Latest Version of Mbox

Status
Not open for further replies.

Rocknroll

Staff member
Administrator
Messages
6,174
0.4 BETA build 0003
===================

-Binary for OpenWRT now compiled for 2.6 Kernel (not tested).
-Added N option in .list file to set if your card is for N3 system(not tested).
-Added code to show time in "ms" for local ECM decoding.
-Fix problem putting new ECMs in buffer and not decoding them if last decode from newcs failed.
 

Rocknroll

Staff member
Administrator
Messages
6,174
0.4 BETA build 0004
===================

-Added recording for Ipbox receiver(for Kathrein not tested!!!).
-Binary for OpenWRT devices is now build for 2.4 and 2.6 Kernel.(not tested).
-You can now change H option from mbox.cfg while mbox is running.Just put new value for H in add.data file.
-Now when H option(local card priority over network) in mbox.cfg is set to 1, mbox will only send ECMs to local card, it will ignore network cards!!.
-Fix problem putting same ECM in buffer for local decode.
-Fix problem trying to open "demux" devices in OpenWRT devices(not tested).
 

Rocknroll

Staff member
Administrator
Messages
6,174
0.4 BETA build 0005
===================

-Compiled binary for Relook 200(tested) with no floating point instruction(mbox.nofloat.ppc)
-Added E option in "port".list file.
-Added G option in mbox.cfg file.
-Added code to show from what distance is ECM for local decode.
-Fix problem recording when timeshift is OFF on SH4 receivers(tested only on IPBOX).
-Fix problem sending empty PID list to vdr-sc(not tested).
 

Rocknroll

Staff member
Administrator
Messages
6,174
0.4 BETA build 0006
===================

-Mbox is now compiled to use linux dvb api for SH4 receivers ,pls set D option in mbox.cfg to 1 (mbox-e.sh40)/not tested.
-Now you can mix enabled/forbiden SID pids and enabled/forbiden ChID and ofcourse ECM pids.(Pls. mix ecm pids and SID pids , very useful for Nagra system and Conax(and others) because all cards are mapped to 1801 or 0B00 caids).
NOTICE: Local card will not work without "port".list file. "port" is number from C: line { IP 12000 ..... } ,for this example file will be called 12000.list .Put this file in K path.(read port.list.example)

-Remove N usage from "port".list file.
-Fix problem: putting the same ECM from different peers in ECM buffer for local decode.
-Fix problem: after card reinit/offline and again reconnected to newcs, mbox didnt start decoding ECMs in buffer.
-Fix problem: local card dont have full priority over network cards.
 

k@lkov

Super VIP
Messages
10,003
Mbox 0.4 BETA build 0008

Code:
0.4 BETA build 0008
Code:
-Fix problem: some options in "port".list file didnt work good.
 

k@lkov

Super VIP
Messages
10,003
0.4 BETA build 0009

Code:
[B]0.4 BETA build 0009[/B]
-Added value 4 for Kathrein in D option, to select Linux DVB API
 (mbox.cfg)/(not tested!!)
-Added binary for Linksys NSLU2,(ARMv5TE) CPU, (mbox.arm) (not tested).
-Added R option in "port".list file.Default value is 5 seconds.
-Fix remembering wrong Sid pid from PMT table.
-Fix few nasty bugs in PMT parser code.
 

Rocknroll

Staff member
Administrator
Messages
6,174
0.4 BETA build 0010
===================

-Fix problem with some dvb descriptors in PMT table.
 
B

boxgot

Mbox 0.4 BETA build 0011

Mbox 0.4 BETA build 0011

0.4 BETA build 0011
===================

-Added F option in mbox.cfg.
-Few changes in code.
-Fix problem with some dvb descriptors in PMT table.
 

Rocknroll

Staff member
Administrator
Messages
6,174
0.4 BETA build 0013
===================

-Added P option in cwshare.cfg.Read README.cwshare.txt.
-Removed H option from mbox.cfg.Now H option is in cwshare.cfg file.Read README.cwshare.txt.
-Added code to check changes in "port".list file.New values will be in use after 2 minutes!!
-Few changes in code.
 

tani1

Staff member
Super Moderator
Messages
17,767
MBOX 0.4 BETA build 0014

Code:
0.4 BETA build 0014
===================

-Fixed bug in parsing Hello msg and losing cards.
 

