More than 2000 GB CSA-RBT v1 tables

SatEze

Donating Member
Messages
274
Thanks for replay:I am trying to unzip Table 08hx00h (1) ,but the unzip stops at table 15,so I am not able to go in.Someone has this table or can tell me where I can find?It is not possible to connect to mega.
Thanks in advance
Alberto from Italy
I experienced the same problem until I used "PowerArchiver 2016" as all other extractors didn't work. If you can get a copy of PowerArchiver 2016, or later your problem should be solved.
 

valdichiana1

Donating Member
Messages
12
Unfortunately there are damaged boards: I checked with MD5 and the relative checksum. If I could have the damaged boards I could replace them, but mega.nz doesn't work anymore. I don't even know who to contact, nor how to generate them from me.
 

Youknowme02

Registered
Messages
245
This is what I found that if you can unpack them with a Mac OS and then transfer them to a Windows machine, that seems to work a lot better then unpack them using a windows machine, the problem is the amount of ram you have on your windows machine, or you can try making a large swap file and see if you can unpack them that way.
 

valdichiana1

Donating Member
Messages
12
I found ten damaged boards, for a total of about 50giga (08hx00h Table1 z15 and Z16, Table2 z10, z15, z16, z27, Table3 z3, z4, z23, z26). If anyone had these good tables, I could send one or two usb pens, so the person willing to do this could fill them with what I miss.
Thanks
Alberto.
 

captinkirk

Registered
Messages
10
Is there a torrent available for these? If not, I would be willing to host for torrent and have a gigabit connection with no caps available to host. I already have everything for v2, we would just have to figure out where to host the torrent file and get a few who would be more than happy to seed. PM me if your interested.
 

signalq

Registered
Messages
4
Can someone please share a link for 08hxFFh_table5.z20? My downloaded copy is corrupt and the Mega link is no longer valid. Thank you.
 

seefoo

Registered
Messages
9
mix and match

i have downloaded tables 1 - 32 from the version 1 table download. Can I use the V2tool or do I need to use the V1 tool? The site says it's "old version" The Version 2 tool is supposed to word faster but I don't know if it's compatible with the Version 1 tables.
 

seefoo

Registered
Messages
9
i have downloaded tables 1 - 32 from the version 1 table download. Can I use the V2tool or do I need to use the V1 tool? The site says it's "old version" The Version 2 tool is supposed to word faster but I don't know if it's compatible with the Version 1 tables.

Is the zip file at the end of the tables contain all the tables above it? If so, that would be the one to download and extract. Right?
 

seefoo

Registered
Messages
9
file size

Howdy.... Starting extracting tables and the first one balloned to 220gig. Did another - same thing. I would run out of space on a 2tb drive after 10 tables with a ton more to go. Anybody run into this? fix?
 

seefoo

Registered
Messages
9
hard drive

I have a 2tb hard drive. The problem is that a 220gb file extracted from a 4.6gb ziped file doesn't make sense. Unzipping a 4.6gb file should produce something a lot less than 220gb. If I unzip all 32 tables from V1 table1 that would produce 7tb worth of files. Something is amiss here. I've used pzip, power archiver too. I hate to download all 32 tables again but maybe that's the answer.
 

barney115

Donating Member
Staff member
Administrator
Messages
24,682
You don’t need the whole table you just need 3 of table one FF, F0, 3000,
So what you are saying is just to d/load
B8hx030000h_table1.z01 and B8hx030000h_table2.z01
B8hx00h_table1.z01 and B8hx00h_table2.z01
B8hxFFh_table1.z01 and B8hxFFh_table2.z01

then extract those parts only :confused:
 

campag5242

Feed Hunter
Messages
2,582
Barney. To get started, you need only one V1 table for each plain type 00h/FFh/030000h.

To get eg B8hx030000h table1, you need to download *all* 30 or so files of the multi-part zip named B8hx030000h_table1.z01 through to the final .zip

If the downloads are good (checksums match those on Colibri's site), then you can unzip to single .rbt file, around 200GB. Re-download any with bad checksums.
 

barney115

Donating Member
Staff member
Administrator
Messages
24,682
okay i'm finding a few links really slow i usually get 30mb/sec but on some links its 3-5mb/sec so its going to take quite a bit longer than i expected but important thing i guess is just keep going and be patient until all parts are completed .
cheers !
 

Youknowme02

Registered
Messages
245
So what you are saying is just to d/load
B8hx030000h_table1.z01 and B8hx030000h_table2.z01
B8hx00h_table1.z01 and B8hx00h_table2.z01
B8hxFFh_table1.z01 and B8hxFFh_table2.z01

then extract those parts only :confused:



Oh no you need all the part those three tables.
 

seefoo

Registered
Messages
9
At wits end. I have all 32 of table one downloaded. I'll get the zip table later. I have tried peazip, winzip, 7 zip, powerarchiver and nothing unzips any of the 32 tables. Pezip did z01 and it ended up being 212gb. Not possible. Any help here? Frustrated. I'd mail a hard drive to anyone that can put the tables on it. fee included.
 

campag5242

Feed Hunter
Messages
2,582
It's a multi-part zip: the 30 or so files ending .z01, .z02... .zip are a set, and do indeed extract to a single .rbt file of around 200GB
 

seefoo

Registered
Messages
9
I understand that all files will get to 220gb, but what I'am saying is that z01 showed up at that size after extraction. So, 32 tables times 220gb would be a super computer size hard drive. Ahhhhhhhhhh!
 
Top