OSCam EMU with icam for SKY IT, UK, DE (Stream relay)

Status
Not open for further replies.

juli13

Staff member
Administrator
Messages
10,194
WORKING IMAGES ATV 6-7!!!
1. Accept OSCAM config files and enter old line in the reader.

2. in the Enigma settings/extras (ATV: MENU/SETTINGS/OPERATION & INTERFACE/ system settings):

Set Integrate ECM in HTTP streams to YES
Decrypt HTTP Streams NO
Decrypt received HTTP streams NO

3. Install OScam binary ARM
simply exchange old oscam binary under path var/bin
ATTENTION: The name of the new binary must be changed to the name of the old binary.

4. If OScam doesn't start, libcrypto 0.9.8 is probably missing. This can be fixed with a symlink via the console:

Check which libcrypto version you have by going to the folder:

/usr/lib/
or
/lib/

to: libcrypto.so

Looking for.

Depending on the version, then run the following commands via Telnet:

ln -s /usr/lib/libcrypto.so.1.0.2 /usr/lib/libcrypto.so.0.9.8

or

ln -s /lib/libcrypto.so.1.0.2 /usr/lib/libcrypto.so.0.9.8

Version 1.0.2 serves as a placeholder... match this to the version you find in your box.

5. Import channel list.
Copy the file to etc/enigma2 and then edit the bouquets.tv file there and enter the following:
#SERVICE 1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "userbouquet.SkyICAM.tv" ORDER BY bouquet

Pyur: In the Sky iCam channel list in the references, replace the C00000 with FFFF0000

Then restart the box and everything should work
 

Attachments

  • oscam-icam.zip
    1.4 MB · Views: 1,048
Last edited:

juli13

Staff member
Administrator
Messages
10,194

OSCam r11711-798 with icam for SKY DE​


ipk installer
 

Attachments

  • enigma2-plugin-softcams-oscam-icam-arm_11711_all.zip
    681.9 KB · Views: 431
  • enigma2-plugin-softcams-oscamicam-mipsel_11711_all.zip
    800.7 KB · Views: 383

juli13

Staff member
Administrator
Messages
10,194
Oscam 11714 arm EMU with icam

| Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY WITH_SSL HAVE_DVBAPI READ_SDT_CHARSETS IRDETO_GUESSING WITH_DEBUG MODULE_MONITOR WITH_LB WITH_EMU WITH_SOFTCAM
| Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX RADEGAST SCAM
| Readers : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT
| CardRdrs : PHOENIX INTERNAL STINGER SMART
build juli13
 

Attachments

  • oscam-11714-arm-EMU-icam.zip
    1.3 MB · Views: 344
  • oscam-11714-mipsel-EMU-icam.rar
    1.1 MB · Views: 188
  • 1_0_19_83_6_85_21_0_0_0_20220930014130.jpg
    1_0_19_83_6_85_21_0_0_0_20220930014130.jpg
    400.9 KB · Views: 550
Last edited:

juli13

Staff member
Administrator
Messages
10,194
Oscam 11714 EMU with icam dvbapi
Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY WITH_SSL HAVE_DVBAPI READ_SDT_CHARSETS IRDETO_GUESSING WITH_DEBUG MODULE_MONITOR WITH_LB WITH_EMU WITH_SOFTCAM
| Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX SCAM
| Readers : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT
| CardRdrs : PHOENIX INTERNAL STINGER SMART

Redegast protocol is no needed anymore


Also change the receivers setting to



"Decrypt streams -> yes",
"Include ECM in http stream -> no"
"Decrypt received streams -> no"


build juli13
 

Attachments

  • oscam-11714-mipsel-EMU-icam_dvbapi.zip
    1.1 MB · Views: 147
  • oscam-11714-arm-EMU-icam_dvbapi.zip
    1.3 MB · Views: 214
Last edited:

juli13

Staff member
Administrator
Messages
10,194
Oscam 11714 EMU with icam dvbapi ver3

| Config:
| Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY WITH_SSL HAVE_DVBAPI READ_SDT_CHARSETS IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CW_CYCLE_CHECK CLOCKFIX WITH_EMU WITH_SOFTCAM
| Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX SCAM CONSTCW
| Readers : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT
| CardRdrs : PHOENIX INTERNAL SMARGO STINGER SMART
Change the receivers setting to


