dreamer1983
Super VIP
- Messages
- 4,878
File information :::::::: Octagon SF info
Readme_OCTAGON_SF1018_HD_ALLIANCE_V10744__23_08_09
for Octagon HD SF 1018 HDTV - ALLIANCE:
Changes:
- First Realese!
Important note before updating the software & Settings
Unzip the files in the root directory of a USB stick.
Please factory settings after SW update do?
Enable SmartCard:
Please under Menu -> Other -> MO -> OK button -> enter 1018
-> Smart Card / OFF
Memory settings (back-up on receiver):
Under Menu -> Install -> System Restore -> Choice:
-> System Restore data rücksichern ()
-> Save system data (save)
Program list and settings on USB memory stick:
Under Menu -> System Settings -> Data -> Choice:
-> System data transferred to USB memory
-> List of programs on USB memory transfer
-> Data transfer from USB memory
Sky Premiere Portal (Multisatellite) - button -> button Blaut
Master password: 1018
Connection to PC:
- Connect the receiver via LAN connection to PC
- Switch Menu -> Installation -> Network Settings -> DHCP off and ON
- Number is displayed> Wait until IP
-> Open In PC Usage -> Enter in address bar with \ \ (flashx2) \ \ IP number and ENTER
- See folder> Root (LINUX) & Storage (SATA HDD storage USB1 USB2) to!
-> Even with SAMBA program can connect with PC Reciver
Updated 23 August 2009
Readme_OCTAGON_SF1018_HD_ALLIANCE_V10744__23_08_09
for Octagon HD SF 1018 HDTV - ALLIANCE:
Changes:
- First Realese!
Important note before updating the software & Settings
Unzip the files in the root directory of a USB stick.
Please factory settings after SW update do?
Enable SmartCard:
Please under Menu -> Other -> MO -> OK button -> enter 1018
-> Smart Card / OFF
Memory settings (back-up on receiver):
Under Menu -> Install -> System Restore -> Choice:
-> System Restore data rücksichern ()
-> Save system data (save)
Program list and settings on USB memory stick:
Under Menu -> System Settings -> Data -> Choice:
-> System data transferred to USB memory
-> List of programs on USB memory transfer
-> Data transfer from USB memory
Sky Premiere Portal (Multisatellite) - button -> button Blaut
Master password: 1018
Connection to PC:
- Connect the receiver via LAN connection to PC
- Switch Menu -> Installation -> Network Settings -> DHCP off and ON
- Number is displayed> Wait until IP
-> Open In PC Usage -> Enter in address bar with \ \ (flashx2) \ \ IP number and ENTER
- See folder> Root (LINUX) & Storage (SATA HDD storage USB1 USB2) to!
-> Even with SAMBA program can connect with PC Reciver
Updated 23 August 2009