Lastest Enigma2 Image for Azbox HD

[Doctor Who]

Pre-announcement for loading Enigma 2 in AzBox HD Elite / Premium devices by USB Memory stick and this method is 100000% RISK FREE !!! As the new beta image will follow in next hour(s) .

Thanks to the the_ripper, telesat, Darezik and other people involved in this project.

If You want to load this version of Enigma 2 for AzBox HD Elite / Premium please follow this procedure :


1 . Load this patch.bin ( Enigma 2 ) file on FAT32 formatted USB Memory Stick


2. Turn Off Your AzBox HD Device, put USB Memory Stick inside and Turn on AzBox HD Device.


3. Follow the procedure USB Update on the screen, after process is finished, remove the USB stick from the AzBox HD Device, and let AzBox HD to Reboot


4. After reboot is finished, You should be in Enigma 2 AzBox HD Running state


5. If You tested enough Enigma 2 on AzBox HD Device and want to be back on AzBox Official Firmware, it is piece of cake


6. Load on FAT32 Formatted USB Memory stick patch.bin ( Official AzBox HD Firmware e.g 0.9.5020 ) .


7. Turn Off AzBox HD Device, put USB Memory stick in Receiver, and Turn it on.


8. On VFD You will see RESCUE MODE and IP Address will be listed.


9. On Your PC run application called AzUP by our team member telesat, enter IP of Your AzBox HD Device and click on UPDATE


10. Wait that Update is finished, and You will have again AzBox HD Official Firmware


This is totally RISK FREE Installation and Recovery procedure for AzBox HD Elite / Premium Devices !!!

Please, just follow procedure, and You will not have any problem at all, as this procedure was tested many many times internally by our team.

DOWNLOAD enigma2 v1.0.21

 

[houarisat]

Enigma 2 for AzBox HD Elite

Enigma 2 for AzBox HD Elite

If You want to load this version of Enigma 2 for
AzBox HD Elite / Premium please follow this procedure :

1 . Load this patch.bin ( Enigma 2 ) file on FAT32 formatted USB 
Memory Stick


2. Turn Off Your AzBox HD Device, put USB Memory Stick inside 
and Turn on AzBox HD Device.


3. Follow the procedure USB Update on the screen, after process 
is finished, remove the USB stick from the AzBox HD Device, 
and let AzBox HD to Reboot


4. After reboot is finished, You should be in Enigma 2 AzBox HD 
Running state 


5. If You tested enough Enigma 2 on AzBox HD Device and want to 
be back on AzBox Official Firmware, it is piece of cake


6. Load on FAT32 Formatted USB Memory stick patch.bin ( Official 
AzBox HD Firmware e.g 0.9.5020 ) .


7. Turn Off AzBox HD Device, put USB Memory stick in Receiver, 
and Turn it on.


8. On VFD You will see RESCUE MODE and IP Address will be listed.


9. On Your PC run application called AzUP by our team member 
telesat, enter IP of Your AzBox HD Device and click on UPDATE


10. Wait that Update is finished, and You will have again AzBox HD 
Official Firmware


This is totally RISK FREE Installation and Recovery procedure for 
AzBox HD Elite / Premium Devices !!!

Please, just follow procedure, and You will not have any problem at .
all, as this procedure was tested many many times internally by our team.

Important: The installation of the image takes on its
own responsibility

Download image 44MB
​

 

[Doctor Who]

Enigma2 versione 1.0.25 per AZbox

Dear friends of this great community, and proud owners of AzBox HD Devices ( currently only Elite/Premium supported ) there is new version of Enigma 2 by the_ripper and team for You :

Download:

http://rapidshare.com/files/426062706/E2_Update__1.0.25.rar

What is new ?

- FTA SD and HD channels working. ( DD 2.0 , AC3 working by HDMI tested on Einsfestival HD )

- New IR driver ( few more mapped buttons e.g Info button, Audio selection is Check button on RCU )

- Fixed Section filters and PID selection.