"Decrypt streams -> yes",
"Include ECM in http stream -> no"
"Decrypt received streams -> no"


build juli13
 

Attachments

  • oscam-11714-arm-EMU-icam_dvbapi_v3.zip
    1.2 MB · Views: 240
  • oscam-11714-mipsel-EMU-icam_dvbapi_v3.zip
    1.2 MB · Views: 149
  • 2.jpg
    2.jpg
    252 KB · Views: 335
Last edited:

juli13

Staff member
Administrator
Messages
10,194
Oscam 11714 EMU with icam dvbapi ver4
- added Support for V13 (09C4) & V14 (098C) Cards
thanks DarkStarXxX for the patch v4
build juli13
 

Attachments

  • oscam-11714-mipsel-EMU-icam_dvbapi_v4.zip
    1.1 MB · Views: 127
  • oscam-11714-arm-EMU-icam_dvbapi_v4.zip
    1.2 MB · Views: 205

juli13

Staff member
Administrator
Messages
10,194
Oscam 11714 EMU with icam dvbapi & Redegast ver5
- New version v5 supporting Radegast and DVBAPI

Read carefully

Depending on the Oscam configuration, you can use DVBAPI or Radegast. This means that if you disable Radegast or insert no ECM data into the stream (E2 setting), the DVBAPI will be used. If you don't decrypt the stream, insert ECM (E2 setting) and activate Radegast, then Radegast will be used.



ATTENTION! You should NOT decrypt the stream, add ECM data and have Radegast activated at the same time. Then the DVBAPI and Radegast run simultaneously and, in the worst case, send both requests.


Thanks icb for the patch
build juli13
 

Attachments

  • oscam-11714-mipsel-EMU-icam_v5.zip
    1.2 MB · Views: 220
  • oscam-11714-arm-EMU-icam_v5.zip
    1.3 MB · Views: 382

juli13

Staff member
Administrator
Messages
10,194
Oscam 11714 EMU with icam dvbapi & Redegast ver 6

Changes:

- Minor optimizations
- NEON is now used for ARM CPUs. These are special parts of the CPU that can execute certain code faster. This helps with decryption. From my point of view, the load on my sf8008 drops a bit. If you want to compare it, then always with the same station and preferably the same show. The load varies greatly from transmitter to transmitter. This means that 128 packets are decrypted at the same time and not 32 as before.

With Mipsel Broadcom boxes, there is no such type of processing as far as I've read. With Mipsel I wouldn't use Radegast (if possible) and I wouldn't even compile it at all
build juli13
 

Attachments

  • oscam-11714-mipsel-EMU-icam_v6.zip
    1.1 MB · Views: 122
  • oscam-11714-arm-EMU-icam_v6.zip
    1.3 MB · Views: 278

juli13

Staff member
Administrator
Messages
10,194
Oscam 11715 EMU with icam dvbapi & Redegast ver 6 and ver 7

Changes for v7
- When zapping to a station with a pause, you don't have to wait for the 30 second timeout before the tuner is released again
- Optimization mostly for MIPS boxes
1- mipsel icam v7
2- arm icam v7
3- mipsel icam v6
4- arm icam v6

build juli13
 

Attachments

  • oscam-11715-arm-EMU-icam_v6.zip
    1.3 MB · Views: 182
  • oscam-11715-mipsel-EMU-icam_v6.zip
    1.1 MB · Views: 100
  • oscam-11715-arm-EMU-icam_v7.zip
    1.5 MB · Views: 213
  • oscam-11715-mipsel-EMU-icam_v7.zip
    1.5 MB · Views: 100

juli13

Staff member
Administrator
Messages
10,194
Oscam 11715 EMU with icam dvbapi & Redegast ver 8

