nlb8022 image for CubeRevo mini 900

K

k2k2000

Registered
Messages
727
nlb8022 image for CubeRevo mini 900
* DHCP bug fixed
* SVN update to 8022

login: root
password: relook

rename usb_update_nlb8022mini.img to usb_update.img
and update using usb pendrive.

* Updated to SVN 8022mini
* included: cool,nlb_blue_nlb_grey skins from @crash
* --------- no downloads needed
* --------- nlb_blue is default used now
* included plugin: hddtemp v0.0.6 by kneubi
* included plugin: script v0.0.2 by kneubi
* updated: Danish menu language file
* remember to upload configs/files into /var/keys
Click to expand...

Old attachment removed to preserve space
 
Last edited by a moderator:
E

elgeneral

Registered
Messages
7,811
Code: 
U-Boot 1.3.1 (Jun 26 2008 - 14:58:08) - stm23-2008-03-19
Board: cuberevo-mini (0x2D42C041)
Board: 14 dotmatrix vfd front
DRAM:  128 MB
Flash: 32 MB
In:    serial
Out:   serial
Err:   serial
Reserve 0x2010000 bytes from 0xa5ff0000 for DGS upgrade buffer.
booting...
## Booting image at a0060000 ...
   Image Name:   Linux 2.6
   Image Type:   Blackfin Linux Kernel Image (gzip compressed)
   Data Size:    1699387 Bytes =  1.6 MB
   Load Address: 84401000
   Entry Point:  84402000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Warning: Unable to determine if kernel is built for 29- or 32-bit mode!

Starting kernel console=ttyAS1,115200 panic=3 root=/dev/mtdblock3 rw bigphysarea=1500 - 0x00000000 - 0 ...

