 0.0.9 )



-:Lingue:-
Enigma = Tutte le disponibili
Blu Panel = Inglese- Lituano - Italiano

Ringraziamenti:

Ngc1927 :per lo sviluppo





Nokia9k8 :per i suoi test meticolosi

MaxZ4 :per il suo fantastico plug in week epg

Army :per averci dato la disponibilità ad usare le sue meravigliose skin

GeNgE :per il supporto e la pubblicazione

U_killer_bestia: per aver reso possibile lo sviluppo grazie al forum sif

ATTENZIONE:
QUESTO FIRMWARE NON CONTIENE CHIAVI, NE' EMULATORI, NE'
INDIRIZZI PER SCARICARE MATERIALE ILLEGALE DI NESSUN TIPO.
L'AUTORE NON E' RESPONSABILE IN NESSUN MODO DELL'USO CHE
GLI UTENTI NE FARANNO, DI LORO SPONTANEA VOLONTA'.

THIS FIRMWARE DOES NOT INCLUDE KEYS, NOR EMULATORS, NOR
URLS FOR DOWNLOADING ILLEGAL STUFFS OF ANY TYPE.
AUTHOR IS NOT RESPONSIBLE IN ANY WAY FOR WHAT
THE USERS WILL DO WITH THIS FIRMWARE.
 

Pattyren

VIP
Messages
1,885
SifTeam-1.3-dm7000

SifTeam-1.3-dm7000
Openvpn ready con plugin nel blu panel
(il 7000 necessita del programma da installare online)

SifTeam-1.3-dm7000

Immagine per FLASH / USB / HDD / CF

- Enigma 1.09 - CVS aggiornato al 28/03/2007
- FP Firmware 1.01
- busybox v1.01
- WebIf 6.0.2-Expert
- Tuxtxt v. 1.98
- Pmt.tmp presente
- with-webif=expert
- with-epg=private
- with-enigma-debug=yes
- with-reiserfs=yes
- with-flashtool=expert
- with-mhw_epg=yes


Plugins, Addons, Giochi e Varie:

-lugins aggiunti:-
CTDYN 1.96

-:Giochi:-
PAC
SNAKE
TETRIS

-lugins presenti:-
DREAMFLASH
MOVIEPLAYER
TELETEXT
TUXBOX COMMANDER
START/STOP NGRAB RECORD

-:Skin aggiunti:-
Dream_S_3.0 ( Default all'avvio, ...utilizzabile picon 0.9 )

-:Lingue:-
Enigma = Inglese - Italiano
Blu Panel = Inglese - Italiano

ATTENZIONE:
QUESTO FIRMWARE NON CONTIENE CHIAVI, NE' EMULATORI, NE'
INDIRIZZI PER SCARICARE MATERIALE ILLEGALE DI NESSUN TIPO.
L'AUTORE NON E' RESPONSABILE IN NESSUN MODO DELL'USO CHE
GLI UTENTI NE FARANNO, DI LORO SPONTANEA VOLONTA'.

THIS FIRMWARE DOES NOT INCLUDE KEYS, NOR EMULATORS, NOR
URLS FOR DOWNLOADING ILLEGAL STUFFS OF ANY TYPE.
AUTHOR IS NOT RESPONSIBLE IN ANY WAY FOR WHAT
THE USERS WILL DO WITH THIS FIRMWARE.
 
Last edited by a moderator:

aitchala

VIP
Messages
1,394
SifTeam v.1.8.1 DM 7000 img

SifTeam v.1.8.1 DM 7000 img

Usable to USB, CF or flash
* Enigma of: 13.07.2007
* Linux version 2.6.9
* GCC 3.4.4 Original CVS 1.1.0
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99
 
Last edited by a moderator:

ggiuseppe

Registered User
Messages
1,728
SifTeam v.1.8.2

SifTeam v.1.8.2 - 07/09/2007
DB500:
--------
Usable to flash
* Enigma of: 29.08.2007
* Linux version 2.6.9
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99
DB7000:
---------
Usable to USB, CF or flash
* Enigma of: 29.08.2007
* Linux version 2.6.9
* GCC 3.4.4 Original CVS 1.1.0
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99
DB7020:
---------
* Usable to USB, CF or flash
* Enigma of: 29.08.2007
* OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [5f0748b962e87919f7165d5671690572c9b073af]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm7020"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
******************************************************
DB7000 and DB7020 :
---------------------------------------
Buttons:
----------
* BLUE - Blu-Panel
* 2x BLUE - Emu-Panel
* YELLOW - Plugins
* BLUE - YELLOW > Addons
* BLUE - GREEN > Scripts
* RED - WEEKEPG (thanks to MaxZ4)
* GREEN - subservices
*
Features:
----------
* Advanced FIREWALL with graphics start/stop/configuration
* Advanced SWAP file configuration, you can set swap in USB, CF or HDD (16mb or 32 mb)
* Advanced DNS with graphics start/stop/configuration
* Advanced FILES visualizations
* Advanced BACKUP with graphics start/stop/configuration
* Set CROND start at any boot
* Set SAMBA start at any boot (7000 have to install samba-plugin)
* Advanced WEEKEPG options ( ...if you want use standard, set to blu-panel->options->weekepg )
* Automount HDD USB CF
* Advanced HDD ..set sleep and acoustic options
* Advanced SCRIPT options for personal set
* Advanced OpenVpn with graphics start/stop/configuration
* Advanced AMULE with graphics start/stop
* Advanced TORRENT with graphics start/stop/configuration (thanks to MaxZ4)
* Set personal AUTOSTART program*Display Function:
-------------------
* Set zap without OSD (if press OK return OSD)
* Set OSD always on when OK is pressed (required from nokia9k8)
* Display Snr, Agc, Ber
* Display video information
* Display frequency, polarization, symbol rate
* Display emu in use
* Display service providers name
* Display CaID, ProvID, PID (you can hide from options)
* Display Decoding Source (you can hide from options)
* Display long date format* Picon, already inserted to enigma code (thanks to jlmota)* SkinPreview (thanks to jlmota)
*
EMU:
------
* Set Default CAM
* Set channel CAM
* Set provider CAM
* Stop active CAM
* Set off/on and houres/minutes for autorestart CAM
*
Addons:
---------
* Internet addons download
* Manual addons install
* Remove installed addons
*
Misc:
------
* Italian, English language
* Many language in download
* Skin default - adtech* Picon is already installed (DB7000 have only default.png)
* Several Plugins/Games/Addons installed
**************************************************
DB500 :
-----------------------------------------
Buttons:
----------
* BLUE - Blu-Panel
* 2x BLUE - Emu-Panel
* YELLOW - Plugins
* BLUE - YELLOW > Addons
* BLUE - GREEN > Scripts
* RED - EPG
* GREEN - subservices
*
Features:
----------
* Advanced DNS with graphics start/stop/configuration
* Advanced FILES visualizations
* Set SAMBA start at any boot (have to install samba-plugin)
* Advanced SCRIPT options for personal set
* Advanced OpenVpn with graphics start/stop/configuration
* Set personal AUTOSTART program
* Change Remote Control driver ...set 500 or 7000
*
Display Function:
-------------------
* Set zap without OSD (only DB500)
* Set OSD always on when OK is pressed (only DB500)
* Display Snr, Agc, Ber
* Display video info
* Display frequency, polarization, symbol rate
* Display emu in use
* Display service providers name
* Display CaID, ProvID, PID (you can hide from options)
* Display Decoding Source (you can hide from options)
* Display long date format* Picon, already inserted to enigma code (thanks to jlmota)* SkinPreview (thanks to jlmota)*
EMU:
------
* Set Default CAM
* Set channel CAM
* Set provider CAM
* Stop active CAM
* Set off/on and houres/minutes for autorestart CAM
*
Addons:
---------
* Internet addons download
* Manual addons install
* Remove installed addons
*
Misc:
------
* Italian, English language
* Many language in download
* Skin default - adtech
* Picon is already installed (DB7000 have only default.png)
**************************************************
IPBOX200S:
------------------Buttons:
----------
* BLUE - Blu-Panel
* 2x BLUE - Emu-Panel* YELLOW - Plugins
* BLUE - YELLOW > Addons
* BLUE - GREEN > Scripts
* RED - EPG
* GREEN - subservices
*
Features:
----------
* Advanced DNS with graphics start/stop/configuration
* Advanced FILES visualizations
* Set SAMBA start at any boot (have to install samba-plugin)
* Advanced SCRIPT options for personal set
* Advanced OpenVpn with graphics start/stop/configuration
* Set personal AUTOSTART program
* Change Remote Control driver ...set 500 or 7000
*
Display Function:
-------------------
* Set zap without OSD (only DB500)
* Set OSD always on when OK is pressed (only DB500)
* Display Snr, Agc, Ber
* Display video info
* Display frequency, polarization, symbol rate
* Display emu in use
* Display service providers name
* Display CaID, ProvID, PID (you can hide from options)
* Display Decoding Source (you can hide from options)
* Display long date format* Picon, already inserted to enigma code (thanks to jlmota)* SkinPreview (thanks to jlmota)
*
EMU:
------
* Set Default CAM
* Set channel CAM
* Set provider CAM
* Stop active CAM
* Set off/on and houres/minutes for autorestart CAM
*
Addons:
---------
* Internet addons download
* Manual addons install
* Remove installed addons
*
Misc:
------
* Italian, English language
* Many language in download
* Skin default adtech
* Picon is already installed
* IPBOX200S have UHF in/out
* IPBOX200S ...after installed image ...have to set mID to 5620
* IPBOX200S ...for free memory (if is necessary):
1) Go to free channel
2) Restart enigma
3) Click to "Free Memory"
...now is possible to start/stop install/remove visualize script ecc..
********************************************************
 
Last edited by a moderator:
C

costa46

SifTeam 1.8.4 dm7000

DB7000:
---------
Usable to HDD, USB, CF or flash
* Enigma of: 04.10.2007
* Linux version 2.6.9
* GCC 3.4.4 Original CVS 1.1.0
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99




******************************************************



ALL DECODER ( some options not present to IPBOX200s - DM500 - DM5620 ):
Buttons:
----------
* BLUE - Blu-Panel
* BLUE > 1 sec. ..start plugin called BlueRelease (you rename another if want)
* 2x BLUE - Emu-Panel
* YELLOW - Plugins
* BLUE - YELLOW > Addons
* BLUE - GREEN > Scripts
* RED - WEEKEPG (thanks to MaxZ4)
* GREEN - subservices
*

Features:
----------
* Advanced FIREWALL with graphics start/stop/configuration
* Advanced SWAP file configuration, you can set swap in USB, CF or HDD (16mb or 32 mb)
* Advanced DNS with graphics start/stop/configuration
* Advanced FILES visualizations
* Advanced BACKUP with graphics start/stop/configuration
* Set CROND start at any boot
* Advanced crond system
* Set SAMBA start at any boot (7000 have to install samba-plugin)
* Advanced WEEKEPG options ( ...if you want use standard, set to blu-panel->options->weekepg )
* Automount HDD USB CF
* Advanced HDD ..set sleep and acoustic options
* Advanced SCRIPT options for personal set
* Advanced OpenVpn with graphics start/stop/configuration
* Advanced AMULE with graphics start/stop
* Advanced TORRENT with graphics start/stop/configuration (thanks to MaxZ4)
* Set personal AUTOSTART program
* Color set to RGB from default ( for lcd TV)
* Simple Set directory for picon and part of /var (bin and tuxbox, moved where you want)

Display Function:
-------------------
* Set zap without OSD (if press OK return OSD)
* Set OSD always on when OK is pressed (required from nokia9k8)
* Display Snr, Agc, Ber
* Display video information
* Display frequency, polarization, symbol rate
* Display emu in use
* Display service providers name
* Display CaID, ProvID, PID (you can hide from options)
* Display Decoding Source (you can hide from options)
* Display long date format
* Picon, already inserted to enigma code (thanks to jlmota)
* SkinPreview (thanks to jlmota)
*

EMU:
------
* Set Default CAM
* Set channel CAM
* Set provider CAM
* Stop active CAM
* Set off/on and houres/minutes for autorestart CAM
*