Fixes (hopefully) the problems of v7. And there is a switch in the configuration menu to turn off ARM NEON support (can remain switched on for Mipsel/PC/...)
thx icb for the patch

build juli13
 

Attachments

  • oscam-11715-mipsel-EMU-icam_v8.zip
    1.5 MB · Views: 283
  • oscam-11715-arm-EMU-icam_v8.zip
    1.5 MB · Views: 598

juli13

Staff member
Administrator
Messages
10,194
Oscam 11715 EMU with icam v8 opt

This version is for the old mipsel boxes, with a change in compiler optimazer makes cpu runs in lower % in sky de stream realy

build juli13
 

Attachments

  • oscam-11715-mipsel-icam_v8_opt.zip
    1.7 MB · Views: 208
Last edited:

juli13

Staff member
Administrator
Messages
10,194
Oscam 11715 EMU with icam v9 arm
- Customization for CMake
- Added compiler parameter -fno-schedule-insns. (Thanks @hacker1 )
- Removed compiler parameter -fno-tree-vectorize. The binary runs about 10% faster with Neon (thanks [@eldi0s)
- Small change in ffdesca, which is slightly faster.

thanks icb for the patch

build juli13
 

Attachments

  • oscam-11715-arm-EMU-icam_v9.zip
    1.5 MB · Views: 287

juli13

Staff member
Administrator
Messages
10,194
Oscam 11715 EMU with icam v9 mipsel
- Customization for CMake
- Added compiler parameter -fno-schedule-insns. (Thanks @hacker1 )
- Removed compiler parameter -fno-tree-vectorize. The binary runs about 10% faster with Neon (thanks [@eldi0s)
- Small change in ffdesca, which is slightly faster.

thanks icb for the patch

build juli13
 

Attachments

  • oscam-11715-mipsel-EMU-icam_v9.zip
    1.7 MB · Views: 205

juli13

Staff member
Administrator
Messages
10,194
Oscam emu with icam support for SKY IT, UK, DE

some fixes:


> Improvement of ICAM-StreamRelay for almost all devices.

> freezing image on some channels like: Sky Sport F1 HD (19°E).

###

> Add "Russkiy Mir" Emu Support 56°E.

Just ADD the READER

Emu 56°E reader
[reader]
label = emulator
protocol = emu
device = emulator
caid = 0500,0604,0E00,1010,1801,2600,2602,2610,44A0
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;44A0:000000
group = 1
emmcache = 2,2,0,0
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000
Notes:

making your smartcard working you will need k1 key like with Sky DE.


09xx reader
########################################
## reader configuration
########################################
label = Sky_xx
protocol = smargo
device = /dev/ttyUSB1
caid = 09xx
boxid = xxxxxxxx
ins7e = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
ins7e11 = 15
k1_unique = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
detect = cd
mhz = 600
cardmhz = 369
ident = 09xx:000000
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
ndsversion = 2
If using radegast change:

  1. Include ECM in HTTP streams - YES
  2. Descramble HTTP streams - NO
  3. Descramble received HTTP streams - NO
  4. Load unlinked userbouquets - YES
If using dvbapi change:

  1. Include ECM in HTTP streams - NO
  2. Descramble HTTP streams - YES
  3. Descramble received HTTP streams - NO
  4. Load unlinked userbouquets - YES
Thx samur
 

Attachments

  • OSCam-11718-798 (armv7ve).zip
    665.8 KB · Views: 1,041
  • OSCam-11718-798 (Ubuntu x86_64).zip
    710.5 KB · Views: 259
  • OSCam-11718-798 (Ubuntu i686).zip
    690.2 KB · Views: 212
  • OSCam-11718-798 (qnap arm libusb).zip
    758.1 KB · Views: 246
  • OSCam-11718-798 (mipsel libusb).zip
    659.6 KB · Views: 669
  • OSCam-11718-798 (aarch64).zip
    711.1 KB · Views: 341
  • userbouquet.sky-de-it-uk-icam.zip
    9 KB · Views: 1,072
Last edited:
Status
Not open for further replies.
Top