- Added part of CA system

- Multimedia support for MPEG2 , MPEG4 ( XviD ), h264, and various audio support.

- Please read ReadMe file if You want also to install additional things to get working Multimedia by Media Player in E2.

- If You have Full HD TV , You can set resolution by editing bootup file located in :

/etc/init.d

Find line :

# Elite and Premium

below You will see line insmode ...

and replace existing insmode line with this one :

insmod /lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko options="-analog -f PAL_BG -digital -f HDMI_1080p50 -hdmi_chip SiI9030 0 14 15 100 0"

Few tips :

Before loading Enigma 2 , move Your dish to some satellite ( Astra 19.2 e is good because of FTA HD channels ), as on E2 currently we didnt fix DiseQc bug ( We will fix it when we finish Premium+ driver ).

Try to use Simple configuration in Tuner Configuration, e.g choose satellite on which position currently You are.

README for MULTIMEDIA :

If You want also to test Multimedia on AzBox Enigma 2 media player , You have to install 3 IPK files located in this archive :

gst-plugin-asf_0.10.16-r0.0_mipsel.ipk

gst-plugin-avi_0.10.25-r0.0_mipsel.ipk

gst-plugin-dvbmediasink-dbg_0.10+cvs20101006-r0_dm800.ipk

working formats:
audio: mpeg, aac, ac3, dts, wma (but not pro), pcm (not all ?)
video: mpeg2, mpeg4 (xvid), h264 (only show singe frames)

IPK Installation procedure :

Transfer 3 *.ilk files to /tmp folder of Your AzBox and run this commands, one by one :


ipkg install /tmp/gst-plugin-asf_0.10.16-r0.0_mipsel.ipk

ipkg install /tmp/gst-plugin-avi_0.10.25-r0.0_mipsel.ipk

ipkg install /tmp/gst-plugin-dvbmediasink-dbg_0.10+cvs20101006-r0_dm800.ipk


If You cant use ipkg install, use command opkg install or ipkg-extract .

Link Megaupload

http://www.megaupload.com/?d=L557AOVO

 

[hilton]

versione 1.0.26 by the ripper

Dear friends,

Enigma v1.0.26 by the_ripper and team

What is new :



Download:


E2_AZBox_1.0.26.rar

 

[Doctor Who]

ecco la nuova versione

Enigma 2 v1.0.27

Devices suitable for flashing : Elite and Premium

What is new :

- DiseQc FIX ( 1.0 , 1.1 , 1.2 Manual and USALS too )

- DVB-S2 FIX

- Integrated BlackShadow2 skin by Matrix10

- Fixed boot error


ATTENTION: Use AzUP v1.1 for Flashing this version of Enigma 2 into Your devices !!!

DOWNLOAD LINK

http://www.megaupload.com/?d=VW6A8GDI

pls read readme.txt included in E2_AZBox_1.0.27.rar archive
___________________________________________________

How to use AZUp
Because they appeared quasi instructions for AZUp use and procedures for the insertion of E2 in AZBox
I prepared a short and precise instructions - exactly what you need to do
btw , I must to mention , ignore wrong "tutorials" with wrong directions
as : you must use Format App ))) realy funny because AZUp manage partitions of your AZBox
Ignore quasi instructions and use this official instruction from the author of AZUp


We have 3 situation :
I) You have Official FW in your AZBox andyou want to install E2
II) You have E2 in yourAZBox and now you want to install official FW
III) You have E2 in your AZBox and now you want to install new/update of E2