Addons:
---------
* Internet addons download
* Manual addons install
* Remove installed addons
*


Misc:
------
* Italian, English language
* Many language in download
* Skin default - tux ...from porto
* Picon is already installed (DB7000, IPBOX250, IPBOX350 ..have only default.png)
* Several Plugins/Games/Addons installed
* IPBOX250S IPBOX350S ...have to set mID 7000
* IPBOX200S ...autoset mID
* IPBOX200S have UHF in/out
* IPBOX200S ...for free memory (if is necessary):
1) Go to free channel
2) Restart enigma
3) Click to "Free Memory"
...now is possible to start/stop install/remove visualize script ecc..
********************************************************


THANKS TO:
--------------
DB500 > frog68.
DB7000 > ngc1927, MaxZ4.
DB7020 > ngc1927.
IPBOX200S > ngc1927.
IPBOX250S > astemio.
IPBOX350S > ngc1927, genge, voodo3
All IPBOX > ..special thanks to sandali for its branch of development ..and at Blakskettle for info and help.
FOR ALL > jlmota, porto, JoeBlack® ...and other?


VARIOUS:
-----------
This image is based, beyond that my "much" code and hard work, to Dream-cvs, parts of old Hydra
source (EMU/ADDONS ...emubroker is this) to little EasyEmu parts ...and other?


ATTENZIONE:
QUESTO FIRMWARE NON CONTIENE CHIAVI, NE' EMULATORI, NE'
INDIRIZZI PER SCARICARE MATERIALE ILLEGALE DI NESSUN TIPO.
L'AUTORE NON E' RESPONSABILE IN NESSUN MODO DELL'USO CHE
GLI UTENTI NE FARANNO, DI LORO SPONTANEA VOLONTA'.

THIS FIRMWARE DOES NOT INCLUDE KEYS, NOR EMULATORS, NOR
URLS FOR DOWNLOADING ILLEGAL STUFFS OF ANY TYPE.
AUTHOR IS NOT RESPONSIBLE IN ANY WAY FOR WHAT
THE USERS WILL DO WITH THIS FIRMWARE.
 
Last edited by a moderator:

Acech

Registered
Messages
678
SifTeam_1.8.5_7000_BU

SifTeam_1.8.5_7000_BU 23.11.07


Backup für DB 7000 Stick,HDD,CF

Ein fertiges Backup für die jenigen,die sich die Arbeit mit der Zusammenstellung ersparen wollen.

Bitte mit Flashwizard installieren.

Cam's :

camd3893
mgcamd1.25 TPS AU
evocamd2.17
CCcam2.0.4
Newcs 1.50

Einige Plugins-TuxBox commander,Tuxwetter
Alle Sprachen zur Auswahl
Einige Spiele
DBC-Satan-k*ysupdater(Neue Version)Online Update neuster K**s

FloriDream v1.0 online-kyupdater
 
Last edited by a moderator:

vegeku90

Registered
Messages
1,586
SifTeam 1.8.5.1 Dreambox 7000

News relative all'immagine 1.8.5.1
-------------------------------------

CAMBIAMENTI ATTUALI:
--------------------

1) Aggiornato libreria libc.so.6 per problemi vari (il dm500 ora ha la sua personale)
2) Creato link per localizzazione in /var/share/locale
3) Tolto openvpn da tutti (in modo di avere un solo pacchetto openvpn)
4) Cambiato i picon con quelli di vhannibal (risparmia spazio e ci sono tutti i canali italia+sky) ..con i picon precedenti non bastava lo spazio per compilare.
5)* Aggiunto il pulsante formatta usb nella sezione HDD-USB ( SPERIMENTALE - ma funziona )
6) Aggiornato il cvs al 17-12-2007
7) Invertito i colori, blu e giallo, dei bottoni "stop cam" e "set extra" in "pannello emu" (in caso di cam incartata non si riesce a entrare nella gestione emu, ..parte di continuo stop emu)
8) Svuotato lo script00.sh ...uno se lo puo' personalizzare, e ormai non serviva piu' il contenuto
9) Aggiunto sviluppo immagine per ipbox400(presto online)
10) Aggiunto immagine per DM500PLUS
11) tolto il supporto ipkgpl (plugin) dalle immagini: dm500plus - dm600pvr - dm7020 (ormai usano tutti il blu-panel e i pacchetti .tar.gz)
12) Aggiunto l'eseguibile "awk" (link di busybox) nelle immagini dei 200-250-350-400-500-5620-7000
13) Sistemato ecm_info e netcard_info con i resoconti delle emu con card
14) Modificati timer.cpp ...ora se si usa weekepg, l'epg di base non si crea la propria cache.
15) Modificato patch per ipbox, ora nel timer l'opzione di default e' "recDVR"
16) Nazionalizzato weekepg e gestione backup/firmware




IPBOX200S:
-------------
Usable to flash
* Enigma of: 17.12.2007 (patched for native version)
* Linux version 2.6.17 (patched from sandali)
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* U-BOOT 1.2.0 (patched from sandali)
* New driver from sandali
* Auto SET mID

IPBOX250S:
---------
Usable to HDD (CF) or flash
* Enigma of: 17.12.2007 (patched for native version)
* Linux version 2.6.17 (patched from sandali)
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* U-BOOT 1.2.0 (patched from sandali)
* Tuxtxt v. 1.99
* New driver from sandali
* Have to SET mID 25

IPBOX350S:
---------
Usable to HDD, USB or flash
* Enigma of: 17.12.2007 (patched for native version)
* Linux version 2.6.17 (patched from sandali)
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* U-BOOT 1.2.0 (patched from sandali)
* Tuxtxt v. 1.99
* New driver from sandali
* Have to SET mID 26

IPBOX400S:
---------
Usable to HDD or flash
* Enigma of: 17.12.2007 (patched for native version)
* Linux version 2.6.17 (patched from sandali)
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* U-BOOT 1.2.0 (patched from sandali)
* Tuxtxt v. 1.99
* New driver from sandali
* Have to SET mID 40

DB500:
--------
Usable to flash
* Enigma of: 17.12.2007
* Linux version 2.6.9
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99

