Latest Drivers for DM 900UHD

tani1

Staff member
Super Moderator
Messages
17,767
Update: 08-12-2016

dm900: update hardware drivers
- fixed 1/4 video window after bootup with enabled 4K mode
- fixed crash on bootup with some 4K TVs
- force linux tv api adapter to 0 (needs kernel update)
 

tani1

Staff member
Super Moderator
Messages
17,767
Update: 20-12-2016
dreambox-dvb-modules: update dm900 drivers
- fixed missing audio AC3 and other audio tracks (converted recordings or m2ts)
- store system time on shutdown/restart and restore it on system (re-)start
- added VP9 support
- fixed a ir decoder problem with non vendor rc without break codes
 

tani1

Staff member
Super Moderator
Messages
17,767
Update: 03/02/2017
update dm900 hardware drivers:
- improved IPTV compatibility (audio/video stuttering)
- fixed crash when no more free demux pid filters
- allow to change size of hdmi-rx monitoring window
- some audio output format improvements (e.g. fixed DDP aka AC3+ passthrough, added wma/wmapro support)
- dual tuner support changes
 

tani1

Staff member
Super Moderator
Messages
17,767
Update: 24/03/2017

update dreambox dm900 hardware drivers:

- fixed a cec logical address negotitation bug
- fixed audio decoder log spam
- fixed possible audio asynchronicy after ts playback
- improved robustness against wrong decoder usage from userspace
- use ion interface for accel memory allocation
- switched to a more direct framebuffer handling
- the blit ioctl is a nop now
- 3D OSD handling must be done in userspace now
- allow to set empty rc masks to disable twirp and/or nec support
- fixed green/pink picture after hdmi mode switching / boot up
- improved vtuner compatibility with some vtuner clients
- improved atbm781x C/T2 mode switching to fix tune errors after tuner standby
dm900:
- add HDR support (HDR10 and HLG should work)
the TV/AVR must report the correct capabilities via EDID
(on samsung tv you must enable UHD Color support in menu)
- use delayed pip window destruction to avoid flickering in virtual zap plugin
- add support for si2166dx dual tuner
- add support for si2169 based combo tuner
- add advanced video encoder settings
b-frame, p-frame, gop-length, num-slices, more framerates, h264 level,
h264 profile, open gop
- si2166/si2169
- removed long gap after diseqc message to improve unicable compatibility
- fixed dynamic/static current limiting
 

tani1

Staff member
Super Moderator
Messages
17,767
28-03-2018

update dreambox hardware drivers for dm900

- fixed PIP window handling.. it was shown after mode change event when disabled
 

tani1

Staff member
Super Moderator
Messages
17,767
Update: 10/04/2017

update dm900 hardware drivers
- opengl fixes
- si2169X: fixed PLPID read out, fixed TS output on transponders with very low bitrate
- si2166b: lower signal drop on first channel after second channel use
 

tani1

Staff member
Super Moderator
Messages
17,767
Update: 27/04/2017

update dm900 hardware drivers
- si2166b/si2169c:
- add auto DVB-S/DVB-S2 delivery system handling (like DVB-T/T2)
- fixed possible deadlock on blindscan
- si2166b: firmware update
- si2169c:
- fixed DVB-T(2) 5V switching
- add better readable debug output
- disable 5V when tuner switches to sleep
- fixed possible rf_switching problem
- fixed crash on boot with plugged Si2169-C Dual C/T2 tuner
 

victor

Registered
Messages
430
4.3.1r8
- fixed sometimes broken stored unicable SCR values in config file
- fixed CEC handling on shutdown
- fixed rarely broken tuner on weak input signals
- add 16APSK/32APSK to ServiceScan info screen
- fixed broken scaling on edge cases (broken since 4.3.1r7)
- fixed alpha animation flickering
- fixed wrong stored transponders
- fixed crash in network manager cauased by a broken french translation
- optimized rounding of frequency and symbolrate in blindscan

https://www.dreamboxupdate.com/open...m900/zImage-rescue-3.14-r0-dm900-20170621.bin
 

victor

Registered
Messages
430
4.3.1r9
- some SEC and scan fixes
- force valid isi id/pls code/pls mode values on bogus transponders
- fixed a race condition with spinners on startup (fixes possible segfault)
- added a basic DBus interface and the 'dreamboxctl' command as cli interface for it
- call "dreamboxctl -h" for information on available commands
- this is a first draft of the DBus interface, some feedback would be great
- fixed playback of very short ts files (with **** files only)
 

DR-10

Super VIP
Messages
3,689
Update: 22/07/2017
dreambox-dvb-modules: update dm900 hardware drivers
- improved compatibility with built in lc display
- non critical pcr audio fix
- fixed playback problems
- fixed video/audio/ts errors when a single tuner is used (broken since 20170710 drivers)
 

victor

Registered
Messages
430
enigma2: 4.3.1r10
- fixed motor turning when one tuner is configured to "secondary cable of motorized lnb" (broken since 4.3.1r9
- DBusInterfaceProxy: close player on stop
- developer stuff
- fixed removeNotifier for final notifiers
 

victor

Registered
Messages
430
enigma2: 4.3.1r11
- fixed tune to DVB-S(2) services when a DVB-C/T(2) tuner simultaneously is used
 

DR-10

Super VIP
Messages
3,689
Update: 09/02/2017
update dreambox hardware drivers
- revert framerate change introduced with 20180130 drivers
- use latest firmware for Si216x-D60 based tuners
- fixed sometimes not working automatic timer wakeup
- dm920:
- improved support for higher transponder bitrates
DVB-S2X FBC Tuner (45308x):
- improved DVB-S2X support
- faster transponder locking times under certain circumstances
- dm900/dm920: fixed wrong colors with some TVs in 2160p mode (e.g. Panasonic/Sony)
- revert framerate change introduced with 20180130 drivers
- use latest firmware for Si216x-D60 based tuners
 

DR-10

Super VIP
Messages
3,689
Update: 22/02/2018
update dreambox hardware drivers
- dm900/dm920 fixed a unicable problem with bcm45208 fbc tuner
- fixed a possible kernel oops on services without pcr pid
 
Top