Linux version 2.6.17.14_stm22_0037-cuberevo ([email protected]) (gcc version 4.1.1 (STMicroelectronics/Linux Base 4.1.1-23)) #1 PREEMPT Thu Aug 28 17:45:46 KST 2008
DGStation cuberevo board initialization
STb7109 version 3.x
Built 1 zonelists
Kernel command line: console=ttyAS1,115200 panic=3 root=/dev/mtdblock3 rw bigphysarea=1500
PID hash table entries: 512 (order: 9, 2048 bytes)
Using tmu for system timer
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 56320k/76800k available (2857k kernel code, 20424k reserved, 364k data, 96k init)
PVR=04061100 CVR=30480000 PRR=00009300
I-cache : n_ways=2 n_sets=256 way_incr=8192
I-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
D-cache : n_ways=2 n_sets=512 way_incr=16384
D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
Mount-cache hash table entries: 512
CPU: STb710x
NET: Registered protocol family 16
Generic PHY: Registered new driver
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
bigphysarea: Allocated 4060 pages at 0x847fe000.
squashfs: version 3.1 (2006/08/19) Phillip Lougher
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
STPIO layer initialised
STMicroelectronics ASC driver initialized
ttyAS0 at MMIO 0xb8032000 (irq = 121) is a asc
ttyAS1 at MMIO 0xb8033000 (irq = 120) is a asc
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
RTL8201: Registered new driver
STMMAC driver:
platform registration... <6>done!
HW MAC address: 00:13:18:02:52:3e
network device registration done (0)
STMMAC MII Bus: probed
nwhw_config: device not found
ata1: SATA max UDMA/133 cmd 0xB9209000 ctl 0xB9209820 bmdma 0x0 irq 170
ata1: SATA link down (SStatus 0)
scsi0 : sata_stm
Generic ST boards onboard flash device: 0x02000000 (32.0MB) at 0x00000000
Onboard_Flash: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
Onboard_Flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 9 MTD partitions on "Onboard_Flash":
0x00000000-0x00040000 : "nor.boot"
0x00040000-0x00060000 : "nor.config_welcome"
0x00060000-0x00260000 : "nor.kernel"
0x00260000-0x01600000 : "nor.root"
0x01600000-0x02000000 : "nor.db"
0x00060000-0x01600000 : "nor.kernel_root"
0x00060000-0x02000000 : "nor.kernel_root_db"
0x00040000-0x02000000 : "nor.all_noboot"
0x00000000-0x02000000 : "nor.all"
usbmon: debugfs is not available
ST40_start_host_control
ST40_start_host_control proceeding
ST40-ehci ST40-ehci.2: ST EHCI Host Controller
ST40-ehci ST40-ehci.2: new USB bus registered, assigned bus number 1
ST40-ehci ST40-ehci.2: irq 169, io mem 0xb91ffe00
ST40-ehci ST40-ehci.2: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (ST40)
ST40_start_host_control
ST40-ohci ST40-ohci.1: STB7100 OHCI
ST40-ohci ST40-ohci.1: new USB bus registered, assigned bus number 2
ST40-ohci ST40-ohci.1: irq 168, io mem 0xb91ffc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usb 1-1: new high speed USB device using ST40-ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
pegasus: v0.6.13 (2005/11/13), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new driver pegasus
usbcore: registered new driver asix
usbcore: registered new driver cdc_ether
usbcore: registered new driver net1080
usbcore: registered new driver zaurus
i2c /dev entries driver
i2c_st40_pio: ST40 PIO based I2C Driver
i2c_st40_pio: allocated pin (2,0) for scl (0x84759c0c)
i2c_st40_pio: allocated pin (2,1) for sda (0x84759c1c)
i2c_st40_pio: allocated pin (3,0) for scl (0x84759c8c)
i2c_st40_pio: allocated pin (3,2) for sda (0x84759cac)
i2c_st40_pio: allocated pin (4,0) for scl (0x84759d0c)
i2c_st40_pio: allocated pin (4,1) for sda (0x84759d1c)
i2c_st40_pio bus 0: SCL=PIO2[0], SDA=PIO2[1]
i2c_st40_pio bus 1: SCL=PIO3[0], SDA=PIO3[2]
i2c_st40_pio bus 2: SCL=PIO4[0], SDA=PIO4[1]
STMicroelectronics - Coprocessors st231 Init
st-coprocessor-0: No RAM reserved
st231-0 Coprocessor -------------------------------------------
    not configured!
---------------------------------------------------------------
st-coprocessor-1: No RAM reserved
st231-1 Coprocessor -------------------------------------------
    not configured!
---------------------------------------------------------------
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
stmmaceth_open: MAC address 00:13:18:02:52:3e
IP-Config: Incomplete network configuration information.
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 96k freed
Warning: unable to open an initial console.
input: Relook IR Keyboard as /class/input/input0
Empty flash at 0x0000fffc ends at 0x00010000
CLEANMARKER node found at 0x00010000, not first node in block (0x00000000)
Empty flash at 0x0002fffc ends at 0x00030000
CLEANMARKER node found at 0x00030000, not first node in block (0x00020000)
Empty flash at 0x0004fffc ends at 0x00050000
CLEANMARKER node found at 0x00050000, not first node in block (0x00040000)
Empty flash at 0x0006fffc ends at 0x00070000
CLEANMARKER node found at 0x00070000, not first node in block (0x00060000)
CLEANMARKER node found at 0x00090000, not first node in block (0x00080000)
Empty flash at 0x000afffc ends at 0x000b0000
CLEANMARKER node found at 0x000b0000, not first node in block (0x000a0000)
Empty flash at 0x000cfffc ends at 0x000d0000
CLEANMARKER node found at 0x000d0000, not first node in block (0x000c0000)
  Vendor: Kingston  Model: DataTraveler U3   Rev: 6.16
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sda: 2004991 512-byte hdwr sectors (1027 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
SCSI device sda: 2004991 512-byte hdwr sectors (1027 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
 sda: sda1
sd 1:0:0:0: Attached scsi removable disk sda
cat: /dev/usb_root/etc/chroot_dir: No such file or directory
USBKEY DEVICE = sda
Empty flash at 0x0000fffc ends at 0x00010000
CLEANMARKER node found at 0x00010000, not first node in block (0x00000000)
Empty flash at 0x0002fffc ends at 0x00030000
CLEANMARKER node found at 0x00030000, not first node in block (0x00020000)
Empty flash at 0x0004fffc ends at 0x00050000
CLEANMARKER node found at 0x00050000, not first node in block (0x00040000)
Empty flash at 0x0006fffc ends at 0x00070000
CLEANMARKER node found at 0x00070000, not first node in block (0x00060000)
CLEANMARKER node found at 0x00090000, not first node in block (0x00080000)
Empty flash at 0x000afffc ends at 0x000b0000
CLEANMARKER node found at 0x000b0000, not first node in block (0x000a0000)
Empty flash at 0x000cfffc ends at 0x000d0000
CLEANMARKER node found at 0x000d0000, not first node in block (0x000c0000)

INIT: version 2.86 booting

Activating swap.
mount: you must specify the filesystem type
rm: unable to remove `/etc/nologin': Read-only file system
Checking all file systems...
fsck 1.39 (29-May-2006)
Hostname: (none).