DB5620:
--------
Usable to flash
* Enigma of: 17.12.2007
* Linux version 2.6.9
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99

DB7000:
---------
Usable to HDD, USB, CF or flash
* Enigma of: 17.12.2007
* Linux version 2.6.9
* GCC 3.4.4 Original CVS 1.1.0
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99

DB7020:
---------
* Usable to HDD, USB, CF or flash
* Enigma of: 17.12.2007
* OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [460f9823f9764f1a1a9beccd73ba4d7dfaa19804]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm7020"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"

DB600PVR:
---------
* Usable to HDD or flash
* Enigma of: 17.12.2007
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [460f9823f9764f1a1a9beccd73ba4d7dfaa19804]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm600pvr"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
************************************************** ****

DB500PLUS:
---------
* Usable to flash
* Enigma of: 17.12.2007
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [460f9823f9764f1a1a9beccd73ba4d7dfaa19804]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm500plus"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
************************************************** ****


ALL DECODER ( same options not present to IPBOX200s - DM500 - DM500+ - DM5620 ):
Buttons:
----------
* BLUE - Blue-Panel
* 2x BLUE - Emu-Panel
* YELLOW - Plugins
* YELLOW > 1 sec. ..start plugin called sifteam (rename any plugin you want use with this option)
* BLUE - YELLOW > Addons
* BLUE - GREEN > Scripts
* RED - WEEKEPG (thanks to MaxZ4)
* GREEN - subservices
*

Features:
----------
* Advanced FIREWALL with graphics start/stop/configuration
* Advanced SWAP file configuration, you can set swap in USB, CF or HDD (16mb or 32 mb)
* Advanced DNS with graphics start/stop/configuration
* Advanced FILES visualizations
* Advanced BACKUP with graphics start/stop/configuration
* Set CROND start at any boot
* Advanced crond system configuration
* Set SAMBA start at any boot (7000 have to install samba-plugin)
* Advanced WEEKEPG options ( ...if you want use standard, set to blue-panel->options->weekepg )
* Automount HDD USB CF
* Advanced HDD ..set sleep and acoustic options
* Advanced SCRIPT options for personal set
* Advanced OpenVpn with graphics start/stop/configuration
* Advanced AMULE with graphics start/stop
* Advanced TORRENT with graphics start/stop/configuration (thanks to MaxZ4)
* Set personal AUTOSTART program
* Color set to RGB from default ( for lcd TV)
* Simple Set directory for picon
* Inserted DM7020 Network Fix

Display Function:
-------------------
From 1.8.5 more of this information is settable from Menu-Advanced..
* Set zap without OSD (if press OK return OSD)
* Set OSD always on when OK is pressed (required from nokia9k8)
* Display Snr, Agc, Ber
* Display video information
* Display frequency, polarization, symbol rate
* Display emu in use
* Display service providers name
* Display CaID, ProvID, PID (you can hide from options)
* Display Decoding Source (you can hide from options)
* Display long date format
* Picon, already inserted to enigma code (thanks to jlmota)
* SkinPreview (thanks to jlmota)
* Skin Lite/Full, when Lite ..if no OSD present, and press OK see Full (thanks to tension for help)
* skin by porto for Dreambox
* skin by porto for Ipbox


EMU:
------
* Set Default CAM
* Set channel CAM
* Set provider CAM
* Stop active CAM
* Set off/on and hours/minutes for autorestart CAM
*

Addons:
---------
* Internet addons download
* Manual addons install
* Remove installed addons
*


Misc:
------
* Italian, English language
* Many language in download
* Skin default - porto
* Picon for -skyit+italian channel- is already installed
* Several Plugins/Games/Addons installed
* IPBOX250S ...autoset mID
* IPBOX350S ...autoset mID
* IPBOX200S ...autoset mID
* IPBOX200S have UHF in/out
* IPBOX200S ...for free memory (if is necessary):
1) Go to free channel
2) Click to "Free Memory"
...now is possible to start/stop install/remove visualize script ecc..
************************************************** ******


THANKS TO:
--------------
DM500 > frog68
DM500+ >
DM600 > neri73
DM7000 > MaxZ4, adamo49, ngc1927
DM5620 >
DM7020 > ngc1927
IPBOX200S > ngc1927, genge
IPBOX250S > astemio, neri73
IPBOX350S > ngc1927, genge, voodo3
IPBOX400S > blakskettle
All IPBOX > ..special thanks to sandali for its branch of development ..and Blakskettle for any info.
FOR ALL > porto, jlmota, MaxZ4, adga ...and other?

Thanks to all and good fun
************************************************** ******


VARIOUS:
-----------
This image is based, beyond that my "much" code and hard work, to Dream-cvs, parts of old Hydra
source (EMU/ADDONS ...emubroker is this) ...and other?
************************************************** ******



************************************************** ****************
ATTENZIONE:
QUESTO FIRMWARE NON CONTIENE CHIAVI, NE' EMULATORI, NE'
INDIRIZZI PER SCARICARE MATERIALE ILLEGALE DI NESSUN TIPO.
L'AUTORE NON E' RESPONSABILE IN NESSUN MODO DELL'USO CHE
GLI UTENTI NE FARANNO, DI LORO SPONTANEA VOLONTA'.

THIS FIRMWARE DOES NOT INCLUDE KEYS, NOR EMULATORS, NOR
URLS FOR DOWNLOADING ILLEGAL STUFFS OF ANY TYPE.
AUTHOR IS NOT RESPONSIBLE IN ANY WAY FOR WHAT
THE USERS WILL DO WITH THIS FIRMWARE.
************************************************** ****************
 
Last edited:

Demolition

Registered
Messages
203
SifTeam-1.8.5.2B3 7000

SifTeam-1.8.5.2B3 7000


Relativo all'immagine 1.8.5.2
-------------------------------------

CAMBIAMENTI ATTUALI:
--------------------

1) Sistemato openvpn (tolto diverse parti rimaste nei 7020-600pvr-500plus)
2) Sistemato ancora openvpn (ora compare nel pannello dei 500-5620-200)
3) Aggiunto il controllo dei dischi nel 250 (se uno ha sia CF che HDD monta master la CF e slave l'HDD, questo
sistema e' stato riportato come migliore ed e' il piu' usato)
4) Aggiunto le opzioni per DMA e 32bit dei dischi, nel file di avvio.
5) Aggiunto l'opzione "Always 16:9" nelle immagini IPBOX
6) Modificato la variabile che visualizza la frequenza (osd), ora compare subito
7) Sistemato un BUG nella gestione xml ..ora tutti i plugin che usano xml non crashano enigma
(tipo rss, wheather, ecc.. )
8) Aggiornato il cvs al 01.01.2008