I) You have Official FW in your AZBox andyou want to install E2
Switch off AZBox
Put usb stick with patch.bin (e2)
switch on AZBox
Follow messages on GUI for update official FW (standard procedure)
After about 1 min , your receiver will reboot
Dont remove USB Stick from AZBox !!!
wait for IP adress on VFD of AZBox
Start latest ver of AZUp
Write IP adress in AZUp (see VFD)
Click on button Update
AZUp check for resque mode, also check ver of patch.bin (E2 or official fw)
AZUp create cramfs, Create 3 partition on DOM and formatted them
Copyng E2 kernel in Flash (about 2.5 min)
Copyng E2 files in first DOM partition (about 1 min)
when get popup msg - remove usb stick and wait for reboot (Rebooting... msg on VFD)
New E2 is installed successfully


II) You have E2 in yourAZBox and now you want to install official FW

Switch off AZBox
Put usb stick with patch.bin (Official FW)
switch on AZBox
wait for IP adress on VFD of AZBox
Start latest ver of AZUp
Write IP adress in AZUp (see VFD)
Click on button Update
AZUp check for resque mode, also check ver of patch.bin (E2 or official fw)
AZUp Create 4 partition on DOM and formatted them
Copyng Official (old) kernel in Flash (about 2.5 min)
when get popup msg - first part of update is done, but dont remove USB stick from AZBOX
wait for reboot , and follow messages on GUI for update official FW (standard procedure)



III) You have E2 in your AZBox and now you want to install new/update of E2

Switch off AZBox
Put usb stick with patch.bin (e2)
switch on AZBox
wait for IP adress on VFD of AZBox
Start latest ver of AZUp
Write IP adress in AZUp (see VFD)
Click on button Update
AZUp check for resque mode, also check ver of patch.bin (E2 or official fw)
AZUp create cramfs, Create 3 partition on DOM and formatted them
Copyng E2 kernel in Flash (about 2.5 min)
Copyng E2 files in first DOM partition (about 1 min)
when get popup msg - remove usb stick and wait for reboot (Rebooting... msg on VFD)
New E2 is installed successfully


rgs,
telesat

Questa è una notizia che in molti attendevano.......

@all

SVN will be also soon online, we hope until end of this month.

So everybody can start making AzBox Enigma 2 Images.

A questo punto altri team potranno lavorare per personalizzare l'immagine e per gli utenti ci sarà solo vantaggio

 

[gorski]

Firstly, it's a complete package, more or less, no need for many additional "operations", changing of files at a specific time of the flashing process and what not. That previous attempt was quite messy and not at all looking good! This one is... well, getting there!

Secondly, the AZUp is now - finally - functioning relatively well. I only needed to reboot once and restart AZUp, in order to flash E2. That eventuality should have been in the Readme, too. The flashing is slow but it does the job and that's good enough fo me!

The "How to" that comes with AZUp is also a little bit more serious, not totally amateurish... This time round some time was taken to actually test and write it down, step-by-step, not like before with a number of steps missing, giving people a headache, sometimes giving them a really hard time, because the author was feeling lazy and irresponsible....

The_Ripper's part of the job, however, is looking much better than the teams, I have to say. Some real progress has been made, from what I can see!

Finally, I was able to:

1) get a signal with my DiSEqC Centauri 16in1 switch and advanced tuner configuration, with DiSEqC v. 1.1, changing just the "uncommitted" command, command order and LNBs;

2) scan pretty well, most of my satellite positions.

What didn't go that well? (I will skip the obvious, like remote buttons not being mapped out yet, no Standby etc.)

A) The machine needed to reboot a few times, 'till I finally got the signal and was able to scan. In other words, E2 is not yet stable, as was expected.

B) Sometimes it boots partially, so one gets pictures but no sound or the signal is quite poor, the picture is blocky and so on. On some channels/sat positions [Iran Music on HB] audio works but on others it doesn't [BBC on Astra2 or on Thor].

Once it all loads properly, one can scan and zap and so on. But one better be patient, in order to get there! And you still won't get it all, as I saw but couldn't hear, frequently.

The machine also froze a few times, as I was trying to zap.

I have a feeling the original FW was able to scan more channels - but I have to run some tests to confirm. Have to go back to original FW, scan and compare.