Rocknroll

Staff member
Administrator
Messages
6,174
Mbox 0.4 BETA build 0015

That is incorrect .

Mbox emu is NOT only for HDTV chip set STB .

Latest mbox file set contains files for mips and ppc it is use by dreamboxes ppc for E1 and mips for E2 .

Regards LilleMama.

Yes, but this forum is meant for Sh4 version of it. Even though zips uploaded contain other versions. It just easier to leave the package as it is, and author packs them all in one archive.

BTW, new version is out.

0.4 BETA build 0015
===================

-Added code for gbox protocol over TCP (TCP<->UDP / UDP<->TCP / TCP<->TCP). Read README.cwshare.txt.
-Few changes in code.
 

marce

VIP
Messages
7,115
mbox04_beta_build_0016

0.4 BETA build 0016
===================

-NOTICE: gbox support has been broken in this build,
so dont try to connect to gbox/(old mbox) network, ain't gona work !!!!

-Remove mapping for N3 and some Conax providers.
-Fix problem with local card(s) priority( I hope .
-Fix PMT parsing code, not showing some crypto systems.
 

k2k2000

Registered
Messages
727
Mbox 0.4 BETA build 0017

Code:
0.4 BETA build 0017
===================

-NOTICE: gbox support still broken !!!

-Fix few problems with new hello msgs.
-Added detection if peer goes offline but didnt send offline hello msg (mbox crashed or mbox kill-ed).
-Changed code for ECM filter(s).
 

tani1

Staff member
Super Moderator
Messages
17,767
mbox 0.4 BETA build 0018

0.4 BETA build 0018
===================

-NOTICE: gbox support still broken !!!

-Added W option in add.data file to request current dcw caches from one peer.If there is some dcw caches from that peer, new dcw_cache.info file will be created in tmp path.
-Fixed few problems with new hello msgs again ohmy.
-Better handling ECM filters.
 

tani1

Staff member
Super Moderator
Messages
17,767
mbox 0.4 BETA build 0019

mbox 0.4 BETA build 0019

-NOTICE: gbox support still broken !!!

-Fix not showing online some peers.
 
Last edited:

Rocknroll

Staff member
Administrator
Messages
6,174
Mbox 0.4 Pre Beta build 0020

Thanks to mower:

-TCP peers/connection (TCP0/TCP1 in cwshare.cfg) now works only with mbox peers!
-Mbox peers will have 1.00 as version number.
-Mbox peers now must be in G line in cwshare.cfg,D line stay for old gboxx peers.
-Added R option in mbox.cfg.
-Added J option in mbox.cfg. You can change J option with add.data at any time.
-Added A option in mbox.cfg , needed for QBoxHD receivers.
-Added back gboxx connection/protocol.Gboxx peers cant connect to mbox peers and vice versa!!!!
-Mbox now starts as deamon(background process).
-Fixed HD channels.
-Fixed problem with duplicate boxids, now mbox keep only boxid that has lower distance.
-Added support for AzBOX receivers(binary-> mbox_module).Dont expect mbox to work as should, because current API for AzboX receivers has restrictions regarding ECM "pids" streaming.
 

tani1

Staff member
Super Moderator
Messages
17,767
Mbox 0.4 Pre Beta build 0021

0.4 PRE BETA build 0021 (REUPLOADED 3-ed time)
=======================

-Fix problem connecting to old mbox 016-019 versions.
-Fix problem with stack
-Fix problem with sending good ECM message to mbox ver. 0016-0019.

Thanks to mower
 

elgeneral

Registered
Messages
7,811
mbox 0.4 PRE BETA build 0021 REUPLOADED 4-th time
0.4 PRE BETA build 0021
=======================

-Fix problem connecting to old mbox 016-019 versions.
-Fix problem with stack
-Fix problem with sending good ECM message to mbox ver. 0016-0019.
-Added H option in mbox.cfg for mapping provids.


Thanks to mower
 
Last edited:
Status
Not open for further replies.
Top