********************* LEGGERE ATTENTAMENTE PRIMA DI UPGRADARE L'IMMAGINE *********************
********************************* READ BEFORE UPGRADE IMAGE **********************************

NOTE:
------

INFO PER UPGRADE DALLA VERSIONE 1.8.5.1 - INFO FOR UPGRADE FROM 1.8.5.1
-----------------------------------------------------------------------

1) Il file /var/etc/rcS.d/S70user_start.sh e' diventato /var/etc/rcS.d/S99user_start.sh
quindi in caso si voglia riutilizzare la vecchia /var spostata e' necessario rinominarlo.

File /var/etc/rcS.d/S70user_start.sh is now called /var/etc/rcS.d/S99user_start.sh
if you want use old moved /var ..please rename it


2) Se si usa lo skin di default seguire le istruzioni sotto:
If use default skin ..please read instruction:

Ora lo skin DI DEFAULT e' cambiato in HappyNewYear, quindi se si vuol usare la /var spostata c'e' bisogno di
modificare il file /var/tuxbox/config/enigma/config
cambiare la stringa da:
s:/ezap/ui/skin=/share/tuxbox/enigma/skins/xmas.esml
in:
s:/ezap/ui/skin=/share/tuxbox/enigma/skins/happy.esml
e poi upgradare l'immagine.

Default skin is changed to HappyNewYear, if you want use old moved /var have:
modify file /var/tuxbox/config/enigma/config
from:
s:/ezap/ui/skin=/share/tuxbox/enigma/skins/xmas.esml
to
s:/ezap/ui/skin=/share/tuxbox/enigma/skins/happy.esml


INFO PER UPGRADE DALLA VERSIONE 1.8.5.2bETA2 - INFO FOR UPGRADE FROM 1.8.5.2bETA2
---------------------------------------------------------------------------------

1) Per chi usa la /var spostata, il plugin weekepg deve essere aggiornato, scaricabile
da online tramite blu-panel.
Il nuovo cvs del 01.01.2008 con cui e' compilata la B3 non e' compatibile con il
cvs del 16.12.2007 con cui e' compilato weekepg comprese nelle immagini precedenti.

If use moved /var ..please upgrade from online package weekepg, new cvs enigma i use for
compile B3 not is compatible with cvs is compiled weekepg from old image.
 
Last edited by a moderator:

vegeku90

Registered
Messages
1,586
SifTeam 1.8.6 [DM7000]

SifTeam 1.8.6 [DM 500-500plus-5620-600pvr-70*0]


Coder: ngc1927
--------------
Aiutanti: porto - frog68 - MaxZ4 - jlmota
-----------------------------------------
Betatester: genge - astemio - neri73 - voodo3 - theseven - biondo79 - superfly - getdownup

Changelog Relativo all'immagine 1.8.6
----------------------------


1) Sistemato openvpn (tolto diverse parti rimaste nei 7020-600pvr-500plus)
2) Sistemato ancora openvpn (ora compare nel pannello dei 500-5620-200)
3) Aggiunto il controllo dei dischi nel 250 (se uno ha, sia CF che HDD, monta master la CF e slave l'HDD, questo
sistema e' stato riportato come migliore ed e' il piu' usato)
4) Aggiunto le opzioni per DMA e 32bit dei dischi, nel file di avvio.
5) Aggiunto l'opzione "Always 16:9" nelle immagini IPBOX
6) Modificato la variabile che visualizza la frequenza (osd), ora compare subito
7) Sistemato un BUG nella gestione xml ..ora tutti i plugin che usano xml non crashano enigma
(tipo rss, wheather, ecc.. )
8) Modificati script per stop_emu e restart_emu
9) Fix riavvio emu e autoriavvio openvpn (7020 - 500plus - 600pvr)
10) Fix vari per crond
11) Aggiunto start-stop-daemon (busybox link)
12) Inserito minicron e creato interfaccia per usarlo, con diversi script gia' inseriti da poter usare
13) Compilato immagine per 200s con 64mb
14) Adattate le immagini al dropbear(ssh)
15) Aggiornato il cvs al 20.01.2008 (tuxbox-plugins e tuxbox-plugins-enigma sono del 01-01-2008, i nuovi non
compilano con le ultime patch inserite dalla Dream)
16) Modificato il pannello (Opzioni Varie) - tolto amule e torrent (..aggiornato i pacchetti amule e torrent
con i relativi plugins) ..e inserito dropbearSSH
17) Fixato weekepg (grazie MaxZ4 ) ..e tutto il necessario per lui.
18) Aggiunto il PATH /var/sbin in /var/etc/profile
19) Nuovo libc.so.6 con supporto ssh
20) Inserito libutil.so.1 e libnsl.so.1 in /lib
21) Finito il supporto a ssh e sftp.
22) Aggiunto /bin/prockill
23) Aggiunto telnet (link busybox) e relativa nuova libc.so.6
24) Cambiato i loghi e skin a tutte le immagini
25) Ancora una sistemata per formattare/montare usb da blu-panel
26) Unificato url download addons


********************* LEGGERE ATTENTAMENTE PRIMA DI UPGRADARE L'IMMAGINE *********************
********************************* READ BEFORE UPGRADE IMAGE **********************************

NOTE:
------

INFO PER UPGRADE DALLA VERSIONE 1.8.5.1 - INFO FOR UPGRADE FROM 1.8.6 WITH MOVED /VAR (Valid only for dreambox7000)
-------------------------------------------------------------------------------------

Questa versione contiene molti cambiamenti, se non si vuol ricreare da 0 la /var, usare questo sistema.
Installare, ..muovere la /var, ..entrare nel ricevitore con un client ftp (o da telnet), ..copiare tutto il contenuto
di /var_init/ in /var (se richiesto confermare la sovrascrittura).