E2 didn't find anything on 16, 10 & 7'E, 4, 8, 12.5, 15, 18, 24.5 and 30'W.

But it's not entirely E2's fault! The whole thing is not a happy affair, as I have trees with leaves still on them, so grrrr... as they are obstructing the view... On top of that, in Scandinavia Earth has a 4% wobble, so some satellites that were barely visible get out of focus for like 6 months a year, which makes it doubly frustrating sometimes...

The HDMI = DVI, it seems to me. It doesn't give the 1080p option, yet, I'm afraid.

One must go through many menus and activate, for instance, "Multiple Bouquets" option...

AZ HD display isn't showing anything other than "100".

Having done all that I haven't had the time yet [or sleep, for that matter], to test any "plug-ins", of ANY kind... L8r...

Mind, when will they be available, on a support server, please? Emus and all the rest of it, of course...

Going back to original FW 4890 was a smooth affair, using AZUp v. 1.1, with an IP address + one command to "update". Once it copies the old kernel you can close AZUp and proceed with the usual procedure...

Cheers!

G

P.S. If this:

Because they appeared quasi instructions for AZUp use and procedures for the insertion of E2 in AZBox
I prepared a short and precise instructions - exactly what you need to do
btw , I must to mention , ignore wrong "tutorials" with wrong directions
as : you must use Format App ))) realy funny because AZUp manage partitions of your AZUp
Ignore quasi instructions and use this official instruction from the author of AZUp

...is a feeble and unintelligent, petty little attempt at a stab at me - it's laughable! You will NOT find any such instructions ["must use", "must format apps area"] in whatever I wrote. So, this speaks of the speaker, not of the addressee... and it speaks volumes, loud and clear... Create a straw man, in order to "valiantly" and "masterfully" do battle with this "monster"... Boy, you're a champ! [For crying out loud, grow up!!! ]

 

[aguda]

Enigma 2 v1.0.28

Devices suitable for flashing : Elite and Premium

What is new :

- Fix for no signal on DVB-S2 tuner for some users
- Multimedia fix for various formats by sattomy

Download





E2_AZBox_1.0.28



ATTENTION: Use AzUP v1.1 for Flashing this version of Enigma 2 into Your devices !!!​

 

[juli13]

Azbox Enigma2 v1.0.29

28/10/2010

Enigma 2 v1.0.29

Devices suitable for flashing : Elite and Premium

What is new :

- MyTube plugin (YouTube)
- Multimedia fix for various formats by sattomy

DOWNLOAD IMAGE

http://www.fileserve.com/file/msKuyN5

 

[elgeneral]

Enigma 2 v1.0.30

Devices suitable for flashing : Elite - Premium - Premium+

What is new :

- P+ tuner driver tested

- P+ FAN control enabled and activated

- some fixes in audio - volume control now is ok, mute/unmute also

- plus few more fixes

Download Enigma v1.0.30

 

[gorski]

This is important for everybody who use the last enigma2 1.0.30

By The Ripper

Hi guys,
go to rescue mode ,telnet to receiver and mount DOM, for example

#/>mkdir DOM
#/>mount /dev/hda1 /DOM

then FTP to receiver and replace file /DOM/lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko with one attached with this message.

Then just reboot.

 

[aguda]

azbox E2_AZBox_1.0.31

azbox E2_AZBox_1.0.31

Devices suitable for flashing : Elite - Premium - Premium+ - Ultra

What is new :

- Added support for DVB-S2 Tuner in Ultra model

- Volume UP and Down Mute and Un-Mute for all models

- Few more fixes

Download​

 

[juli13]

RTi core 1.0.0 BETA

22/11/2010

[B]What is new :[/B]

- Audio Fix - Fully fixed. by the_ripper

- HDMI Hotplug Fixed by the_ripper

- AzBox VFD Functionallity ( SETUP -> SYSTEM -> AZboxVFD for setup ). by DDamir

- Standby functionality FIXED by DDamir

- Multimedia Player Support ( Support for Various media formats ) by Sattomy

- SubtitlePlayer 3.0.2 ( Exclusivity, as SubtitlePlayer 3.02 is only accessible currently on AzBox HD ) by DDamir