INIT: Entering runlevel: 3

Starting periodic command scheduler: cron.
starting network.
error
info, udhcpc (v0.9.9-pre) started
stmmaceth_open: MAC address 00:13:18:02:52:3e
debug, Sending discover...
PHY: 0:01 - Link is Up - 100/Full
debug, Sending discover...
debug, Sending select for 192.168.1.27...
info, Lease of 192.168.1.27 obtained, lease time 864000
route: SIOC[ADD|DEL]RT: No such process
adding dns 192.168.1.20
starting telnet
install default /etc/group
cp: /etc/group.default: No such file or directory
installing /etc/group failed.
sbox init script $Rev: nlb7473 $
i2c_readreg I2C_RDWR: Remote I/O error
adp2 56
open success
[TUNER -S2] slot(0) : firmware download start..
[slot 0]  12 % done.
[slot 0]  24 % done.
loading audio binary file StartAddress=0x04200000
loading video binary file StartAddress=0x04000000
[slot 0]  36 % done.
[slot 0]  48 % done.
Load module stfdma_ioctl [253]by insmod (pid 422)
Load module fdma [251] by insmod (pid 422)
Load module stmerge_ioctl [250] by insmod (pid 422)
Load module stevt_ioctl [249] by insmod (pid 422)
Load module stclkrv_core by insmod (pid 422)
Load module stclkrv_ioctl [248] by insmod (pid 422)
Load module stavmem_ioctl [247]by insmod (pid 422)
Load module stpio_ioctl [243] by insmod (pid 422)
Load module staudlx_core [238]by insmod (pid 422)
Load module stpti4_ioctl [235] by insmod (pid 422)
Load module stpti4_core by insmod (pid 422)
[slot 0]  60 % done.
[slot 0]  72 % done.
[slot 0]  84 % done.
[slot 0]  96 % done.
[slot 0]  100 % done.
*** Error main:24: can't get tvmode
Cant get tvmode information from eeprom. default is SD-PAL
TV mode : 720x576-50i
checking database revision.
[TUNER -S2] slot(0) : firmware download complete.
modules -PRE
HDD Mode
Mounting sysfs on /sys....
modules -POST
rm: cannot remove `/tmp/post_process_done': No such file or directory
starting daemon
starting vsftp daemon with /var/etc/vsftpd.conf
starting http daemon with /var/etc/httpd.conf
rm: unable to remove `/etc/nologin': Read-only file system

INIT: no more processes left in this runlevel

compiled at 08/28/08 18:24:05 by [email protected]
dir_home "/usr"
dir_db "/var"
dir_fdb "/var"
dir_hdb "/usr/db_hdd"
dir_edb "/var"
dir_scr "/usr/share/sbox/scr"
dir_mpg "/usr/share/sbox/mpeg"
dir_mpghdd "/usr/share/sbox/mpeg"
dir_media "/media"
dir_tv "/media"
dir_rad "/media"
dir_mp3 "/media/mp3"
dir_pic "/media/photo"
dir_img "/usr/share/sbox/image"
dir_fnt "/usr/share/sbox/font"
dir_locale "/usr/share/locale"
dir_plugin "/var/plug-in"
dir_pluginhdd "/usr/dir_db/plugin"
dir_addon "/var/add-on"
dir_addonhdd "/usr/dir_db/addon"
dir_tmp "/tmp"
ACCESS 00000002
Open Read/Write
ACCESS 00000002
Open Read/Write
ACCESS 00000002
Open Read/Write
ACCESS 00000002
Open Read/Write
STMERGE_Init success !!
### Warning INJ_Setup:56: [INJ] INJ PTI name isACCESS 00000002
Open Read/Write
 not exist. CHACCESS 00000002
Open Read/Write
ECK !!!!
### Warning INJ_Setup:ACCESS 00000002
Open Read/Write
56: [INJ] INJ PTI name is not exist. CHECK !!!!
### Warning INJ_Setup:56: [INJ] INJ PTI name is not exist. CHECK !!!!
### Warning DENC_Setup:72: TODO : CAN SUPPORT HD ??
ACCESS 00000002
Open Read/Write
ACCESS 00000002
Open Read/Write
[FRONT] [VFD] never use the power symbol
gfx_init() : STGFX-REL_1.5.4
gfx_open() :  opened
init default gc : 
 success
STLAYER_OpenViewPort Sucess
[VID] pig (420,31ACCESS 00000002
Open Read/Write
5) (240,192)
VID_CallbackThread(): Callback is null !
input device name "/dev/input/event0"
img: prefix "/usr/share/sbox/image"
[PVR] open for play : 0 : 0x82ba38
[PVR] open for record : 0 : 0x82be4c
[PVR] open for record : 0 : 0x82c260
[PVR] open for play : 0 : 0x82c674
[TUNER] try to detect 0
[TUNER] slot 0 : DVB-S2
[TUNER] try to detect 1
i2c_readreg I2C_RDWR: Remote I/O error
adp2 56
[cx24116] slot 0 : cx24116 initailizing start
[cx24116] slot 0 : cx24116 initailizing success
scandir: Not a directory
[INITIALIZER] Failed to initialize "text(-1)"
Close
Unmount /var
umount: Couldn't umount /var: Inappropriate ioctl for device
killall: dropbear: no process killed
killall: smbd: no process killed
killall: nmbd: no process killed
killall: mgcamd.ip9000hd: no process killed
killall: evocamd.ip9000hd: no process killed
/etc/init.d/run_sbox: line 72:   610 Terminated              /var/etc/start_cam
Unmount /media
umount: Couldn't umount /media: Invalid argument
umount: Couldn't umount /media: Invalid argument
umount: Couldn't umount /media: Invalid argument
sbox return : 255
panic: 
########################################################################
# If you want to report the bug, capture the serial port(this message) #
#    and send it to us with detailed explain of what you did.          #
#   e-mail address : [email protected]                           #
########################################################################
init script $Revision: 4454 $
press power button to turn off the power.
modules -POST done
 
You must log in or register to reply here.
Top