This version have very much change, if not want recreate from 0 your /var, use this system.
Install, ..move /var, ..go to receiver from ftp client (or telnet), ..copy all from /var_init to /var (if
request conferm overwrite).


Se si usa lo skin di default seguire le istruzioni sotto:
If use default skin ..please read instruction:

Ora lo skin DI DEFAULT e' cambiato in golden, quindi se si vuol usare la /var spostata c'e' bisogno di
modificare il file /var/tuxbox/config/enigma/config
cambiare la stringa da:
s:/ezap/ui/skin=/share/tuxbox/enigma/skins/xmas.esml
in:
s:/ezap/ui/skin=/share/tuxbox/enigma/skins/golden.esml
e poi upgradare l'immagine.

Default skin is changed to golden, if you want use old moved /var have:
modify file /var/tuxbox/config/enigma/config
from:
s:/ezap/ui/skin=/share/tuxbox/enigma/skins/xmas.esml
to
s:/ezap/ui/skin=/share/tuxbox/enigma/skins/golden.esml





DB500:
--------
Usable to flash
* Enigma of: 20.01.2008
* Linux version 2.6.9
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99

DB5620:
--------
Usable to flash
* Enigma of: 20.01.2008
* Linux version 2.6.9
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99

DB7000:
---------
Usable to HDD, USB, CF or flash
* Enigma of: 20.01.2008
* Linux version 2.6.9
* GCC 3.4.4 Original CVS 1.1.0
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99

DB7020:
---------
* Usable to HDD, USB, CF or flash
* Enigma of: 20.01.2008
* OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [6280190b0115512a1928c502dbc16f78b46fcf6f]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm7020"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"

DB600PVR:
---------
* Usable to HDD or flash
* Enigma of: 20.01.2008
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [6280190b0115512a1928c502dbc16f78b46fcf6f]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm600pvr"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
************************************************** ****

DB500PLUS:
---------
* Usable to flash
* Enigma of: 20.01.2008
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [6280190b0115512a1928c502dbc16f78b46fcf6f]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm500plus"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
************************************************** ****


ALL DECODER ( same options not present to IPBOX200s - DM500 - DM500+ - DM5620 ):
Buttons:
----------
* BLUE - Blue-Panel
* 2x BLUE - Emu-Panel
* YELLOW - Plugins
* YELLOW > 1 sec. ..start plugin (sifteam.cfg sifteam.so, rename any plugin you want use with this option)
* BLUE - YELLOW > Addons
* BLUE - GREEN > Scripts
* RED - WEEKEPG (thanks to MaxZ4)
* GREEN - subservices
*

Features:
----------
* Advanced FIREWALL with graphics start/stop/configuration
* Advanced SWAP file configuration, you can set swap in USB, CF or HDD (16mb or 32 mb)
* Advanced DNS with graphics start/stop/configuration
* Advanced FILES visualizations
* Advanced BACKUP with graphics start/stop/configuration
* Set MINICROND start at any reboot
* Advanced MINICROND system configuration, with more script added (restart cam, restart openvpn ecc..)
* Set SAMBA start at any boot (have to install package)
* Advanced WEEKEPG options ( ..if you want use standard, set to blue-panel->options->weekepg )
(for now log is not possible ..only, option is visible ..for possible future changes)
* Automount HDD USB CF
* Advanced HDD ..set sleep and acoustic options
* Formatting USB (to HDD option)
* Advanced SCRIPT options for personal set
* Advanced OPENVPN with graphics start/stop/configuration (have to install package)
* OPENSSH support (have to install package)
* Advanced DROPBEARSSH with graphics start/stop/configuration (have to install package)
* Color set to RGB from default ( for lcd TV)
* Simple Set directory for picon
* Inserted DM7020 Network Fix
* Reiserfs and Fat32 supported

Display Function:
-------------------
From 1.8.5 more of this information is settable from Menu-Advanced..
* Set zap without OSD (if press OK return OSD)
* Set OSD always on when OK is pressed (required from nokia9k8)
* Display Snr, Agc, Ber
* Display video information
* Display frequency, polarization, symbol rate
* Display emu in use
* Display service providers name
* Display CaID, ProvID, PID (you can hide from options)
* Display Decoding Source (you can hide from options)
* Display long date format
* Picon, already inserted to enigma code (thanks to jlmota)
* SkinPreview (thanks to jlmota)
* Skin Lite/Full, when Lite ..if no OSD present, and press OK see Full (thanks to tension for help)
* skin by porto for Dreambox
* skin by porto for Ipbox


EMU:
------
* Set Default CAM
* Set channel CAM
* Set provider CAM
* Stop active CAM
*

Addons:
---------
* Internet addons download
* Manual addons install
* Remove installed addons
*


Misc:
------
* Italian, English language
* Many language in download
* Skin default - porto
* Picon for -skyit+italian channel- is already installed
* Several Plugins/Games/Addons installed
* IPBOX200S have UHF in/out
* IPBOX200S ...for free memory (if is necessary):
1) Go to free channel
2) Click to "Free Memory"
...now is possible to start/stop install/remove visualize script ecc..
************************************************** ******


THANKS TO:
--------------
DM500 > frog68
DM500+ >
DM600 > neri73
DM7000 > ngc1927
DM5620 > Maxz4
DM7020 > ngc1927
IPBOX200S > genge
IPBOX200S 64mb > Cupidz,pog
IPBOX250S > astemio, neri73,biondo79
IPBOX350S > ngc1927, genge, voodo3,getdownup,superfly
IPBOX400S > voodo3,
All IPBOX > ..special thanks to sandali for its branch of development ..and Blakskettle for any info.
FOR ALL > porto, jlmota, MaxZ4,frog68,astemio for hard work
Special thanks to UKiller Bestia and all sifteam people
Thanks to all and good fun
************************************************** ******
 

vegeku90

Registered
Messages
1,586
SifTeam 1.8.8 [Dm500-500plus-600pvr-70x0-56x0]

logosif.jpg






Changelog relativo all'immagine 1.8.8
-----------------------------

Coder: ngc1927
--------------
Aiutanti: porto - frog68 - MaxZ4 - jlmota
-----------------------------------------
Betatester:

genge = 350 - 200

astemio = 250 - dm7020

frog68 = dm500

neri73 = dm7000S

voodo3 = 400

theseven = dm500s - dm7020s

black33 = dm600pvr

biondo79 = 250s - DM500s - DM600PVR

imasna = dm600pvr

piefav = dm7020

-----------------------------------------------------------------------------


CAMBIAMENTI:
------------
1) Riscritto oltre la ****' del codice, e aggiunto altrettanto di nuovo
2) Aggiornato il cvs al 25.02.2008
3) Tolto weekepg come EPG di default (si installa il preferito poi si imposta dal pannello di controllo)
4) Gli openembedded hanno il samba (3.0) installato, gli altri no' (openembedded= 7020 - 600pvr - 500plus)