- CrossEPG Plugin Integrated

- WebInterface AzBox HD ( Automatic selection of RCU on Web Interface Elite / Premium RCU ) by DDamir

- USB drivers support for Keyboard and Mouse by joseba


- Channel list by Daconi

WE WOULD LIKE TO SAY THANKS TO OPENSAT WHICH WAS INVOLVED TO PUT ALL EFFORTS TO SUPPORT AND COOPERATE ON THIS PROJECT

*** Please use AzUP v1.2 by telesat to Flash this new RTi core 1.0.0 BETA version of Enigma 2 in Your receiver including the KERNEL!!! , and read Release notes of AzUP v1.2 ***

*** KEEP IN MIND THAT THIS IS FULLY CLEAN CVS IMAGE, AND IT NOT CONTAIN ANY ILLEGAL FILES INSIDE ***

DOWNLOAD IMAGE

http://hotfile.com/dl/84150619/d9a3fba/RTi_core_1.0.0_BETA.rar.html

 

[Daconi]

RTi core 1.0.1 BETA

RTi core 1.0.1 BETA RTi core 1.0.1 BETA



What is new :



What is new :

- Fixed Audio sync ( now all should be ok ).

- Fixed HDMI Hotplug

- Fixed Web Interface

- Fixed Volume UP


More to come :

Work on recording and subtitles, Online software update ( Drivers and System components )

Currently under work :

- Fix for Multimedia


Download:

http://hotfile.com/dl/84592448/5dd937d/RTi_Core_1.0.1.BETA.rar.html

 

[elgeneral]

RTi core 1.0.2 BETA

What is new :

- Improvements on Audio part ( syncing )

- Card reader driver support ( /dev/sci0 ) EXPERIMENTAL

- Multimedia support ( Seeking OK, Play/Pause and Stop Ok, Audio sync )

- Wifi support for Premium/Premium+

- Time fix on VFD and Enigma 2

- HDMI Hotplug Fixed

- Fixed problem with jumping of 2 spaces on Multimedia player

- Online Software update ( drivers and python components from azbox-enigma.eu server )

- Password problem Fixed ( You can change password now )


WE WOULD LIKE TO SAY THANKS TO OPENSAT WHICH WAS INVOLVED TO PUT ALL EFFORTS TO SUPPORT AND COOPERATE ON THIS PROJECT

*** Please use AzUP v1.2.5 by telesat to Flash this new RTi core 1.0.1 BETA version of Enigma 2 in Your receiver including the KERNEL!!! , and read Release notes of AzUP v1.2 ***​

Download:

RTi core 1.0.2 BETA

*** KEEP IN MIND THAT THIS IS FULLY CLEAN CVS IMAGE, AND IT NOT CONTAIN ANY ILLEGAL FILES INSIDE ***​

 

[elgeneral]

RTi core 1.0.3 BETA Image based on : Enigma 2 from 04-12-2010

New kernel by the_ripper

What is new ?

- Applied New Audio FIX

- Interlace/Deinterlace FIX

- Fixed 30% CPU BUG ( Better stabillity )

- Better VFD Support

- Volume UP/Down fully fixed

- Fixed System clock

- Better overall stabillity

- A lot of changes on Enigma 2 ( A/V Settings EXPERIMENTAL , Welcome w i z a r d )

- Fixed Multimedia ( MKV, AVI ) now OK

- A lot of other small fixes and changes internally

We hope that next release will be RC1 ( Release candidate 1 ) as Recording and Subtitles are in internal Testing phase.

