MultiCAS with CheopsCAS all channels open

[reddevils]

Found on forum Az-BR.com EMU MultiCAS 1.70-1D with CheopsCAS v1.00 open all channels
What I did to see if it works and fix the issues that I had
First download CheopsCAS v1.00 from azboxwould.com (it say v1.01 but .cfg is v1.00)
At first when I activated CheopsCAS was unsable I found the key.bin file in CheopsCAS was empty so what I did was to check all EMUs and multiCAS have a same file
Open CheopsCAS with FZ FTP and open multiCAS copy Key.bin into CheopsCAS make sure that the file has transferred before you reboot (not like me)

First setup
CheopsCAS (only open’s N3 as must off braisl is now changing or already change to N3)

#Multicas
#newcs
#Mbox

Second setup
MultiCAS (only opens N2 (what I understand from the foru
#CheopsCAS
#newcs
#Mbox

What I have setup now and working with all channel open with Audio in Portuguese Spanish English (except HD) that am still working on
Deleted and download from azboxwould.com multiCAS 1.71

Setup
CheopsCAS v1.00
Multicas v1.71
#newcs 1.35
#Mboxcas
#CCcamCAS v1.00
#ect ect

Y should now have picture and sound in your regin
I need to say this, that not all channels are stable there are some freeze for about 1s what is coursing this I do not know, only the person or persons that have develop the ChopsCAS.
Am sharing this with y and on over forum’s if you have ideas that could in prove this setup to make more stable or updating keys channel list please share so that all can in joy.

 

[reddevils]

just an update

Well all running fin, change MultiCAS to 1.71A now have most HD channels open
have a lot less freezing channel lost.
Found out why this is happing
The channel lose is due to the broadband connection keeps droping i have 10Mg ISDN so called broadband this is what Oi say is which its not, not like the UK BT units always on.
I found out that if i shut down the office PCs but off course network is on i find the frizz start later that night or sometimes all channels (chops) are lost, soon as i reboot have to sometimes reset the broadband all channel are open.
basically the line has been dropped which is common here give them a ring get that same response. y line is ok YA YA they need to sort out more line!
So all perfect for me next year i get another HD and link them up.

 

[tonydix]

I am trying to get Amazonas N2 signals on my Azbox here in Panama. I tried to go to the Az-BR site but I need a Receptor:: *
Can anyone help
Thanks
Tony

 

[reddevils]

y need a 60CM dish plus LMB i hope that what y looking for, then y need to point 60W look arounds to see what other CASA are pointing too. try to get hold off or buy a Satellite Fider $10 dus help in pin pointing, then y have to add-just the qulity ask the wife or a mate to help. then on the AZBox some time y see no Q sig, y may need to flik through the sig to y see the Q to gain better Q, dont do blind scan untill y have good Q sig

 

[davodeni]

all chanells is open but I trying many channells on astra 19° and hotbird 13° but nothing is open what wrong I done .

 

[reddevils]

I cant say the exact resion that some sat can open and other cannot it may be down to the software program or the codes.
am unable to open any chennels on Intelsat II and Star One 70W i know that in the past i used an old multiCAS that did open but then used with Cheops all blanked out. untill i get another box am sticking with Amazone 558 channels open and 30+ just on sport am