NOTE:
-----

1 click bottone blu = pannello EMU
1 click bottone giallo = plugins
1 click bottone verde = pannello ADDONS
1 click bottone rosso = EPG personale impostabile da pannello di controllo

bottone blu premuto + di 1 secondo = pannello di controllo
bottone giallo premuto + di 1 secondo = plugins personale impostabile da pannello di controllo
bottone verde premuto + di 1 secondo = plugins personale impostabile da pannello di controllo
bottone rosso premuto + di 1 secondo = niente ..e quante robe vuoi?
(..non si puo' impostare, se uno usa l'epg base serve per selezionare la visualizzazione dell'epg)

Pannello di controllo in modo "visuale" (ad icone)

Pannello EMU mostra l'icona di una card che varia se il canale e' decodificato da:
CARD
EMU
NETWORK

Alcuni pacchetti sono cambiati (si trovano dentro ADDONS)

:thum:
 

marce

VIP
Messages
7,115
Sifteam 1.8.8.1 dm7000

Sifteam 1.8.8.1 dm7000

Related to the image 1.8.8.1

CHANGES:
------------
1) adds the option for settare the green button as subservice (if pressed + of 1 according to)
2) correct Openvpn (riscritto completely the scirpt)
3) correct minicron (it didn't save the fifth option)
4) adds the option "to Syncronize the online date" (In Expert Menu')

Usable to HDD, USB, CF or flash
* Enigma of: 25.02.2008
* Linux version 2.6.9
* GCC 3.4.4 Original CVS 1.1.0
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99
 
Last edited:

marce

VIP
Messages
7,115
SifTeam 1.8.8.1 DM7000 BU

SifTeam 1.8.8.1 DM7000 BU 8.3.08

Für DM7000 Stick,HDD,CF

Bitte mit Flashwizard installieren

Hallo Dreambox Fans



Und hier der aktueller Backup

Cams

scam 3.29a .. AU TPS AU

scam 3.26 Polsat AU

Evocamd. 2.17 .. AU

Mgcamd 1,29a .. AU; TPS AU

camd3 899

CCcamd 2.0.8 .. AU TPS AU

Mbox_v.0.1_BETA

New CS



Einige Plugins
Tux Commander
Tux Wetter
Und andere

Alle Sprachen zur Auswahl


Hacksat-k..s_Updater


Für PW Unterkanäle, bitte grüne Taste an der FB 1 Sekunde lang drücken.:thum:
 
Last edited:

vegeku90

Registered
Messages
1,586
SifTeam 1.9.0 Dreambox[7000]

Relativo all'immagine 1.8.9
-----------------------------

Coder: ngc1927
--------------
Aiutanti: porto - frog68 - MaxZ4 - jlmota
-----------------------------------------
Betatester:

genge = 350 - 200
astemio = 250 - dm7020
frog68 = dm500
neri73 = dm7000S
voodo3 = 400
theseven = dm500s - dm7020s
black33 = dm600pvr
biondo79 = 250s - DM500s - DM600PVR
imasna = dm600pvr
piefav = dm7020
-----------------------------------------------------------------------------

CAMBIAMENTI:
------------
1) Aggiornato il cvs al 20.03.2008
2) riabilitato il Debug in enigma
3) Il modulo CI e' presente in tutti i menu' (anche nei decoder che non hanno CI) in modo
che tutti possano selezionare l'opzione "Trattare due canali" (vederne uno e
registrarne un'altro, ..chiaramente dallo stesso transponder, canali criptati)
4) Sistemato il bottone giallo in caso gli si associ il Timeshift (introdotto dagli ultimi CVS)
( > 1 secondo ..come consigliato da black33)
5) Aggiunto il supporto a NFS (e i vari supporti nel kernel)
6) Rimossi i "picon" di base dal dm7000 (non bastava lo spazio per gestire NFS) e quindi anche
dagli Ipbox 250 - 350 - 400 (derivano dal ramo del 7000) (e poi in questi modelli si possono
mettere in un supporto esterno)
7) Reinserito Gestione Dischi e Gestione Swap (sono in "Pannello di Controllo" HDD/USB)
8) Aggiunta l'opzione per poter disabilitare, le funzioni principali, dei 4 bottoni colorati.
9) Modificata WebIf per visualizzare l'ecm.info (reload ogni 6 sec.)
10) Adattati gli ipbox alla nuova V5 di "sandali"
 

marce

VIP
Messages
7,115
Backup..SifTeam-1.8.9_multiboot...

sif-team 1.8.9 x multiboot

setting dual feed vhannibal

info,center,sky-epg

satankey-uploader..


CCcam 2.08,CCcam 2.08+newcs 1.50,CCcam
 
Last edited:

marce

VIP
Messages
7,115
SifTeam-sexy-1.8.9B-7000.img.zip
was entered by BRUUT-DREAM on 03-30-2008 at 01:00 Hours and was read 16 times.


