oscam_emu_icam_patch

[fiji]

OScam request for windows 10 64bit latest build here ;oscam for windows

 

[zelko]

This is no fake

 

[kingcarlos]

@juli13

At the last two oscam bin (v4 and v5) i trie to start oscam but its not working . V3 bin is ok . i run the command manually no errors but oscam dont start .. No ssl problem no conf problem . Just not running .. At mispel version

Thanks

 

[andrejic]

@juli13

At the last two oscam bin (v4 and v5) i trie to start oscam but its not working . V3 bin is ok . i run the command manually no errors but oscam dont start .. No ssl problem no conf problem . Just not running .. At mispel version

Thanks

It's the same on the VU+ Zero 4k

 

[YoKo]

All is working OK on Zero4k..

 

[juli13]

@juli13

At the last two oscam bin (v4 and v5) i trie to start oscam but its not working . V3 bin is ok . i run the command manually no errors but oscam dont start .. No ssl problem no conf problem . Just not running .. At mispel version

Thanks

Post e screenshot of telnet after you start oscam

 

[dray1]

Hi , i get

undefined symbol: SSL_load_error_strings

after running the latest file for arm , i use edision mio 4k with the latest night built from Openpli .

Can somebody help ?


Also in my other receiver i start mipsel version i got this log

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Mon Oct 3 17:35:14 2022
-------------------------------------------------------------------------------
2022/10/03 18:35:14 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11714-798 (mipsel-unknown-linux-gnu-ssl-libusb)
2022/10/03 18:35:14 00000000 s debug_level=8
2022/10/03 18:35:14 00000000 s (main) System name = Linux
2022/10/03 18:35:14 00000000 s (main) Host name = osninopro
2022/10/03 18:35:14 00000000 s (main) Release = 4.8.17
2022/10/03 18:35:14 00000000 s (main) Version = #1 SMP Sun Sep 11 09:07:20 UTC 2022
2022/10/03 18:35:14 00000000 s (main) Machine = mips
2022/10/03 18:35:14 00000000 s (main) Stb model = dm8000
2022/10/03 18:35:14 00000000 s (main) Stb boxtype = osninopro
2022/10/03 18:35:14 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 11085

and instantly oscam stop .

 

[juli13]

is ssl problem for you, others raport that is ok in arm.

i will build another one for you later.

 

[kingcarlos]

Post e screenshot of telnet after you start oscam

No message at all . Bin is looking that will start but nothing .. no message nothing .. and when i check with ps what is running i get nothing working. If i has a message i can fix it by myself (openssl vesion or libcrypto compat ..) but i did get nothing

 

[dray1]

@juli13

At the last two oscam bin (v4 and v5) i trie to start oscam but its not working . V3 bin is ok . i run the command manually no errors but oscam dont start .. No ssl problem no conf problem . Just not running .. At mispel version

Thanks

As i wrote above i got the same problem , log show nothing .

 

[juli13]

Hi , i get

undefined symbol: SSL_load_error_strings

after running the latest file for arm , i use edision mio 4k with the latest night built from Openpli .

Can somebody help ?


Also in my other receiver i start mipsel version i got this log

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Mon Oct 3 17:35:14 2022
-------------------------------------------------------------------------------
2022/10/03 18:35:14 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11714-798 (mipsel-unknown-linux-gnu-ssl-libusb)
2022/10/03 18:35:14 00000000 s debug_level=8
2022/10/03 18:35:14 00000000 s (main) System name = Linux
2022/10/03 18:35:14 00000000 s (main) Host name = osninopro
2022/10/03 18:35:14 00000000 s (main) Release = 4.8.17
2022/10/03 18:35:14 00000000 s (main) Version = #1 SMP Sun Sep 11 09:07:20 UTC 2022
2022/10/03 18:35:14 00000000 s (main) Machine = mips
2022/10/03 18:35:14 00000000 s (main) Stb model = dm8000
2022/10/03 18:35:14 00000000 s (main) Stb boxtype = osninopro
2022/10/03 18:35:14 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 11085

and instantly oscam stop .

try these, oscam mipsel works fine at me

 

[dray1]

Thanks , now both versions work fine for me now.

 

[lhackr]

Hi,
can somebody provide a
x86_64-linux-gnu-ssl
version? That would be great!
(or better the sources of the patch, so that everybody can compile on his own, what is individually needed )

Thanks!

 

[juli13]

Here is the patch

Oscam icam patch

That is oscam icam patch. Created by reverse enginnering (ghidra and debugger). And should come close to original patch

www.sat-universe.com

 

[chicolrufi]

<div data-xf-p="1">hola amigos tengo un decodificador golden interstar Alpha x en el qie logre meter no se ni como un firware y una oscam r11711-798 pero no tengo ni idea de lo qie estoyy haciendo alguien me podia guiar desde cero????es para poner a mi padre el fútbol que el hombre ya es mayor.gracias desde españa








hello friends I have a golden interstar Alpha x decoder in which I managed to put I don't even know how a firware and an oscam r11711-798 but I have no idea what I'm doing and could someone guide me from scratch? my father soccer that the man is already older. thanks from Spain

 

[3satbox]

Here is the patch

Could you PLEASE compile an oscam-emu icam version with static libcrypto inside as here. Cause I dont know what I am doing wrong, but I've already flashed my box twice trying to change libcrypto 1.0.0 to 0.9.8 ((
Please If there is time, make a latest icam vesion with static libcrypto!

 

[juli13]

Could you PLEASE compile an oscam-emu icam version with static libcrypto inside as here. Cause I dont know what I am doing wrong, but I've already flashed my box twice trying to change libcrypto 1.0.0 to 0.9.8 ((
Please If there is time, make a latest icam vesion with static libcrypto!

The oscam icam file here

OSCam EMU with icam for SKY DE (stream relay)

WORKING IMAGES ATV 6-7!!! 1. Accept OSCAM config files and enter old line in the reader. 2. in the Enigma settings/extras (ATV: MENU/SETTINGS/OPERATION & INTERFACE/ system settings): Set Integrate ECM in HTTP streams to YES Decrypt HTTP Streams NO Decrypt received HTTP streams NO 3. Install...

www.sat-universe.com

are with static libcrypto

 

[Petar120]

Hi.
Do You maybe know which icam version is stable for gemini 4.1 image for dm520? I tried last one and I think v5 also and they have many freezes and constantly intereption.
Thanks for any advice

 

[3satbox]

In that matter you should use the latest version... and hope they will fix this freezes.

 

[juli13]

The v6 and v7 should be the most stable.
Anyway i sugest try all , and find the best for you because the icam patch behave little diffrent in many boxes.
one can run fine for you, can hang at another box