Missing feed hunter option

[scannie]

I'm only interested in temporary feeds (news / sport).
It takes some time to find these channels.

First I search for transponders with EBSpro software.
Then I import the transponder file in AltDVB or DreamDVB and scan the found tranponders.

After this step I need to select each channel to see if it's sending an active video signal.
Sometimes the software needs more time to change from one channel to another.

Is there software that scans each channel automaticly for active video signals.
This option will reduce a lot of time.

 

[Cjcr]

I'm only interested in temporary feeds (news / sport).
It takes some time to find these channels.

First I search for transponders with EBSpro software.
Then I import the transponder file in AltDVB or DreamDVB and scan the found tranponders.

After this step I need to select each channel to see if it's sending an active video signal.
Sometimes the software needs more time to change from one channel to another.

Is there software that scans each channel automaticly for active video signals.
This option will reduce a lot of time.

Hi, why don't do all of these steps just with EBSpro? It does have a TS scanner and also a video player. You don't need anything else. Even you can put b*ss k*ys.

 

[scannie]

@Cjcr I tried this option.
The sidepanel scanner is only available when blindscanning in mode Bl Scan, not in Bl scan2.
Bl scan mode takes 30 minutes or more for a sattelite scan.
Bl scan2 mode takes 4 minutes for a satelite scan.

I see in your screenshot the information was scanned in 35 seconds, including the sidepanel scanner.

My workaround is:
- select sattelite
- select sidepanel mode
- start scan (only in BS scan2 the results are shown in the sidepanel).

Do I something wrong?

 

[Cjcr]

@Cjcr I tried this option.
The sidepanel scanner is only available when blindscanning in mode Bl Scan, not in Bl scan2.
Bl scan mode takes 30 minutes or more for a sattelite scan.
Bl scan2 mode takes 4 minutes for a satelite scan.

I see in your screenshot the information was scanned in 35 seconds, including the sidepanel scanner.

My workaround is:
- select sattelite
- select sidepanel mode
- start scan (only in BS scan2 the results are shown in the sidepanel).

Do I something wrong?

You can also scan transponders after BLScan2 ends. Just move all transponders to Side Panel Scanner (select all and then move it to the side panel with mouse or right click -> scan in sidepanel).

 

[scannie]

@Cjcr is the scantime of all transponders 35 seconds? Your screenshot shows this time.

 

[Cjcr]

@Cjcr is the scantime of all transponders 35 seconds? Your screenshot shows this time.

Yes, the TS scan time for 11 transponders is 35 seconds and found 95 services.

So, first you need to do a BLScan2 and then move all transponders found to the Side Panel Scanner. It will scan it fast after this.

 

[scannie]

Yes, that is the solution.
When I use the internal EBSpro player, I can't see the 4:2:2 streams.
I can't recognize them as 4:2:2, because this information isn't shown.
Then it seems to be a decoded signal and I'm missing it.