Description:

Related to the image 1.8.9
-----------------------------

Coder: ngc1927
--------------
Assistants: I bring - frog68 - MaxZ4 - jlmota
-----------------------------------------
Betatester:

genge = 350 - 200
non-drinker = 250 - dm7020
frog68 = dm500
neri73 = dm7000S
voodo3 = 400
theseven = dm500s - dm7020s
black33 = dm600pvr
biondo79 = 250s - DM500s - DM600PVR
imasna = dm600pvr
piefav = dm7020
-----------------------------------------------------------------------------

CHANGES:
------------
1) adjourned the cvs to 25.03.2008
2) rehabilitated the Debug in enigma
3) systematized the yellow button in case him the Timeshift you associate him (introduced by the last CVSs)
(> 1 according to.. as recommended by black33)
4) adds the support to NFS (and the various supports in the kernel)
5) I removed the "picon" of base from the dm7000 (the space was not enough for managing NFS) and therefore also
from the Ipboxes 250 - 350 - 400 (they derive from the 7000 branch) (and then in these models they is able
to put in an external support)
6) inserted again Management Disks and Management Swap (I am in "Control panel" HDD/USB)
7) adds the option to be able to disable, the principal functions, of the 4 colored buttons.
Modified WebIf to visualize the ecm.info (reload every 6 sec.)
9) suited the ipboxes for the new V5 of "sandals"

1.8.9B:
-------
1) adds the bootlogos where they missed
2) compiled all the models with the option "LCD Enabled" (to make to work some plugins that ask for him/it)
3) eliminated in 400 a lace that stopped the start (still to make a will the names channels and the fan)


1.8.9B-sexy:
-------
1) adds the file / etc/image-version (it visualizes the version of the firmware in the menu'informazioni, thx frog6
2) changed / etc/rel_name (it now brings B)
3) assistant other control in 400 for the channels in the display
4) Bootlogo and WebIf logo by frog68


NOTES:
-----

For the version ipbox-200@64mb is owed:
1) to install the normal 200 image
2) to install the file "serial_uboot_64.img"
.. both with Flashtools or Flasher


Programs:
To start personal programs, valid for all the images SifTeam: To add the wanted command in / var/etc/rcS.d/S99user_start.sh after all to the file (I am already there' present different ready examples to the use, enough decommentarli removing the symbol #)

Tips:
To enter the Control panel if it is us in the Panel Emu all it takes is pressing the yellow button, function joins for the use in the WebIf.
To open the menu' Script while it is being us in the Control panel all it takes is pressing the 0 (zero)


attachment.php
 

k@lkov

Super VIP
Messages
10,003
SifTeam 1.9.0 dm7000

SifTeam 1.9.0 dm7000
Changelog relativo alla 1.9.0
Sui nostri firmwares non è presente alcun clonekiller per i dreambox 500

Coder: ngc1927
--------------
Aiutanti: porto - tension9000 - frog68 - MaxZ4 - jlmota
-------------------------------------------------------
Betatester:
genge = 350 - 200 - dm7000
astemio = 250 - dm7020
frog68 = dm500
neri73 = dm7000S
voodo3 = 400
theseven = dm500s - dm7020s
black33 = dm600pvr
biondo79 = 250s - DM500s - DM600PVR
imasna = dm600pvr
piefav = dm7020
cupidz = ipbox200 (64mb mod)
superfly= 350
-----------------------------------------------------------------------------

CAMBIAMENTI:
------------
1) Aggiornato il cvs al 08.04.2008
2) Aggiunto il fulltime
3) Aggiunto l'orologio analogico
4) Sistemato la data con 2 caratteri (Mer. 9-4 diventa Mer. 09-04)
5) Corretto problema pannello "Backup" (non salvava la dir. voluta, riportato da GerryG)
6) Aggiunto il bottone "Online2" per chi vuol usare il proprio url di addons
7) Aggiunti diversi comandi di default in minicron (tipo "weekepg_offline" ecc..)
8) Negli ipbox il file "/sbin/streamts" e' un link a /var/bin/streamts
(cosi' si puo' provare a cambiare)
9) Aggiunto l'opzione "Inverti" nel bottone verde
(richiesto da "albsat" per il subservice di Premiere, cosi' compare con un solo click)
10) Il nome nel bottone "Online2" (che corrisponde all'url2) si puo' personalizzare da:
/var/etc/SifTeam/tmp/url2_name

Programmi:
Per avviare programmi personali, valido per tutte le immagini SifTeam: Aggiungere il comando voluto in /var/etc/rcS.d/S99user_start.sh in fondo al file (ci sono gia' presenti diversi esempi pronti all'uso, basta decommentarli rimuovendo il simbolo #)

Tips:
Per entrare nel Pannello di Controllo se ci si trova nel Pannello Emu basta premere il bottone giallo, funzione aggiunta per l'uso nella WebIf.
Per aprire il menu' Script mentre ci si trova nel Pannello di Controllo basta premere lo 0 (zero).
 

marce

VIP
Messages
7,115
SifTeam 1.9 DM7000 BU.

SifTeam 1.9 DM7000 BU 25.4.08

Description:

SifTeam 1.9 DM7000 BU 25.4.08

Für DM7000 Stick,HDD,CF

Bitte mit Flashwizard installieren


Emus:

scam 3.29a .. AU, Polsat AU

scam 3.26 ...AU, Polsat AU

Evocamd. 2.17 .. AU

Mgcamd 1,29a .. AU

camd3 900

CCcamd 2.0.8 .. AU, TPS AU



New CS



Einige Plugins
Tux Commander
Tux Wetter
Und andere

Alle Sprachen zur Auswahl


Hacksat-k..s_Updater

Satan-k*ysupdater

K... Stand:25.4.08


Viel Spass damit
 
Last edited:

k@lkov

Super VIP
Messages
10,003
SifTeam 1.9 DM7000 - 04.05.08

SifTeam 1.9 DM7000 - 04.05.08
Für DM7000 Stick,HDD,CF

Bitte mit Flashwizard installieren

Emus:
scam 3.29a .. AU, Polsat AU
scam 3.26 ...AU, Polsat AU
Evocamd. 2.17 .. AU
Mgcamd 1.30 .. AU,TPS AU
camd3 900
CCcamd 2.0.8 .. AU, TPS A
New CS

Einige Plugins
Tux Commander
Tux Wetter
Und andere

Alle Sprachen zur Auswahl

Hacksat-k..s_Updater

Satan-k*ysupdater

Viel Spass damit
 
Status
Not open for further replies.
Top