WE WOULD LIKE TO SAY THANKS TO OPENSAT WHICH WAS INVOLVED TO PUT ALL EFFORTS TO SUPPORT AND COOPERATE ON THIS PROJECT

*** Please use AzUP v1.2.5 by telesat to Flash this new RTi core 1.0.3 BETA version of Enigma 2 in Your receiver including the KERNEL!!! , and read Release notes of AzUP v1.2.5 ***

*** KEEP IN MIND THAT THIS IS FULLY CLEAN CVS IMAGE, AND IT NOT CONTAIN ANY ILLEGAL FILES INSIDE ***

Download RTi_Core_1.0.3.BETA.rar

 

[hfmls]

Enigma 2 RTi core RC1

What is new :

- New Kernel with better stability improvements.

- New Overclock driver for SAFE overclocking of Sigma SMP8634 CPU up to 370 MHz . 

( Overclocking is done On-Fly with step up size of 10 MHz, and this is VERY SAFE Method which allow You to overclock CPU of Your AzBox up to 370 MHz , 

if something goes wrong, on reboot there are routines which will reset CPU to default clock, so nothing can happen ).

- Fixed A/V Settings, VFD and Standby plugins are separated now.

- New Mediaplayer files, so DVD .iso and .ts files are supported now.

- Overall stability and speed of Enigma 2 is better and improved.

What is comming in RC2 : 

- Recording and DVB Subtitles, and other stuff regarding functionality :)

- You can expect RC2 before 31.12 or on New Year eve :D

Download RTi_Core_1.1.1.RC1.rar

 

[Daconi]

RTi core RC2 Enigma 2

RTi core RC2 Enigma 2


Change Log :

- New drivers from 15.01.2011

- New kernel 2.6.22-19 from 15.01.2011

- Recording ( Test phase )

- DVB Subtitles

- Fixed problem with HD Channels on 23.5 E ( We need confirmation for 1w and 30w HD channels )

- Standby fix

- Added Deinterlace settings in A/V Settings

- Added Welcome wizzard.py

- Some fixes in Multimedia part

- Several main fixes in enigma2 and .py files which improve overall Stability


DOWNLOAD:

 http://hotfile.com/dl/97111195/0918292/RTi_Core_1.1.2.RC2.rar.html

Rgs,

 

[serboon]

RTi core RC3 Enigma 2

Change Log :

- New Kernel

- New Drivers ( for DVB-S2 Tuners ) 19.01.2010

- Green screen fixed ( Multimedia Player, A/V Settings ( /etc/deinterlace was missing ) )

- Several Issues fixed

- Recording OK - Reserved Recording OK ( not tested from stand by )

- Issues on 1w, 30w, 23.5 e now should be fully fixed.

- UTF-8 Fix


In progress : Playback of recorded material .TS files directly from AzBox, and many other new things.

Please make as much as possible tests, and report them on our forum :



Download

 

[pe.tardo]

For ULTRA AND PREMIUM+ Users, please wait we are UPLOADING FIXED Enigma 2 RC3 patch.bin , as previous UPLOADED VERSION have a BUG

RTi Core 1.1.3 RC3 Fix ( Elite/Premium/Premium+/Ultra )

Hotfile

megaupload

 

[elgeneral]

RTi core RC4 Enigma 2

Change Log :

- New Kernel from 26.01.2011 ( Linux AZBox 2.6.22.19-19-the_ripper #216 PREEMPT Wed Jan 26 19:22:07 CET 2011 mips GNU/Linux )

- New Drivers

- Added support for .TS file Playback ( Now You are able to play recorded material directly from AzBox )

- Added support for Timeshift

- Several fixes on .py files for better stability


In progress : We will move soon to the new structure / skeleton, and we will introduce support for DVB-T, DVB-C and second DVB-S2 tuner ( just for Premium+ model ). Result of this changes will be better stability and functionality of Enigma 2 in AzBox HD Receivers.

Also, RTi team wants to express big THANK YOU to SIF Team, which also announced support for AzBox HD Devices.


Download:

RTi core 1.1.4 RC4 Enigma 2​