Powervu on 4.8E & 0.8W black screens

IsN0G00d

Registered
Messages
31
Hello Andriatic22

Thanks for your answer.
BH=Blackhole?
You can help me with the oscam configuriation?

Thank you again

Hello Andriatic22
 

IsN0G00d

Registered
Messages
31
Hello again Andriatic22

The openpli supported. The last image is 16/12/2019. The bh is 2018, but i don't know if have supported. Anyway if you use this image can you tell me pls how to configure it to play discovery 0.8w and 4.9e?

Thank you
 

m35istan

Registered
Messages
692
Hi,
I use Black Hole all 4.8 and 0.8 powervu OK.
Code:
OSCam: 1.20_svn Build: r11571-798 Compiler: mipsel-openpli40-linux-gnu

My config:
[global]
disablelog = 1
logfile = /dev/tty
clienttimeout = 3500
fallbacktimeout = 120
bindwait = 5
unlockparental = 1
emmlogdir = /etc/tuxbox/config/
failbantime = 1440

[cs378x]
port = 13001@1811:003600,003315,003311,000000
suppresscmd08 = 1

[newcamd]
port = 12121@0D96:000004;12122@0624:000000
key = 0102030405060708091011121314

[cccam]
port = 12000
nodeid = 43F7DDF9102A157E
version = 2.2.1
reshare = 1

[streamrelay]
stream_relay_enabled = 0
stream_relay_ctab = 0E00

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
delayer = 60
user = solo2
read_sdt = 1
extended_cw_api = 1
boxtype = dreambox

[webif]
httpport = 8888
httpuser =
httppwd =
httpallowed = 0.0.0.0-255.255.255.255

[reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,0E00,1010,1801,2600,2602,2610
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000

[account]
description = dvbapi
user = solo2
keepalive = 1
au = 1
group = 1,2,3,4,5
 

EnoSat

Senior Member
Messages
1,952
reduce ident
Code:
ident = 0500:021110;0604:000000;0E00:000 000;1010:000000;2600:000000;2602:000000;2610:000000
 

m35istan

Registered
Messages
692
reduce ident
Code:
ident = 0500:021110;0604:000000;0E00:000 000;1010:000000;2600:000000;2602:000000;2610:000000

:) Not change anything and not important.
I know some ident is very old or not used.
But oscam put this ident.
 

IsN0G00d

Registered
Messages
31
Hello m35istan

Thank you for your help. You can upload the oscam version please? Because i have the latest and i don't now if work it.

Thank you again
 

IsN0G00d

Registered
Messages
31
Hello again.

I install OSCam r11546-798. I use the config to post it here. I download the last softcam.key but nothing. Now is black screen and no sound. What make a mistake?

Thank you
 

Adriatic22

Registered
Messages
216
Hi IsN0G00D
Put these config

[global]
logfile = /tmp/oscam.log
nice = -1
preferlocalcards = 1
block_same_ip = 0
block_same_name = 0
ecmfmt = P: c:p:s:d:i:0 #ECM_L:l #CW=w HOP:j

[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = dvbapi
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox

[webif]
httpport = 8888
httprefresh = 10
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
http_status_log = 1

And this

[account]
user = dvbapi
monlevel = 4
keepalive = 1
au = 1
group = 1
 

Adriatic22

Registered
Messages
216
Sorry,missing disablecrccws_only_for in global config

[global]
logfile = /tmp/oscam.log
nice = -1
preferlocalcards = 1
block_same_ip = 0
block_same_name = 0
ecmfmt = P: c:p:s:d:i:0 #ECM_L:l #CW=w HOP:j
disablecrccws_only_for = 0E00:000000;0500:030B00;0500:050F00;098C:000000;09C4:000000;098D:000000

[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = dvbapi
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox

[webif]
httpport = 8888
httplocale = en_En.utf8
httprefresh = 10
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
http_status_log = 1
 

Adriatic22

Registered
Messages
216
Did you copy my corrected with disablecrccws.Maybe you not have a latest softcam keys,and must wait for AU keys.
 

Adriatic22

Registered
Messages
216
These softcam is not good,because frequency 12360 V 4.8E,and 12303 V 0.8W must have a same group as 048E.Frequency 12322 V is good 005E.Try to find softcam by enigma 1969 and install these softcam.
 

Adriatic22

Registered
Messages
216
Did you install oscam for Blackhole image,and change oscam.config and oscam.user.Stay on Discovery Europe channel,and wait a few minutes.
 

m35istan

Registered
Messages
692

Hi,
This softcam work both powervu.
I try it.
You must check webif your oscam work or not.
If oscam work you must hear sound with my config.
My receiver is vu solo2 so my config a little bit different your dm800.

For dm800 you must write 2 :

Code:
[dvbapi]
enabled                       = 1
au                            = 1
pmt_mode                      = 0
request_mode                  = 1
delayer                       = 60
user                          = solo2
read_sdt                      = 1
[B][COLOR="Blue"]extended_cw_api               = 2[/COLOR][/B]
boxtype                       = dreambox

Or1GVn.png


7B0l7L.png


gP3720.png


New softcam here : ( Change 12360 and 12303 same goup. )
 
Last edited:

m35istan

Registered
Messages
692
reduce ident
Code:
ident = 0500:021110;0604:000000;[B][COLOR="Blue"]0E00:000 000[/COLOR][/B];1010:000000;2600:000000;2602:000000;2610:000000

Hi,
Problem is this space.
I copy from my receiver but when paste here add space.
Please if you use my config delete space.
Like:

Code:
ident = 0500:021110;0604:000000;[COLOR="blue"][B]0E00:000000[/B][/COLOR];1010:000000;2600:000000;2602:000000;2610:000000

Thanks.
 
Top