First, thanx to Ruspi for reasuring me re. Mbox and for not stopping praising it and hoping, together with me, that I will soon have it working, in my young box, too..... Live long and prosper!:thum: I was getting a bit frustrated and ever so slightly down about it.....:mecry:
Secondly, thanx to TD team, who put all the necessary Mbox files for AZboxHD together properly [which I will upload here]!!! Before that whatever I tried just didn't work. I learnt a few things from this!
Last but by no means least, thanx to Mower for a super job, although this is still allegedly but a "beta/test process"... GBox is now officially dead, long live Mbox!!! Our collective hat down, as I know I am speaking for all of us, using your lovely toy!!!:thum:
MBOX HOW TO:
Unpack this file and find the cwshare to edit just a bit. [Only that one needs messing with - and no other!]
This team very kindly put together and configured everything for AZboxHD. Their cwshare.cfg [included] looks as follows:
So, edit this, an almost complete template [both for client and server purposes] - which works rather well, actually - using these explanations:
M: line is for your data;
G: line is for people who are using Mbox, whose cards you wanna hook onto as a client;
D: line is for people who are using GBox, whose cards you wanna hook onto as a client;
C: line(s) [as far as I can see] is/are for your card(s), local or from DNS, depending on what [and if] you have [any]. I will learn more about that - and report back - as soon as I get a card or two......
Lines which have # in front of them do not matter - those are explanations only - feel free to leave them there.
Now, kindly Save it and then shove it all into your AZboxHD by Telnet/Total Commander/whatever.
Go into the OpenXCAS folder, where you need to grab them [you can do all 5 of them at once] and send them into the OpenXCAS folder of your AZboxHD. If asked to "overwrite" files choose "Yes to all of them".
Once they are in AZboxHD, give all the files CHMOD 755 "treatment" [rights].
Now, go into AZboxHD Menu -> Plugins -> OpenXCAS -> Activation and Priority Setting -> send MboxCAS all the way to the top using the red buton on your remote, if it isn't already there by a miracle, and remove # in front of it, if it still has it, and then start it using the yellow button!!! Get out of it, find a channel you know your colleague's cards will open... and - if you did it all correctly - wait for the colourssssssssssssss...:clapping:
Njoy!!:thum:
Secondly, thanx to TD team, who put all the necessary Mbox files for AZboxHD together properly [which I will upload here]!!! Before that whatever I tried just didn't work. I learnt a few things from this!
Last but by no means least, thanx to Mower for a super job, although this is still allegedly but a "beta/test process"... GBox is now officially dead, long live Mbox!!! Our collective hat down, as I know I am speaking for all of us, using your lovely toy!!!:thum:
MBOX HOW TO:
Unpack this file and find the cwshare to edit just a bit. [Only that one needs messing with - and no other!]
This team very kindly put together and configured everything for AZboxHD. Their cwshare.cfg [included] looks as follows:
If you wan a few more pieces of info [because you may have a local card or three and you wanna connect them to NewCS for server purposes, here's a template below...#####################
# cwshare Azbox HD #
# TD Team #
##Code:http://www.tododream.com/
#####################
I: { 3 }
X: { 4 }
O: { 4000 2000 }
M: { server.no-ip.info { AAAAAFAF }}
G: { cliente.dyndns.org { 24000 24000 { AAAAFFFF { A3 A3 }}}}
So, edit this, an almost complete template [both for client and server purposes] - which works rather well, actually - using these explanations:
M: line is for your data;
G: line is for people who are using Mbox, whose cards you wanna hook onto as a client;
D: line is for people who are using GBox, whose cards you wanna hook onto as a client;
C: line(s) [as far as I can see] is/are for your card(s), local or from DNS, depending on what [and if] you have [any]. I will learn more about that - and report back - as soon as I get a card or two......
Lines which have # in front of them do not matter - those are explanations only - feel free to leave them there.
[Additional explanations are in the mbox.cfg file and on Mbox forum...]##################################
# Mbox cardsharing config file #
##################################
# CaID
#H: { xxxxxxxx }
# Send ECM's at maximum 5 cards (please use this as default)
X: { 8 }
# Preffered cards ids (up to 32)
#X+: { 0xxx0000:5 }
#X+: { 0xxx0000:10 }
#X+: { 0xxx0000:5 }
# max card's distance to use for ecm
I: { 2 }
#*** system ->Resending ECM(s) on timeout interval
#N: { 400 200 }
N: { 01 01 01 00 400 200 }
#*** system ->Resending ECM(s) on timeout interval
#
#4000 (4 seconds)-> resend current ecm on boxid if no dcw
#2000 (2 seconds)-> wait 2 more seconds for dcw ,if no dcw on time resend ecm(s) to all boxid's
#
O: { 4000 2000 }
#Connecting to newcamd server program Newcs
#
C: { 127.0.0.1 181xx root box1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { xxxxxxxx:xxxxxxxx } #Lower Cardreader
#C: { 127.0.0.1 182xx root box2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { xxxxxxxx:xxxxxxxx } #Upper Cardreader
#C: { 127.0.0.1 184xx root box3 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } #Phoenix Interface
#
M: { your.dyndns.org { yourpass }}
# Internet Friends port range password cod
D: { hisdyndns.whateverhechose { yourport hisport { hispass { A3 A3 }}}}
Now, kindly Save it and then shove it all into your AZboxHD by Telnet/Total Commander/whatever.
Go into the OpenXCAS folder, where you need to grab them [you can do all 5 of them at once] and send them into the OpenXCAS folder of your AZboxHD. If asked to "overwrite" files choose "Yes to all of them".
Once they are in AZboxHD, give all the files CHMOD 755 "treatment" [rights].
Now, go into AZboxHD Menu -> Plugins -> OpenXCAS -> Activation and Priority Setting -> send MboxCAS all the way to the top using the red buton on your remote, if it isn't already there by a miracle, and remove # in front of it, if it still has it, and then start it using the yellow button!!! Get out of it, find a channel you know your colleague's cards will open... and - if you did it all correctly - wait for the colourssssssssssssss...:clapping:
Njoy!!:thum: